why the iDrop functionality included in the Publish to Web feature still inside AutoCAD 2013 no longer works...
We use this to tool to host AutoCAD Detail Libraries so users can open details in Design Review or drag and drop details as blocks, exploding the blocks and editing the details to suit the need. However, this no longer works on our webpages!
FYI, We are using IE9 both 32 and 64 Bit.
Any fix for allow Idrop to work in IE 10?
View 2 Replies View RelatedMy company just switched over to AutoCAD 2014 and for some reason the PUBLISH command is not working, or following through with the printing once we complete the required steps to plot.
We are able to select the drawings to be plotted (8"x11" sheets), then successfully bring in our page setup that we created with one of the drawings to be plotted (which we use the same template with the same limits on ALL of our 'drawing templates' we design with.
After we hit the PUBLISH button at the bottom it goes into the background and just stays there with no errors or anything After a little while we end up just having to cancel and plot individually.
We used TrueView to BatchPlot which is identical to the batchplot(publishing) in ACAD 2014 WITH NO ISSUES!
I am having problems using the publish command in Autocad 2013. The command works fine in 2010. I am able to plot normally in 2013. As you can see from the attached screenshots my settings are the same in both versions. The command freezes up during plotting of the second drawing in any group.
View 4 Replies View RelatedToday while teaching AutoCAD Publish to Web features / wizard in Release 2012 the resulting published Web Site is NOT allowing the iDropper to function. The iDropper is visible below each of the drawings and the folder for the PTW is sitting on the local drive. When the iDrop icon is selected a NOT AVAILABLE icon image appears as if the function is dead in the water.
View 1 Replies View RelatedI have never had trouble publishing to DWF's or PDF's from the sheet set manager. Now recently, when I try, It asks where I want to save it then briefly pops up the progress box. Nothing happens, though. The box dissappears and it doesn't create any files. I have tried changing the publish options as well as the publishcollate variable. This is happening to any files I try it with including ones that it worked on just last week. Have I gotten a setting changed somewhere? I tried to run a repair on AutoCAD, but that didn't work?
View 2 Replies View RelatedThumbnail icons ( iDrop) not displayed within content browser catalog, why is this?
View 1 Replies View Relatedeach attempt to save as or publish / plot to DWF in Autocad 2014 fails (Device not found) other than the device what am i missing?
tried from the Output tab on the ribbon as well as the application icon save as , publish, and plot all with the same result
I'm using Window 7 Home edition and AutoCAD 2014.
When I publish multiple pages with either pdf or printing, it only prints the first layout. I tried to repair/reinstall AutoCAD and the problem still exist.
My CorelDraw suddenly stopped to produce PDFs. The dialog "Publish To PDF" opens fine, but when pressing "Save" it won't do anything after a while of loading. Usually it starts to process the file and a progress bar is shown, but no such is shown and no file is produced. The settings opens fine and no problems there.
Re-installing has been tried without resolving the issue. Different files has been tried, same problem.
I use 2012 at home and 2013 at office, I would like to PUBLISH more than one layout in grayscale, now I`m having it in color.
how can I define the plot style/ page setup within the PUBLISH command?
When I select multiple PS tabs and Publish them all to a pdf, the pdf file that is created has a small lock next to it UNLESS I select AutoCAD's default location (my documents). If I select a project folder and name the pdf whatever I want, it puts the small lock. If I let it put it wherever it wants, it doesn't.
Even if I change the default location through Publish Options, it will add the lock. I need to be able to select different folders every time so I need the option of selecting where to put it.
How to stop it from making files with the lock icon on them?
Just as of a week ago, it was brought to my attention that my publish stamp has changed to "C:usersjoshuaappdatalocal empacpublish_3412Gi1.dwg" (for example) even thou the location on the drawing I am working on is located on a server, which is normally H:/...../.../...../ Could this be from a adobe pdf driver? I dont know what changed this,
View 1 Replies View RelatedWe just recently updated to AutoCAD 2013 from 2011. We use Publish to create PDF files that we send to our customers. When I tried to create a PDF in 2013 some of my drawings are oriented landscape while others are oriented portrait. I went back to 2011 and used the same drawings and it created them all oriented landscape.
Am I missing a setting somewhere in 2013?
I am having some issues with the newly added Sequence Publish function added in Prerelease 4. I have tried using both the built in AAF export option, and have tried a custom DPX image sequence with EDL export. The function is able to do the final sequence render in preparation for the publish, however it doesn't ever actually publish either the DPX sequence or quicktime movies I request it to. I am left with a folder which contains the edl or aaf file, but no corresponding media ever gets written out. When I check the jobs tab in the mediahub, it just shows "waiting" as its status, but it never progresses past that point. I have tried this function on three different timelines with different media, and it still won't write out the publish sequence. I am able however, to export the sequences to a quicktime as I would normally.
View 3 Replies View RelatedWhy doesn't my created collection (not a smart collection) keep the arranged order of photos in that collection when I then ask the Publish Services to pull that collection over to be published? Why should I have to rearrange that collection of photos to the squence or order they are in on the Collections side?
View 2 Replies View Relatedmy publish button is not pressable so i go to file>publish options once im there i choose a folder on my desktop to export it to but it never shows up... (also i can only press on the "save" button doesnt give me the option to publish.. do you have to save it somewhere special? IM TRYING TO CREAT AN OAM FILE FOR ADOBE MUSE... i can save it to my desktop but then it just apears to be html.. what am i doing wrong????
View 1 Replies View Relatedhow to change the publish settings so that it prompts asking for a location to save when I publish to PDF? Right now it's just saving to the default output location and I need it to ask every time where I want to save the file.
View 3 Replies View RelatedI have C3D 2010, 2011, and 2013 installed on my pc. I use the Publish command almost daily, and haven't had any serious issues with it when using 2010 or 2011. But in 2013, when I publish it just sits on the same screen and never actually publishes. I have tried turning off Publish in Background, I have checked that the printer support paths are the same as in 2010 and 2011, and I have tried Publish with different Page Setups.
View 3 Replies View RelatedAs stated, my wipeouts are working just as desired when I plot single layouts, but when I publish multiple layouts they do not work at all.
View 2 Replies View RelatedWhen I am working on several drawngs at the same time, I use the Publish command to plot them as a group. However to save the settings as a DSD file for future use, every open file needs to be saved. Why is this? Is there a way to disable that requirement?
There is no reason I can think of besides "by design" for this. The DSD file is only a list of drawings and their plot settings and is not dpendent in any way I can think of, to whether or not one its drawings is open and not saved.
when I trying to publish in single-sheet file. so I type publish on my command bar, then I chose publish to pdf but when i try to click on publish options to set the location where I need to put the pdf files the publish window freeze. same thing when i click on add sheet button.
NOTE: I have this problem especialy when I used AUtoCAD from home. to use AutoCAD from home I made borrow licence.
after 2013 was installed in my colleagues computer he now has the option to include Layouts when opening the publishing command, which didn't happen before. It is a slight pain removing these from the selection to be published and I was wondering how I get it to only select models and not layouts when opening the publish command as default.
View 5 Replies View RelatedUsing AutoCAD 2013, myself and several other coworkers have encountered an error message when creating a pdf with the publish command. I attached a screen shot of it.
We never experienced this in earlier versions. It doesn't happen 100% of the time, but it has been recurring more in the past month. I have restarted the computer after receiving the message and then invoked the publish command after restart and it was successful. I'm not going to do this every time I publish, nor do I see the need to turn off background plotting. That just seems like a bandaid fix.
I even tried publishing with different page setups to determine if it would react differently to any page setup, but it doesn't. I attached a view of my publish window, as well.
I have this heavy issue, i can't send to back a line, an object or a hatch under other lines. In 2012 i used this feature a lot but in 2013 it's not working very much, maybe 1 time out of 10 and i absolutely can't say why.
HPDRAWORDER = 1 seems to work with a new hatch.. but i can't redraw everything.
Let's say i put an entire floor plan into block then draw over it. (I don't want to start a Xref discussion please) i can't send the entire bloc to the back.I used to do that with 2012, 2008, 2007.. but it's 2013 it's not working, is there a way to correct that?
I used to drag and drop an image from my desktop in a drawign in 2012 version.
Now is not working and I get the following
Let me know the solution for Getting "AutoCAD LT has Stopped working" while attempt to print in HP Laserjet M1536 dnf MFP Printer. I have tried the following steps but still i am getting the same Error.
1.Graphics Driver has been updated.
2.Printer Driver has been completely removed and reinstalled.
3.New configuration for this printer has been added.
4. AutoCAD LT 2013 Service Pack 1.1 has been installed.
System configuration: Win 7 -64 bit,4 GB ram, Intel-i3 2120 processor, Intel(R) HD Graphics.
Everytime I try this command (3DCONFIG) it says " A newer version of the graphics card and driver database that is used for performance tuning is now available. Update now?" I click yes and get "Performance Tuner failed to update. Please check your network connection and make sure you have write permission to the file"
I made sure the file is not set to "Read-only" but it still doesn't work.
I recently installed AutoCAD 2013 and was excited to try viewbase to create 2D drawings from complex 3D geometry. The problem is that despite selecting "from model space" the program launches the dialog box looking for an Inventor file, and there doesn't seem to be a way to simply work from the file's model space? I even made a new file from scratch with a simple 3D shape and ran into the same problem.
View 2 Replies View RelatedI have custom menu items that call code in .DLL files that are loaded using Netload in the ACAD.LSP file. However, since upgrading to 2013, the DLLs don't seem to load and the menu links say the macros don't exist.
View 9 Replies View RelatedWhen I try typing "L" for line and hit enter (space bar), then click the mouse to draw a line nothing happens. The command is active and the grips are active like the command is ready for me to click mouse to draw a line. Also, hitting the space bar again does nothing.
View 9 Replies View Related