I was working on some work files, and generally a box comes up saying that there are unresolved references and asking what to do. Usually I hit the x and everything works fine, but this time i accidentally clicked the checkbox to automatically ignore unresolved x references and now certain files will not load the references even though the path is correct and the files are there. I was wondering how to undo this check box. I imagine it has to be a variable or setting somewhere.
There are several drawings that when I try to open I get a popup message "References - Unresolved Reference Files". The message box is clear with only the border and the description in the blue bar at the top of the message box. AutoCad LT 2011 locks up and I have to do a Task kill. The same drawing can be opened by most of our other users, but some experience the same issue. When AutoCad is restarted, I get a "Drawing Recovery" empty/clear popup message message freezing AutoCad AGAIN, requireing another Task kill. I have to open a 3rd time, and if I had another drawing open, it's gone and doesn't appear to be recoverable.
If an assembly contains unresolved file references, when I try to open it Inventor allows me to try and resolve this with the Resolve Link dialog. But if I choose to skip all for whatever reason, once I've opened the assembly there's no easy way for me to see which sub-assembly/assemblies contain the missing reference. I have to expand folders, patterns, assemblies, etc. until I find the one with the little question mark next to it. I prefer to work with unresolved links in this way sometimes because it just makes more sense working with the model than a bunch of file paths and file names in the Resolve Link dialog. But it's nearly impossible with large assemblies where the unresolved links may be burried deep.
Is there a way to list or somehow see which assemblies contain the unresolved links once I've already opened an assembly?
I am looking to batch convert my IDWs to AutoCad DWGs without having to go through and manually open each file and save as etc. Right now I am using the export files task to do this. I have saved an *.ini file with all the settings I want and successfully create the task. After running the task it fails to convert all the files giving me an error message that says "File has unresolved references". This shouldn't be the case though because the IDW's open and reference the part/assembly files fine.
Autodesk Inventor Professional 2010 32bit edition SP3
I have unchecked resolve file references, etc, and still basically spends 5 minutes looking for files i told it not to look for. Why doesnt it just open the assembly or drawing, without waiting for ever?
I have recently configured various borders for our Inventor software and have now turned to AutoCAD to do the same.
Within Inventor you can specify grid references around the border. eg A-F along the top and 1-5 on the vertical. Can this be done with AutoCAD 2011????
I have a jpg file that I needed to apply some transparency to and saved it as a png file. I now want to delete the jpg file from the folder but it's being referenced in several drawings, andI don't know which ones. Is there a way to reverse the function of Reference Manager (perhaps with a different app), i.e. find all the drawing files that reference my jpg file?
I'm having is that this is happening with a dynamic block. I don't know how it got this way...some 'genius' in my office went into this file and screwed something up, and saved it...so now I'm left with the task of fixing it.
When I go into the block, it opens as a regular drawing, with a dynamic block inside of it...as opposed to opening in the block editor. I just need to know how to get this back to the way it should be, without having to redraw the entire thing from scratch. I made a few scrap-copies of the drawing to fool around with and I can't find a solution. I tried deleting the block and purging it, I tried exploding it, and I tried saving it directly from the block editor...nothing worked.
I use this palette all the time and keep the icon displayed (in hidden form) on every session that I open. I started AutoCad this morning and "external reference" icon was not displayed on the screen. I went to the tools tab and selected the external reference palette. A box was displayed that could not be hidden and all screen function were stopped until I closed this box.
I went to customize tool palettes and compared it to the properties palette and they looked the same. I want to get my external reference palette function back to the way it was.
How to avoid nested references reload every time I open autocad drawing. In some drawings I have twenty nested references. I really need to avoid reload each reference.
I have a problem understanding how undo marks are added to the undo stack.In the code below a fan of lines are draw in a random location.If you run MTest a few times, the AutoCAD Undo command will remove the fans one at a time.
If you run MMulti to draw 10 fans, the AutoCAD Undo command will remove all the fans in a single step.I want to be able to remove the fans one at a time.I thought that a StartTransaction / Commit pair would act as markers for the undo stack, but this isn't working.
Tested on AutoCAD 2010 VS 2008 <CommandMethod("MMult")> _ Sub testmult() Dim i As Integer For i = 1 To 10 Call testdraw() Next End Sub [code]....
I have a brand new workstation and only on certain files it will say FATAL ERROR: Cannot write to undo file (probably disk full) when ever I save. I have tried cleaning out the TEMP file, turning off the Undo function, auditing the file and its xrefs, and recovering the file. It was a file that was on the server, but I have pulled it to my local machine and I have also increased the amount of virtural memory avaiable.
I think it'd be so cool to be able to replay your entire undo history of a picture, so you can see and show others how you proceeded on a picture you made. That way, it's never necessary to capture screen video for like 10 hours and stuff..
So first you'd need to add an option to save the undo history (so that you always keep the history from when you started). Then you'd need an option to playback the undo history.
I have an assembly that has a component that has not only been deleted from this assembly, but has been removed from the vault. When I try to select a similar file on my local, just to get through this I get the followong error message and this cycle keeps going in circles. Wanting me to point to where this deleted file is.
This assembly remains unresolved and as a result of that I cannot check it into the vault.
Another frustrating things about his is in the dialog window that wants you to select a different file, there is no option to either select from the CC or the vault. Why?
I just hope the only solution is not to recreate this assembly. Because this is a subassembly used in upper level assemblies. Speaking of which those upper lever assemblies wont check into the vault either because of this issue.
Inventor Suite 2012 Windows 7 (Colossians 3:23-25)
I am currently using IV 2012 Pro and have run into some issues. When the company first started to use this program, they left me in charge to create our Title Block and Border templates. For our logo, I used a bmp file and placed that in out TB template. Recently I have replaced the bmp image of our logo to an ACAD block. My problem is when I open our template, I still get the unresolved link error prompting me to find the bmp image of our logo. Even though I have removed it from the template.
I was working on my project today when the window popped up telling me to reload my pavement file. When I reloaded the file, the reference said it was unresolved. I tried to open that file directly, but it would not open.
I always "Configure Default Template" on start-up, changing Measurement Units to mm and Drawing Standard to ISO. After Ok,
"the default template (standard.*) will be replaced according to your selected drawing standard or measurement unit. The original default template will be copied to Old Templates folder as backup. Do you want to overwrite?" Yes.
I have created a series of parts which i have assembled and saved on my USB. I have placed fasteners from Content Center and saved. When i change computer, and attempt to reopen my assembly files, i get a "Resolve Link" window, as seen in attachment, to which i don't know how to respond, and end up clicking "skip all", which results in assembly with unresolved components.
What are the steps i should have been taking to avoid ending up with unresolved components, assuming i cannot avoid changing computer.
In an assembly of a gymnasium divider curtain, I create a path on a 3D sketch which snakes its way upward through a series of grommets. A circular profile is then swept along the path to create a new part - a cable. The cable is its own unique part document and is saved and then vaulted in a job-specific folder. The curtain assembly has several instances of this cable. Everything looks fine until the assembly is closed and later opened for editing. When the assembly is opened, the cables show up in the browser as "Unresolved." Graphically, they have disappeared.
Windows 7 Professional, 64-bit Inventor 2013 / Vault Collaboration 2013
I have drawings I reuse for different designs. I sometimes insert a parameter value from a part into a drawing dimension for different reasons. When I copy these drawings and no longer reference that particular part, the dimensions in question get deleted by turning off the "Preserve Orphan Annontations", but the fact that the dimension that referenced the parameter value is deleted does not affect the link, and the drawing tells me there are still unresolved parts! Is there someway to remove these references from the drawing? I can write a macro if I have to, just not sure if there is some other way to do this, or even if a macro can do this? I can apparently just pick some other part in the job that doesn't even have that parameter and the unresolved warning goes away, but is that sufficient? I would think an option in the resolve file dialog should let you delete the reference instead? Using IV2012.
I was recently updating an assembly which contained a part that had been subsequently deleted from my folders. I skipped it while opening the assembly, then deleted the part in the Model Tree (and replaced it with a different component). So, to summarize, the assembly no longer has the part in the Tree, and the part does not exist anymore on my system. These parts and assemblies have not been Vaulted, so that should not be an issue either.
My problem is that every time I open the assembly, it wants me to resolve this deleted part, and I have to skip it every time just to proceed. Once the file is loaded, I get no other issues, no "red cross" items, just a question mark next to the file name at the top of the Tree indicating that the file needs to be resolved.
The old part is gone; I tried recreating it using the same file name, and using the same third-party SAT file from which it was originally generated, but Inventor detects that it's not the original part and won't accept it.
How to get past this "part resolution" issue?
Autodesk Product Design Suite Premium 2013 Inventor 2013 64-bit Edition Win7-64, 8-core Intel® Xeon® CPU W3550 @ 3.07GHz NVIDIA GeForce GTX 560 Ti 454 GB HD, Intel® ICH10R SATA AHCI Controller SpaceNavigator, 3.14.2 / 6.14.0 / 3.18
When I open up multiple assemblies at the same time Inventor cant find some of the part files, even though they are on my system. Many times if the part is in an assembly more than once, some of the instances will be there and only one or two instances will be "unresolved", of the exact same part. I can open each assembly one at a time and it will be fine, but that can be time assuming. I wasn’t able to find any other threads with a similar problem.
Constraint to unresolved reference geometry. Finding these magenta broken links items in a sketch is time consuming. Is there a macro that can delete them all?
I am having trouble with Iparts getting a red cross due to dimensions and constraints to unresolved reference geometry. If, for example, I have Hole 2 dimensioned from Hole 1 in one member and in another member I suppress Hole 1 and Hole 2 I get an error stating (correctly) that the sketch for Hole 2 has a "Dimension to unresolved reference geometry". I understand why I should get this error if Hole 2 was unsuppressed and Hole 1 was suppressed but why do I get this error when they are both suppressed.
If I get this error on a member that has these two holes suppressed and I switch back to a member that has them both active the error dissapears. I guess in the end this is a question for Autodesk. Can you set up Iparts so that when a feature is suppressed Inventor completely ignores it instead of still trying to resolve it. This functionality is a major headache for us because we don't want to leave models with the Red Cross on but if we want to dimension our features appropriately (ie referencing other, related features) we have to leave a model with errors in it.
See attached part. If you switch within the first 2 members there are no errors, if you move into the last 2 members you will see the cross highlight.
During the creation of an Enterprise CUI, I somehow was left with Unresolved Menu groups, as shown in the attachment. Any thoughts on how these can be removed?
I've just set up a PS plotter as per this link: URL....
Hatches in AutoCAD are being displayed really poorly (see attachment)... Basically they've been simplified to polygons instead of complex regions.
And secondly, my plot is cropped to paper size. The work we're doing is significantly larger then typical paper sizes, I realize I could add a new extremely large paper size, but is there a way to ignore the paper size?
I am having a survey plan both with points and contour lines. Points are comming from the main road and contour from the outside areas.
I want to be able to make the surface ignoring the contours between the breaklines of the road since any contour inside professional survey is giving me errors on profiles and everything.
