AutoCad :: Automatic Numbering Of Block Attributes?
Jul 16, 2007
I am counting all the doors in a project in autocad 2008, but It is becoming to be a real pain in the but because every time I change some door, I have to renumber almost every door .. I am sure there is an easier way to do that.. I am using a block with atributes and I would like to know if there is a way autocad can number automatically each block atribute.. I know that with mtext it is very easy (I use in my parking spaces) but with blocks I dont know how to do it . like each time I put a block the number gets updated, and each time I take one off it gets updated again..
View 9 Replies
ADVERTISEMENT
Oct 2, 2009
What I'd like to know is if there's a way to automatically update the sheet number in separate dwgs.
For example: at work we have 45 separate dwgs in multiple disciplines. Is there a way to have the "x" in "Sheet X of 45" update automatically on each sheet? This way whenever we insert/delete a sheet in the set it automatically knows which number it is in regard to the set as a whole.
Running Autocad 2008 btw. Full Version.
View 9 Replies
View Related
Oct 29, 2012
When I try use ' TCOUNT ' with mtext, the numbering increments not by the value I enter (ie 1,1) but rather by the number of lines in the mtext; 3 lines of mtext would count 1, 4, 7, 10, 13...). BUT this only happens if the 'enter' button was pressed to start a new line.
View 6 Replies
View Related
Apr 11, 2013
I need Photoshop to save my files with automatic consecutive numbering.I have lots of image files with several photos and/or negatives scanned in each image file. I need to individually select every photo or negative to be able to cut and paste in a new file and then saving every pasted photo/negative in a separate image file.
Now, I have automated the cut and paste process, and also recorded some effects with Actions, but when I come to saving the files I always get prompted to enter a file name no matter if I record the save as "Save" or "Save as".
Is it possible to make Photoshop saving each file automatically with an automatically assigned number? Example: Photo0003.tif, and the next file Photo0004.tif, and so forth. Just so I won't need to enter a file name manually each time?
Saving by Batch processing is not a solution since every file I open have to be divided into like 12 new separate files and saved with different names.I use both CS2, CS5 and could sit with another machine with CS6 if thats whats needed for the job.
View 10 Replies
View Related
Nov 6, 2011
I work with CorelDraw X5 and I wonder if there is a way to insert an application of page numbering that is automatic, which automatically update the page when I add or remove a page, as in the word.I got a number through the macros but the problem is the numbers are fixed and not change. And numeracy not appear on new pages.
View 4 Replies
View Related
Mar 29, 2011
I have overlaid Autocad points on a polygon topology representing tree stands. I now want to somehow attribute the points so that the points within each stand are numbered sequentially in a top to bottom, left to right order starting with number 1 and prefix each point number with the stand number. These attributed points will need to be exported to a shape file for use in ArcGIS.
How this might be accomplished aside from manually typing in the attributes. I've considered using the Text Numbering tool in Express Tools but Map requires blocks for Point topology attributes. I've also considered object data but I don't see any way to automate the data.
I am using Civil Series/LDT/Map 2004 but I also have C3D 2011, ArcGIS 9.2, Microstation v8i Select Series 1 and Dotsoft Toolpac if any of those tools would offer a better approach.
View 1 Replies
View Related
Jan 23, 2012
From the attached image you can see what I'm talking about.
(left=original, middle=ROTATE, right=PROPERTIES)
When I rotate blocks using ROTATE command everything is fine, but when I rotate blocks using PROPERTIES my attributes get messed.
I need to rotate several blocks at once with PROPERTIES, because I don't have time to rotate each one separately.
The same thing happens when scaling blocks, but this was resolved using the command BSCALE in the command line.
View 5 Replies
View Related
Oct 30, 2012
Possible to use a block, such as a hex or circle with a number centered, instead of the out of the box number with a period? I have Key Notes that need numbers with a hex, and Construction notes, that need numbers in a circle. I can label these items with multileaders with a user defined block, but when I type out the notes using mtext, I want to use the exact same blocks to number the notes that correspond with my multileader label. I have been manually inserting blocks along side of my un-numbered mtext notes.
View 4 Replies
View Related
Feb 14, 2013
Is there a way to create a block with attributtes that automatically complete x, y, z, lat, long for the insertion point of the block?
I am trying to complete text in paperspace that will automatically fill in the lat long of a point in model space without using a table. I have tried field insertion with reference to a cogo point, but it doesn't give options for position on a cogo point. If I pick a block with attributes, it will let me pick any attributes, and x,y position for the block.
Cogo points show all the information I need to propagate in the properties....but how do I get that to translate into the text using fields or some other method?
Dell Precision T3600 - Windows 7 64-bit
NVIDIA Quadro 600
Intel(R) Xenon(R) CPU E5-1607 0 @ 3.00GHz 3.00GHz
8 GB ram - Two 1TB raid
View 9 Replies
View Related
Oct 26, 2012
When the block is in a drawing and I click it, it takes me to block editor.
However if I go to it in block editor and test block it allows me to change the attributes.
Why does clicking the block go to block editor and not allow me to change its attributes as it does when I test block.
View 9 Replies
View Related
Oct 31, 2013
I would like to change sub block from a visibility after setting it. Here an example of code to get the right visibility, I don't really know how to update a sub block by name or by handle(seems to change inside dynamic block).
Dim Block As AcadBlock
Dim BlockRef As AcadBlockReference
Dim DynEntBlock As AcadEntity
Dim DynObjRefH As IAcadBlockReference
[Code]........
View 9 Replies
View Related
Apr 8, 2013
I can insert a block with block attributes using the Inter op very easily:
Dim theBlock AsAcadBlockReference
Dim pickScreenVBA = myDoc.Utility.GetPoint(, "insert the hydrant")
theBlock = myDoc.ModelSpace.InsertBlock(pickScreenVBA, "Hydrant", 1.0#, 1.0#, 1.0#, 0)
Dim varAttributes AsObject
varAttributes = theBlock.GetAttributes
varAttributes(0).TextString ="3 Ports"
varAttributes(1).TextString ="Salt water"
Works great, but when I try using the non-inter op, all the example insert new Attributes and not add block with existing attribute (so I end up with duplicate attributes for each block - i.e "Salt water" attribute is added to the block each time I run the code),
Are they any examples that does the same as above using the non-interop code?
View 2 Replies
View Related
Dec 12, 2013
I'm trying to add some attributes to an existing block using the block editor, but after I save and close it I cannot see any 'placeholders' despite adding a default value and the attributes work fine when I double click the block.
I've tried using the ATTSYNC and BATTMAN commands but nothing works and there are no invisibility states applied to either the attribute or block and all layers are switched on.
I just tried making a quick block from scratch and it seems to have the same affect, except the default value will show, but no 'placeholder' shown if left blank.
I swear with previous version I could see the tag when a value hadn't been applied, so is it that the version I now use (2012) does not have this feature or it's disabled?
View 9 Replies
View Related
Sep 19, 2011
I'm trying to chnage the text of the sheet number and total sheet number attributes for each layout in my drawing. I have code that adds and deletes the specified pages, now I need to edit the attributes to reflect the correct page and correct total amount of pages. Here is my code, based on my old VBA version.
I know there is a problem with the line:
For Each item In myBTR.ObjectId
I've used a number of websites and books, but I would really like to find something that teaches about block tables, block table references, block table IDs so I can get a better understanding of breaking stuff down to get the info I need.
Public Sub updatePageNumbers()
Dim myDWG As Autodesk.AutoCAD.ApplicationServices.Document
Dim myDB As Autodesk.AutoCAD.DatabaseServices.Database
Dim myTransManForPageNumbers As Autodesk.AutoCAD.DatabaseServices.TransactionManager
Dim myTransForPageNumbers As Transaction
[Code]....
View 6 Replies
View Related
Mar 2, 2012
Level label for displaying the plus heights in facade and section that is dynamic. I want to insert the block in 0,0,0 and then when i copy it i want it to change the level hight automatically.
View 6 Replies
View Related
Dec 13, 2012
using AutoCAD 2009 (vanilla)
I got too smart for myself today in bringing an old drawing up to current standards...Everyone seems to want their block attributes to be zero - I have blocks where the attributes are best when they match the rotations of each blocks.
I have an old drawing that was rotated (as it should be) at approx 2deg.
I used a lisp routine to global edit all the blocks that needed to be at zero. BUT for some reason (and after hundreds of blocks were corrected), I noticed I now have two blocks that should NOT have been in the set have had their attributes rotated to zero....and the attributes should be at the same rotation as their block's rotation.
Because those two blocks have a fixed tic mark, I can click on the mark to see what the block rotation is, then rotate its attribute to that rotation, but I have hundreds of blocks! One-at-a-time sucks....
Any chance there is a GLOBAL way to edit an attribute rotation to match its own block's rotation?
View 2 Replies
View Related
Jun 7, 2012
We have specialized electrical schematic drawings on what is termed roll-drawings. These roll-drawings are simply 12" tall and variable width type drawings. We've had some as short as 24 inches and as long as 900 inches. As a result we use these section dimensions to distinguish circuit boundaries. It's not a real dimension, just a way to distinguish what circuit is located where. I've tried to recreate it using a block for improved automation as currently we just use a lisp routine that draws an arrow and lines. It looks like the screen capture of my block below. Is it possible to have the inside endpoints of the lines automatically stretch outwardly toward the arrows as the attribute Value changs?
View 3 Replies
View Related
Apr 27, 2012
Is there a way to have a block (called test, for arguments sake) within this block we have text (attribute / fiield or whatever).
Now I have an alignment that has stations set every 10 units and on those stations I have inserted the block "test" as part of the alignment label style.
I can get the block inserting correctly, rotation the direction I require etc but what I need is for this block to report the station number.. ie 10, for the first 20 for the second and so on.
Is this possible?
View 1 Replies
View Related
Nov 13, 2013
I am currently working with fx parameters and iLogic to drive a model and it's corresponding drawing to change based on a single user parameter.
I have managed to get the drawing to update both the scale of the views I need and the size of the sheet with the change in parameter using the following rule:
IfParameter("EB75551.ipt.Rise")<1801Then
ActiveSheet.ChangeSize("A1", MoveBorderItems :=True)
ElseIfParameter("EB75551.ipt.Rise")>1800Then
ActiveSheet.ChangeSize("A2", MoveBorderItems :=True)
EndIf
However when i attempt to use this with the title block using the function:
ActiveSheet.TitleBlock="My Title Block"
in place of the sheet change size it brings up the error message:
Error in rule: Drawing Title Block, in document: Drawing
The parameter is incorrect. (Exception from HRESULT: 0x80070057 (E_INVALIDARG))
I have read elsewhere that this is due to me having prompted entries for the scale and drawn by fields, however when i use the function designed for prompted entries: ActiveSheet.SetTitleBlock("Other Title Block", "promptedEntry1", "promptedEntry2")
It fills in the prompted entry fields from the code and if i change these entries in the "edit field" option they are overwritten when it is updated.
Is there a way have the prompted entries when you open the drawing fill in the "promptedEntry1" field in the rule so that I can use the rule? Or am I going about it the wrong way?
I should point out i'm new to iLogic and no-one in my workplace can use it so each person changing the "promptedEntry1" field to the scale they wish isn't a wise move.
View 2 Replies
View Related
Feb 29, 2012
Function ReadDWG(ByVal DWGName As String)
Dim AcadApp As AcadApplication
Dim AcadDoc As AcadDocument
Dim Extracted_title As String RichTextBox1.AppendText(Path.GetFileName(DWGName)) RibbonLabel1.Text = "Opening AutoCAD"
[Code]...
I am using the above code to read block attributes depending on the name. But now I need to read the active drawing (drawing will be open and should read from the active document). In the above code I have referenced interop.dll. without that can I retrieve the block attributes. How to read the block attributes from the active document.
View 2 Replies
View Related
Mar 20, 2012
If there any lisp for the below sequence:-
1) select a few group of pre-set block name
2) change all these pre-set bloack name to a layer " Eye Bolt"
At moment, i have several kind of block such as example of "EB10", "TEB10","EB8","TEB8" and etc.
View 9 Replies
View Related
Aug 7, 2013
Using ACAD2014LT. I want to use the first variable attribute value as a variable in subsequent attributes in the same block. This will be extracted and used for tag references in a PLC program.
Along the line, i know I can change the enclosed character ( ' ), but can I remove it?
View 3 Replies
View Related
May 22, 2013
How Can I Get All Block Attributes and change it
View 9 Replies
View Related
Apr 24, 2013
I have this one file .txt with this features:
Point North East Z Description
1 8618063,68 312415,09 75,87 T1
2 8618138,38 312428,89 70,57 B_RIO SECO
3 8618132,23 312427,75 71,90 ARENAL
4 8618126,23 312426,64 72,50 ARENAL
5 8618112,22 312424,06 73,77 ARENAL
6 8618099,78 312421,76 75,35 ARENAL
7 8618089,51 312419,86 75,84 ARENAL
8 8618132,23 312427,75 71,94 J
9 8618112,23 312424,06 73,88 J
10 8618099,82 312421,78 75,36 ARENAL
11 8618089,48 312419,87 75,85 E_1
And I generated this code for read this file and insert one block with attributes for each line of text…..
If txtPath.Text() = "" Then
MsgBox("Select DB .txt.", MsgBoxStyle.Exclamation)
End If
On Error GoTo ControlErroresBD
Dim AcadDocPt As Document =
[Code] ....
‘To the end of this line I can insert the block,,,,,,, but I don’t know how to write the attributes…… I tried with the next code but it doesn’t work…. My bloque has 3 attributes and every tag named with “PN”, “CD” and “CT”
Dim AcadObj As Entity
For Each acObjId As ObjectId In AcadBlockRef.AttributeCollection
AcadObj = AcadTransPt.GetObject(acObjId, OpenMode.ForWrite)
Dim acAttDef As AttributeDefinition = TryCast(AcadObj, AttributeDefinition)
[Code] .....
View 9 Replies
View Related
Apr 20, 2012
I have used the FDO to connect to my SHP files. I have used one data attribute to get a rotation for my blocks. I have also used a feature Label to display the text I am interested in.
When I save to DWG, the feature labels come in as Text. I would like the text to go to the correct block attribute.
Is there a way to do this? I did not see anything in the Style Editor to use my blocks' attributes, only the geometry.
I am aware of using MAPIMPORT to set attributes from the data, but they do not come in rotated, and I have more conditions on which block to use, not just one field to decide the block name.
View 2 Replies
View Related
Mar 15, 2012
I'm trying to edit the attributes in a titleblock using VB.net. The block name is "Titleblock". It is already inserted into a drawing. My program does not need to insert it. It only needs to find the reference, for all layouts, and update a couple attributes for the titleblock on everylayout. I know some of the basics, but get confused with blocktables, and blocktablerecords.
Here is a piece of code I was experimenting with. With this code, I'm trying to get to the attributes, and read an attribute value for a drawing number. It fails when I try to assign a value to the variable blkreftitle.
Dim
doc AsDocument = Application.DocumentManager.MdiActiveDocument
Using docLoc AsDocumentLock = doc.LockDocument
Dim db AsDatabase = HostApplicationServices.WorkingDatabase
[Code]....
View 2 Replies
View Related
May 10, 2011
I have 3 attribute in one block , i made 3 options for visibilty1
so i need in visibilty (1) i can show only the text 11
and i need in visibilty (2) i can show only the text 22
and i need in visibilty (3) i can show only the text 33
View 8 Replies
View Related
Nov 5, 2012
I have a autocad file displaying room layout of a floor. Each room has two blocks. One for displaying the Fixture / Fitment data and second for Room details (Room no, Area).
Is there a way we can merge the two block attributes in a single block with both attributes.
View 1 Replies
View Related
Sep 27, 2011
I need reading the values from an Mleader object that contains a block. I can get attributes from normal blocks with no problem, but I am struggling with this.
I can get all the way up to casting the attributes, but when I try getting the Attribute Reference, the code crashes. How do I get the AttributeReference from the AttributeDefinition? As it is now, if I declare the AttributeDefinition, the values return as nothing.
Dim acDoc As Document = Application.DocumentManager.MdiActiveDocument Dim acCurDb As Database = acDoc.Database Dim acEd As Editor = DocumentManager.MdiActiveDocument.Editor '' Start a transaction Using acTrans As Transaction = acCurDb.TransactionManager.StartTransaction() Try Dim acBt As BlockTable =
[code].........
View 2 Replies
View Related
Aug 11, 2011
I have this code to insert a block (the block has Attirbutes) it bring in the block but strips the attributes. Here is the C#
[CommandMethod("PUTBLK")] static public void test() { string comp = "C:\test.dwg"; Document doc = acadApp.DocumentManager.MdiActiveDocument; //Editor ed = doc.Editor; Transaction tr =
[Code].....
View 3 Replies
View Related
Dec 3, 2011
I wish to insert a title sheet dwg, which has attribute definitions, as a block in another dwg. I can insert it, and if I explode it, the attribute definitions appear. Otherwise they are not added to the database.
I am using standard code, which I can attach. it starts
Dim btr As BlockTableRecord
..
Dim blk As BlockReference = New BlockReference(ip, blkid)
' insert block
..
btr.AppendEntity(blk)
If btr.HasAttributeDefinitions Then
ForEach attID As ObjectId In btr
etc.
but btr.HasAttributeDefinitions = False
View 7 Replies
View Related
