i have a road layout consisting of 3D ploylines. i want to create a surface over this layout.... i have tried but it will only seem to work on straight sections of road and not the intersections.. And i know it would be simple in civil 3d but i dont have access to that.
View 5 Replies
Right now i am using model space only i didn't use the layout but i want create the A3 layout. And I need to attach our customized title block into the layout, how to make it the A3 lay out size and how to attach the title block into layout ?
View 2 Replies View RelatedI want to create a dialog consisting of multiple buttons. As a result I want value which button was pressed by user.
The script (shortened to problematic part):
// I'm looping through elements on layer 'warstwa' from kolorStart to kolorStop, 'k' is used for number buttons
for (i = kolorStart, k = 0; i <= kolorStop; k++, i++) {
myButton[k] = myButtonGroup.add ("button", undefined, warstwa.pageItems[i].contents);
myButton[k].label = warstwa.pageItems[i].contents;
myButton[k].onClick = function () { wybranyKolor = myButton[k].label; myWindow.close(); }
}
The result:
But buttons don't work, wybranyKolor returning 'undefined'. If I change "wybranyKolor = myButton[k].label" to "wybranyKolor = myButton[k-1].label" I get proper answer but it is the same for all buttons so it looks that all buttons have the same action assigned. How to get each button to has unique name which can be passed to variable?
Probably I can achieve the same with radio buttons' list but with buttons it is one click less for the user.
I am creating P&P sheets for my road. I created view frames, and when I got to create sheets, I pick "all layouts in new drawing". I go to open the new drawing up, but all that shows up/tranfers is the profile and alignment, nothing else comes over ( proposed linework, existing linework, etc.)??????
View 4 Replies View RelatedI am having difficulty in creating a surface for my road in 3d at this section, the points given are along the center lines and so far have been fairly straight forward for the fall of the road as there have been no junction up until now.
I am not using 3dpoly at this point, just plain old lines.
Road 1 displays where i am having issues and Road 2 display how it looks in 2d format (only at an angle)
So today I was creating a road centerline to make into an alignment. The road has many curves. So I was making circles and connecting them with lines while snapping from tangent to tangent. So far, so good.
Went I go to trim the circles using the lines I drew tangent to tangent, it says that there are no intersecting edges. WTF? When I zoom way in, the line is not touching the circle. Now, I know that visually that is NBD. When I run a distance check, snapping from endpoint to perpendicular, there is a measurement of zero. UGH!
So to get work done I've been having to break the circle and the 2 points, then erase the rest. This is such a PITA and I've never had anything like this happen.
P.S. I'm running Civil 3D 2013.
The top line is the circle, the bottom is the line tangent to it.
tangent issue.jpg
I've been doing a layout drawing of a plant
The floor of the plant is split into different faces to denote walkways etc.
When i saw they were missing from the drawing i thought it could be because i haven't 'included surfaces'.
I clicked on include surfaces on the model and it worked!
However, when the green arrow update finishes, they disappear, and the include all surfaces box is unticked! i didn't untick it, so what did?
Inv 2013 64bit
I need to model road with same elevation. But also need to model ditch along road which has a slope of 0.2%. how can i make a ditch with slope.
View 2 Replies View RelatedI'm trying to create a surface under my 'existing ground' surface. There is shallow rock where one of our projects is located and using geotechnical data I want to create a 'rock surface' at the known rock elevations. I just want this surface for visual reasons and do not want it to interact with the existing ground or pipe network.
I have 4 places along the roadway where I know the rock elevations. I created new points around each known point with the same elevation so there would be more than just four points on the surface and so I could make it the width of the road allowance. But when I look back to my profile of the road, it shows the existing profile drop to the rock surface at each place that I created points for the rock elevation. Not sure how to make it so the existing ground surface doesn't pick up the new points I added for the rock elevations.
I'm having trouble creating a solid from different surfaces.
I already tried the surface stick, but it seems that it is still not a solid. (How can I check this?) The part is still yellow. If I try to apply the sculpt feature it says:
Modeling failure: A valid body cannot be constructed based on the selected inputs.
It 's a quiet complex shape. You find here: [URL].....
I'm modeling a couple different alternatives, and I want to make an inside mask on EG where my FG surface will be.
Is my workflow the problem, or are surface masks just buggy?
I've created three EG surfaces, EG-1, EG-2, and EG-3. I pasted the dref'd EG into each one, so now I have three copies of EG, one for each design option. Each surface is on its own layer.
I have three FG surfaces, one for each design, FG-1, FG-2, FG-3. I want to use the outer border of each FG in turn to make an inside mask for its respective EG surface. I can make one, masking FG-1 out of EG-1. When I move on and try to make the mask for FG-2 to mask EG-2, no mask is created. Is it not working because I pasted the same original EG into each of the three EG option surfaces? Do I need to promote the original dref'd EG and copy it two more times, so each mask is applied to a completely unique surface?
Win 7E 64-bit, Intel i7, 12 GB
C3D 2012
What method will you choose to create 3D solids and surfaces from existing objects in autocad?
View 4 Replies View RelatedTrying to create a surface with an exisitng drawing with 3D polylines. Trying to change the suface style with no luck, the only style available is Standard?
View 8 Replies View RelatedI have created 2 surfaces of a matierial that is buried, using drill hole data. I have a surface for the top, and then a surface for the bottom of this material. I then created a 3rd suface comparing these 2, creating an isopac contour showning the thickness of the material. My question is this:.....is there a way to make the zero (0) contour show up? I have a .5 contour interval, but 0 doesn't generate. Could i be missiing something in the settings?
View 9 Replies View RelatedOur company, was contracted to create a DTM of a residential neighborhood using our Lieca HDS C10 Laser Scanner. Utilizing the Leica software I was provided LandXML file that contained a 2ft by 2ft Mesh surface along with breaklines for the edge of roadway, driveways and sidewalks, which was imported into Civil 3D 2012.
Our client now wishes for us to provide them with a breakline for the crown of the roadway. My first thoughts on calculating such breakline was to set the Contours at an interval of 0.05' to identify the crown of the road, then drawn the break line along the crown based on contours.
Is there a way to automatically create a Breakline from Exisitng Surfaces?
My question is "Can I create surfaces, profiles, & alignments using AutoCad2012?"
I know if I had Civil3D2012 I could do it, but can it be done with the Regular version I should say.
At my previous job I was using Civil3D2010 (darn economy Government job did lay offs) and now I'm using CAD2012 with new employer and I'm realizing that there are a lot of functions/commands that I don't have.
I am working on a project, I was given a file with the contour already mapped out. I am tasked with finding volume of a fill I had to create. I made a 3-D polyline at the elevation I want my fill to start from and going down to my final grade. How can I make surfaces with my map. I do not have any files to make the surface off of. What is the easiest way I can make a layer, TIN has already been done but no surfaces are in the file.
View 2 Replies View RelatedI created a volume surface between the as-built and design surfaces, now I would like to show the points that display the cut/fill depths between these two surfaces. I tried modifying the surface property of that volume surface but doesn't seem to offer what I want.
View 6 Replies View RelatedI have this 3D refrigerator block from GE and I want to extract 2d front, plan, sides. I tried flatshot and all the sol's solprof, soldraw, solview and I get a message saying there are no solids or surfaces to extract.
View 2 Replies View RelatedI am looking for a method to convert 3d surfaces or regions into 3d faces so that they can be imported in RISA. I currently have a model with 3d faces (see attached), but do not know a method for adding the openings shown in red.
View 9 Replies View RelatedIs it possible applying textures on solid surfaces in AutoCAD 2012?
If yes, how do I apply textures on them?
I have a small project that I'm working on that inserts a new layout based on a user selected template size (A, B, C or D sizes). I need the program to insert the layout along with the titleblock geometry from the existing A, B, C, or D dwt files.
I know how to add a new blank layout. However, I'm having some trouble determing how to insert the titleblock geomtry. I've read a number of posts on here related to layouts, and while they were informative, none of them covered exactly what I need to do.
I am creating an A3 pdf of a layout at a scale of 1:200. I am creating the pdf from model space, but when I print the pdf off, it is not quite to scale. What am I doing wrong?
View 5 Replies View RelatedI want to add a new layout to drawing with paper size "A3". this is want i am trying with. We had a VBA script before as shown bellow.
For Each tlAcadLayout In ThisDrawing.layouts If tlAcadLayout.Name = "A3" Then blnLayout = True tlCurMedia = tlAcadLayout.CanonicalMediaName tlConfig = tlAcadLayout.ConfigName oldOrg = tlAcadLayout.PlotOrigin Exit For End If Next With tlAcadLayout .RefreshPlotDeviceInfo .ConfigName = "None"
[Code].....
How to explode a 3d layout grid after creating it.
View 1 Replies View RelatedIf it is possible to create a sectional view from my model and place that section in a new viewport without changing my other viewports. I have several viewports in my drawing but I need a certain detail section of the model but I do not want any of my viewports to get affected.
I can not have anything added to my model, since later on I will be using this drawing as a xref and I only want the main model to be carried over and not a section detail.
I am producing a drawing which contains a sample hydraulic layout which depicts all of the various hydraulic components we use.
I would like to add a table next to each part that lists the size variation agains our Part no's.
I am running civil 3D 2014 and have several lisp file that I have added to my startup suite. I am creating layout tabs for plan and profile sheets and use my lisps continuously and then all of the sudden it tell me that it's an "unknown command". I have closed the program and reopened the drawing an I realized that my start up suite is now empty.
View 2 Replies View RelatedI'm trying to create an assembly that consists of two curbs sub-assemblies that are tied to independent alignments with a pavement section in between them. I have been successful in actually creating an assembly with the two curb sections, but I cannot figure out how to define a line or pavement section that will connect one gutter to the other.
I have one curb tied to the main baseline and the other tied to an offset. I have assigned horizontal alignments and profiles to the baseline and the offset. The curbs actually place where I want them when viewed with the section editor. I had thought that I could use the LinkToMarkedPoint subassembly and simply attach it to the gutter of one curb and to a marked point on the gutter of the other curb, but I can't get it to actually work.
Again, the curb alignment and profiles are completely in independent one another, and I need a way to define a pavement section (or just a surface) between the two gutters.
We have a map of our primary lines in an ESRI .shp file, that superimposes nicely on our other shape files, for shoreline and rivers and everything else, that works fine. As part of some project planning I'm doing, I'm making a series of layouts, each taking a snapshot of an area, with a revision cloud around the lines we're planning to replace.
I loaded the map up this morning and everything was as I saved it, but as I was creating a new layout and zooming to the correct region in my view port, every single revision cloud I drew disappeared. As did all the annotations and other labels I'd made - absolutely everything that isn't from a database just up and vanished.
I've turned off all the database links, there's nothing covering them up, I had none of them selected and used no delete commands, all I did was create a new layout via copy and adjust the viewport on it, they're just gone.
I'm trying to create a web layout, but I'm not sure about how big I should make it. I was also wondering how you would import the animations into the weblayout with imageready.
View 6 Replies View Related
