Photoshop :: Possible To Save Files With Automatic Consecutive Numbering?
Apr 11, 2013
I need Photoshop to save my files with automatic consecutive numbering.I have lots of image files with several photos and/or negatives scanned in each image file. I need to individually select every photo or negative to be able to cut and paste in a new file and then saving every pasted photo/negative in a separate image file.
Now, I have automated the cut and paste process, and also recorded some effects with Actions, but when I come to saving the files I always get prompted to enter a file name no matter if I record the save as "Save" or "Save as".
Is it possible to make Photoshop saving each file automatically with an automatically assigned number? Example: Photo0003.tif, and the next file Photo0004.tif, and so forth. Just so I won't need to enter a file name manually each time?
Saving by Batch processing is not a solution since every file I open have to be divided into like 12 new separate files and saved with different names.I use both CS2, CS5 and could sit with another machine with CS6 if thats whats needed for the job.
View 10 Replies
ADVERTISEMENT
May 12, 2011
simple programme for consecutive numbering of forms while digitally printing? e.g. adding consecutive numbers to a batch of pre-printed invoice sets. One original, but numbers on it increasing or decreasing as they are printed.
View 6 Replies
View Related
Oct 2, 2009
What I'd like to know is if there's a way to automatically update the sheet number in separate dwgs.
For example: at work we have 45 separate dwgs in multiple disciplines. Is there a way to have the "x" in "Sheet X of 45" update automatically on each sheet? This way whenever we insert/delete a sheet in the set it automatically knows which number it is in regard to the set as a whole.
Running Autocad 2008 btw. Full Version.
View 9 Replies
View Related
Jul 16, 2007
I am counting all the doors in a project in autocad 2008, but It is becoming to be a real pain in the but because every time I change some door, I have to renumber almost every door .. I am sure there is an easier way to do that.. I am using a block with atributes and I would like to know if there is a way autocad can number automatically each block atribute.. I know that with mtext it is very easy (I use in my parking spaces) but with blocks I dont know how to do it . like each time I put a block the number gets updated, and each time I take one off it gets updated again..
View 9 Replies
View Related
Nov 6, 2011
I work with CorelDraw X5 and I wonder if there is a way to insert an application of page numbering that is automatic, which automatically update the page when I add or remove a page, as in the word.I got a number through the macros but the problem is the numbers are fixed and not change. And numeracy not appear on new pages.
View 4 Replies
View Related
Oct 29, 2012
When I try use ' TCOUNT ' with mtext, the numbering increments not by the value I enter (ie 1,1) but rather by the number of lines in the mtext; 3 lines of mtext would count 1, 4, 7, 10, 13...). BUT this only happens if the 'enter' button was pressed to start a new line.
View 6 Replies
View Related
Dec 3, 2002
Question about saving images through an action. According to the 7.0 help manual, I should leave the filename as the default if I want my files to be saved with consecutive names (i.e. image01,image02, etc).
I created an action to do a number of things before saving my file.. everything works great except that photoshop keeps saving my file as 'untitled-1.jpg,' which overwrites the previous file of the same name. What can i do? Feel free to IM as well.
View 6 Replies
View Related
May 7, 2013
AutoCAD LT 2012...I have set up automatic file saving to save files every 10 minutes but files are not saved. I have deleted most old files from the "temp" folder thinking it may be full but the save function is still not working. Sometimes drawings do get saved but only at random intervals and definitely not every 10 minutes.
View 1 Replies
View Related
Jan 7, 2014
I have created master assembly that has rules to 'save as' the assembly and parts to different locations and with different names. This master assy has links to excel file to get different names
In the same way I am looking the drawings (for both assy and parts) needs to be created and 'save as' to different locations. These newly generated drawings should have links to newly created parts/assembly.
I am able to 'save as' the master drawings to different locations but these newly created drawings still has links to master assembly/parts.
View 1 Replies
View Related
Nov 13, 2012
I have my automatic save turned on and set to 10 mins. I can visual see Civil automatically saving (as I have to wait a few seconds for the process) but it is not creating the temporary files.
I used to work fine, and I can see the last file that was created - a couple of weeks ago, but now it has just decided to stop creating these temporary files.It really makes this option useless if there is no temp file to get my lost information from when I crash.
View 9 Replies
View Related
Apr 11, 2012
I am trying to create a baseline assembly driven by ilogic. When the baseline gets changed, most of the parts get replaced, but a few change size. I would like to re-name the top level assembly, as well as the parts and sub assemblies that change. We use a Vault sequential numbering scheme. How do I extract the next number from the sequence from Vault in iLogic?
View 2 Replies
View Related
Jun 21, 2013
Some my .psd files (CS6 Photoshop, MAC OSX 10.7.5, Processor: 2.5 GHz Intel Core i7) automatically resize to a percentage. I can't figure out what the cause is, and it will not allow me to change it back to 100% to slice out images for web.
File Type is .psd - RGB 8 bit/color
Fie Dimensions are 1400px by 10,800px.
File Size is 60MB
The file is extremely slow to open and adjust anything within the file as well, not sure if the issue is related. I am working off of my desktop not off of a server.
View 2 Replies
View Related
Dec 31, 2012
I'm trying to batch save a series of PNG animation files using the File => Scripts => Export Layers to Files action in Photoshop CS5. Each layer has a transparency and a shadow that have been converted from layer effects and "baked" into the image. I tried the batch save but it turned all of the transparencies solid with white backgrounds. Also the image size was not cropped to the dimensions of the object on each layer.
Lastly, is there a way to edit the numbering for each file? When the images were exported it created a lengthy set of numbers after each file name when all I need is a 00 padding.
View 1 Replies
View Related
Mar 15, 2011
My Autocad MAP 2011 keeps crashing every time it does an automatic save.
View 1 Replies
View Related
May 30, 2013
Using 2011 on W7 64 bit machine. When I try to set the location for the "Autosave File Location" or the "Temp Dwg File Location", I get the attached error message. I've done everything I know to fix it to no avail. I am on my personal laptop, I am an admin will full control rights of course, I've made sure the folders are not read only...
View 7 Replies
View Related
Mar 22, 2013
When I open, say, 10 images at once, I see (10) individual "restore down" windows atop each other;I then maximize top window & process; when I close top window:in my CS1, next window=image auto-maximizes window & sliders will appear if I zoom to 100%
in my CS2, next window=image is still "restore down" & I have to click windows upper right "Maximize" icon
Question: how to get CS2 "behaving" like CS1?
View 2 Replies
View Related
Mar 6, 2013
I know Autocad can be set to always save to a particular version number, but can it be set so it always saves back to whichever format the drawing loaded was originally? If I load a 2004, it saves as 2004. If I load 2007, it saves as 2007, etc?
View 3 Replies
View Related
Dec 29, 2011
I have the page numbering macro. It works on new files; however, it doesn't work on specific saved files. What could be wrong with those files? Is there any way to enable the page numbering macro in those files?
I use Corel Draw X3, by the way.
View 4 Replies
View Related
Feb 6, 2013
I have done numerous searches on the internet to find out how to stop Photoshop from placing files as a smart object. I followed the suggestion of going to Edit > Preferences > General to uncheck the "Place or Drag Raster Images as Smart Obejct" but that option does not appear in Photoshop CS4.
View 2 Replies
View Related
Jun 17, 2011
I face problem to draw angles. Normally angle are defined clearly but if they show the angle b/t two lines . Then may problem to understand . More clearly view image. I want to draw line with these angles more quickly and easily.
View 9 Replies
View Related
Dec 8, 2013
Organizer starts searching for missing files. files that i have deleted, and the programme just keep on forever searching for those already deleted files. When i try to turn off that function, the organizer just stops. Running the program on Imac 2010.
View 3 Replies
View Related
Apr 1, 2011
When I'm trying to select files to load through CorelDraw X4's File command, it makes automatic copies of the files I've selected if I hold down the CTL key too long (maybe 5 seconds). This is extremely annoying.
Is there a way I can turn off this features? I've tried to find an option that controls this, but can't.
View 14 Replies
View Related
May 9, 2013
I am early in my learning curve on Lightroom. I understand that changes are not automatically applied to an image file but rather kept in a Lightroom database to preserve the original (non destructive). However, that is not a goal of mine. After making changes to a file or adding keywords, I want Lightroom to automatically update the actual files (in my case jpegs) so that I do not need to export them to be used elsewhere such as in a slideshows etc. I have found settings that imply the "metadata" is or can be updated, but I do not know if that is the "develop" changes I made or the keywords or if I need to do that every time before I close lightroom. Right now, I do an export of my entire folder of 20,000 images after each session where I make changes and then I use that export as a source for my automatic backup programs and supplies a continuous slideshow on another machine.
Maybe another way to say it is: after making changes and closing Lightroom, I want to be able to take an image from "My Pictures" folder (which contains all my images) and know it has the latest changes made and the latest keywords embedded. I do not want to have to export these files. first.
View 3 Replies
View Related
Apr 11, 2012
what if i have points that are non-consecutive? the survey crew is new at this so i'm getting some higher number points that line work wise appear in the middle of lower number points. the figure seems to draw numerically. is there a way to do a figure by proximity?
Dell Studio XPS 9100
Intel Core i7 CPU 930 @ 2.8GHz
12GB Ram
64 bit
C3D 2012 SP3.0
View 3 Replies
View Related
Sep 26, 2012
how to turn off the automatic creation of log files in my drawing folder?
I have unchecked the <Options> <Open and Save> <Maintain a log file> but they just keep on appearing and manually cleaning them out is a real pain...
View 2 Replies
View Related
May 16, 2011
In Designer Pro 6 Under Options, Backups, there's a check box that says, "Backup open documents on program close and restore on program start." Sometimes I want some of my open documents to reopen on program start (I think this is great!) But my problem is even when I first close those documents (that I don't want to open on program restart) before closing XDP6, when I reopen XDP6 the ones that I closed reopen. What can be done to change this behavior if I want to keep the box checked?
View 1 Replies
View Related
Jan 13, 2014
I have an Olympus OMD EM5 and I notice that when RAW files are imported into Lightroom, an automatic correction is applied by default. It appears to read this directly from the metadata of the RAW file. How to disable this?
The issue is that this correction means that the RAW files in Lightroom differ from both the camera viewfinder and JPG output in terms of composition - sometimes barely so, and sometimes significantly depending on angle, zoom etc. This is undesirable behavior in a lot of instances where you want the RAW to match your chosen composition.
View 11 Replies
View Related
Apr 2, 2013
Automator script to backup Smoke 2013 database and other vital files? If not, where could I find a list of those files?
View 5 Replies
View Related
Mar 8, 2012
So why did you remove the possibility to correct ca manually?
View 7 Replies
View Related
Nov 28, 2012
Why my photoshop CS6 64 bit in windows 8 can't SAVE and SAVE AS any files?
it's ok for my Photoshop cs6 32bit,but there is not reaction when i use command file->save or file->save as ,also CTRL +S and SHIF +CTRL+S in Photoshop 64 bit
View 3 Replies
View Related
Nov 6, 2013
I'm running Photoshop CC 14.1.2 on Mac (OSX 10.8.5) and whenever I use "Save As…" Photoshop marks the original file as edited and asks me to save it again before I close it - even if I have not made any changes before or after using "Save as…". This behavior is breaking some of my actions and bothering me quite a bit.
View 3 Replies
View Related