When I try use ' TCOUNT ' with mtext, the numbering increments not by the value I enter (ie 1,1) but rather by the number of lines in the mtext; 3 lines of mtext would count 1, 4, 7, 10, 13...). BUT this only happens if the 'enter' button was pressed to start a new line.
View 6 Replies
I have multiple singular text objects on my screen and I want to convert them to mtext so I can use the Background Mask option within mtext on my drawing. how to quickly select all the text and convert it to mtext without it combinin ginto 1 mtext?
View 9 Replies View RelatedWhat I'd like to know is if there's a way to automatically update the sheet number in separate dwgs.
For example: at work we have 45 separate dwgs in multiple disciplines. Is there a way to have the "x" in "Sheet X of 45" update automatically on each sheet? This way whenever we insert/delete a sheet in the set it automatically knows which number it is in regard to the set as a whole.
Running Autocad 2008 btw. Full Version.
I am counting all the doors in a project in autocad 2008, but It is becoming to be a real pain in the but because every time I change some door, I have to renumber almost every door .. I am sure there is an easier way to do that.. I am using a block with atributes and I would like to know if there is a way autocad can number automatically each block atribute.. I know that with mtext it is very easy (I use in my parking spaces) but with blocks I dont know how to do it . like each time I put a block the number gets updated, and each time I take one off it gets updated again..
View 9 Replies View RelatedWhen i use mtext in autocad 2011 i cannot select bullets and numbering as it is greyed out. I did uncheck bullets and numbering by mistake and now cannot select it.
View 3 Replies View RelatedPossible to use a block, such as a hex or circle with a number centered, instead of the out of the box number with a period? I have Key Notes that need numbers with a hex, and Construction notes, that need numbers in a circle. I can label these items with multileaders with a user defined block, but when I type out the notes using mtext, I want to use the exact same blocks to number the notes that correspond with my multileader label. I have been manually inserting blocks along side of my un-numbered mtext notes.
View 4 Replies View RelatedI have a whole bunch of labels that are single line text that I want to convert to Mtext. I have been using the Express Tools TXT2MTXT command but that only works on one label at a time. If I select all the labels at once using this command it gives me one long Mtext string. Is there a way to convert all of the labels to mtext, but still maintaining individual entities?
View 5 Replies View RelatedI need Photoshop to save my files with automatic consecutive numbering.I have lots of image files with several photos and/or negatives scanned in each image file. I need to individually select every photo or negative to be able to cut and paste in a new file and then saving every pasted photo/negative in a separate image file.
Now, I have automated the cut and paste process, and also recorded some effects with Actions, but when I come to saving the files I always get prompted to enter a file name no matter if I record the save as "Save" or "Save as".
Is it possible to make Photoshop saving each file automatically with an automatically assigned number? Example: Photo0003.tif, and the next file Photo0004.tif, and so forth. Just so I won't need to enter a file name manually each time?
Saving by Batch processing is not a solution since every file I open have to be divided into like 12 new separate files and saved with different names.I use both CS2, CS5 and could sit with another machine with CS6 if thats whats needed for the job.
I work with CorelDraw X5 and I wonder if there is a way to insert an application of page numbering that is automatic, which automatically update the page when I add or remove a page, as in the word.I got a number through the macros but the problem is the numbers are fixed and not change. And numeracy not appear on new pages.
View 4 Replies View RelatedHow to make a multileader style with automatic background masks? How to select all the multileaders in a drawing (via a script or macro) and turn on the background masks?
I know I can quick select the mleaders in a drawing, but I'd rather just run a script or macro to correct the mleaders.
I just loaded AutoCAD 2012 on Friday and have noticed that when I use annotative text or mtext in paper space when printing or previewing the text it rotates 90 degrees to vertical, but is horizontal in the drawing. Only does this with annotative text or mtext, non annotative text and mtext remains horizontal when previewing or printing.
View 3 Replies View RelatedI'm searching an external RTF-Editor which is quicker then "MS Word" and better then the internal editor. Some applications use this RTF-modules.
Can one of these used by Autocad?
I've rotated my UCS 45° at Z axis and create a "mtext" and "text".
But when I check the angle of the "mtext" in properties palette is 0°.And the angle of the "text" is 45°.
why AutoCAD showing different angle for both objects which are in the same direction ?
[URL]
Would like to know how to set automatic text masking for call outs with leaders. Is there a way?
View 3 Replies View RelatedWhy is this happening?
The dwg was fine, then it crashed while changing from modle space to paper space...
When i recovered the dwg, EVERY MTEXT I try to edit becomes rotated vertically and stays that way when i close the edit box...
I do not recall hitting any buttons or making any keystrokes without my knowing...
Is there a way to get my text back to Horizontal and stay that way?
I tried setting the MTEXTFIXED to: 0, 1 & 2.
NONE of these options changed anything.
I NEED to have this fixed. more importantly, i need to know why this is happening sop that i can take steps to prevent this happening in the future...
I am currently working with the latest CAD available.
I need to lay one of our existing blocks ontop of every power outlet on a floorplan (the power outlets are currently shown as a simple shape (eg. either a rectangle, triangle or circle) with text next to it.
There are hundreds of power outlets, so if there is a lisp routine for replacing any part of the power outlet with the block, eg. replacing text/mtext with a block or replacing a pline with a block.
I have found a very successful lisp routine for replacing circles with blocks, but this obviously only works on the power outlets that are shown as circles. So a simpler way of looking at it could be a lisp for drawing a circle around mtext/text then I could simply use the circle to block lisp to place the blocks.
I use Mtext quite a bit and I am trying to convince others in the office that it's a good thing (versus single line text in long paragraphs). One of their concerns in the shape of the Mtext. For instance, when you use Mtext, you type into a nice rectangle that you can change the size of. What they have to do on occassion is instead of having a nice rectangle of text, they have to make it like a triangle. So in this case, single line text can be adjusted so that the end of the sentences make an angle.
Is there a way to do this using mtext? Or is there an lsp that will work?
When I insert text with either the TEXT command or MTEXT command, the text is displayed mirrored. This doesn't seem to have anything to do with the MIRRTEXT variable because that is used when I'm actually mirroring the text. In my case, the text is mirrored as soon as I insert it. How can I get it back to normal? Is there a variable I'm missing?
I'm using AutoCAD LT 2012 .
How do you start the numbering on multi text from a No. higer than 1?
View 3 Replies View Related3rd party tool which didn't match our scaling needs the file is a fas so I have tried to reverse engineer the whole function using trial and error. The following code works perfect except we need multiple (x amount) lines of text I have at current the M txt function which mimics and is effective for today however we need all lines to be individual.
I’m playing round with a loop but how to achieve my need..He had a 3rd party tool which didn't match our scaling needs the file is a fas so I have tried to reverse engineer the whole function using trial and error.
The following code works perfect except we need multiple (x amount) lines of text I have at current the M txt function which mimics and is effective for today however we need all lines to be individual.
;Starting lisp program...(defun C:REDtext ();Creating Layers (if non existant)...(command "layer" "m" "TEKST-1.5mm" "lt" "continuous" "" "c" "1" "" "");Memorising previous layer...(setq MYOLDLAYER (getvar "clayer"));Setting requierd layer...(COMMAND "LAYER" "SET" "TEKST-1.5mm" "");Setting variable "MYHEIGHT" to "DIMSCALE" x 2...(setq myheight (* 2 (getvar "DIMSCALE" )));Requesting and storing usser defind point...(setq MYPOINT (getpoint "Start punt :")); Requesting and storing user defind text...(setq MYTEXT (getstring T "Nieuw tekst :"));Placing text...(command "text" MYPOINT MYHEIGHT "0" MYTEXT); Restoring previous layer...(setvar "clayer" MYOLDLAYER);Closing lisp program...)
why does mtext sometimes have a box around it when i move it and how do i get rid of it.
View 9 Replies View RelatedIs there a way to create strike through text in Mtext [TG 44.890] ? If I create it in Word and insert it in the Mtext editor. The line comes in but looks like an over score.
View 3 Replies View RelatedHow do I get numbering like the attached image using text in photoshop? I have photoshop elements 9. Basically I just want to be able to type out numbers within boxes, or some other solution that will give me this desired effect easily.
View 9 Replies View RelatedI just started getting strange characters on labels that I print from a data table. The process I use is to use mtext with fields to get infromation from the client abbreviation, job name and part numbers onto labels used to keep track of parts and for assembly.
I have used this for some time with no problems but today..... Attached is the template I use and a nested drawing using the same template but with actual data. The one with data works with no problems. I'm pretty sure no variables have changed between them.
Is there a setting somewhere that keeps the Mtext Editor in the same place? I believe in previous versions if you specified "OldEditor" it would keep the editing box at the same size and same location that you specified. In ACAD 2012, if I change to "Old Editor" I get an error message - see attached.
I have tried MTEXTfixed at 0 or 1 with no luck. I do understand that you can zoom in and out to change the size of the text when editing.I run dual monitors and like to have the mtext editing on the screen without my drawing.
I have a drawing with mtext objects. I can not edit the the defined width through the properties palette. I think this is just some setting but I haven't been able to recall/ find it.
View 6 Replies View RelatedI have a bunch of dwg's that were converted from dgn's using Microstation V8's batrch convert utility. In many of them there are these Mtext objects that, when I hover over them, or when I pick them to change their properties using the properties dialog, slow performance way down. I have to wait about ten seconds for the machine to catch up.
This can get pretty annoying since it ouccurs when I merely cross over the objects when I am not in any command whatsoever.
The text objects are referring to a font that I do not have installed on this machine. I think it defualted to using simplex.shx as a result. I did not get any errors or warnings about the missing shx when I opened the file.
Using Civil 3D on a 64 bit Win 7 Dell POS - everything is up to date.
C3D 2012 on 64bit Win 7 all up to date
Dell Precision 7core 8GB RAM
NVIDIA Quadro FX 1800M
LDT/C3D user since release 12
How to change MTEXT to MLEADER? We often have texts on our drawing - mostly MTEXT and used line to the text.
Recently I started using MLEADER due to that it has added line to the text and looked more professional with consistent line setting out within the text.
The problem is that I don't seem to find a way of converting MTEXT to MLEADER. From the internet search, it seems that adding a LISP created by someone seems to do trick but I would prefer to do from the Autocad software so that all colleagues can use.
I know Autocad can be set to always save to a particular version number, but can it be set so it always saves back to whichever format the drawing loaded was originally? If I load a 2004, it saves as 2004. If I load 2007, it saves as 2007, etc?
View 3 Replies View RelatedIs there a way to insert CAD blocks into the Multiline text editor, much like you are able to insert a block into a Table.
I am asking for the sole purpose of Plan Notes. When we lay out Plan Notes originally we place the note bubble next to the line of text it represents. When we have to come back at a later time and edit the mtext, sometimes add a line our users are in a rush and forget to re-align the note bubbles with the text. If there was a way to insert the block into the text editor and have it still be able to edit it.
Is this a feature in 2013?
AutoCAD MEP 2013
Window 7 pro 64 bit
E5440 (8 CPU) ~2.8ghZ
16GB RAM
NVIDIA QUADRO FX 3500 2270MB
I received a drawing with Mtext notes has a different color from the layer they belong...the user change the Mtext note color from the Mtext editor .
Is there a way to change the color for these Mtext notes to by layer color globally and with one command?
