I have to look at a PC tomorrow that has either CS5 or CS5.5, it's running Windows 7 64 bit with 16 GB of Ram.
The error being given is: "Unable to allocate 0.000Mb of memory. Either decrease the memory requirements for the rendering of this frame or install more RAM. (123803/U.Mem Tracked Object)"
I bought this AE file URL...Here is the error message I get when trying to render...After Effects error: Unable to allocate enough memory to render the current frame (18172 x 18172 @ 8 bpc). Either decrease the memory requirements for the rendering of this frame, or install more RAM. (12805). For more information, see adobe.com/learn_ae_mem (7 :: 66)
I even tried to render the project without making any changes. No luck
Is my laptop inadequate for this type of work?When it says - (18172 x 18172 @ 8 bpc) is that the resolution it's trying to output? The project is 6 seconds long and 1920x1080 resolution. I can render it at half resolution, but not at the 1080 res.
I'm getting the same error on a project. Originally created in CC/Mac, down converted to CS6/PC (I don't yet have the exact version release). The sequence is 10 layers deep, and throws this error if we try to preview. If 8 of the 10 layers are turned off, then the sequence will preview as normal. So, is this a bug and is there a CS 6 version release that fixes this, or am I looking to reallocate RAM?
View 5 Replies View RelatedI have a early 2011 MBP with 8GB of ram.
View 8 Replies View RelatedI do have problem with my newly installed CorelDraw X5. Before X5 we used Corel 12 in our company.
I have project file (150 MB) with lots of text, bitmaps, vectors - about 100 pages. File opens but I can't save it. I always get OUT OF MEMORY error. I even tried to divide this file into 2 smaller parts but still doesn't work.
What I noticed - Corel X5 after clean start (without opened project) takes about 80MB of RAM in task manager. When I open project usage changes from 80MB to 1,2GB. While saving it takes 1,6GB of RAM and it crashes.
To compare - Corel 12 and after opening same project file Corel 12 takes much less of memory - about 770MB and it works without problem.
Where from comes this memory usage difference?
My PC:
Windows 7 - 32bit
4GB of RAM
Intel Core2Duo 2 x 3.0GHz
700GB free space on drive C:
I'm running After Effects CS6 11.0 on MAC OSX and everytime I attempt to apply text, either by creating a new text layer from the drop down menu or dragging open a text box I get "Unable to Access Resource P_TextSmallCaps_Sm_N_D (type png)"
Is this a png file missing from the program, a fixable bug or what?
I'm running Photoshop Elements 5.0. Everything was working fine til this mornin. I've had the program for about a year now. When I tried to open it this morning I got this error message that popped up.
It says:
Unable to continue because of a hardware or system error. Sorry, but this error is unrecoverable.
I've tried repairing the program. That didn't work. Restarted my computer. That didn't work. Uninstalled the program and tried opening it again. That didn't work. I'm at a loss! I really need to get into my program b/c my work is there. I tried opening some of my files (they are located in my Pictures folder) and they pop up with the same message.
I have a Nvidia GeForce 570 GTX, and I just did a clean install of the lastest driver. For some reason I only have a total of 1,251 VRAM to allocate in photoshop CS6 3D preferences. Using 3D with only 1,250 vram is pretty choppy, and if i'm not mistaken the 570 should have atleast twice as much VRAM available.
NOTE: Everything outside of 3D runs great.
A error has popped up saying:
Could not complete your request becasue there is not enough memory (RAM).
Machine Spec :-
Machine :-- Windows 7 Pro 32 bit
CPU : -- 1 x Pentium Dual-Core CPU E5500 @ 2.80GHz (2792 MHz)
Motherboard :-- DG41WV
RAM :-- 4 GB DDR3
Videoadapter :-- Intel(R) G41 Express Chipset (1024 MB)
Hard Disk :-- C drive free space 23.8 out of 43.9
D drive free space 39.8 out of 48.8
E drive free space 37.6 out of 48.8
F drive free space 71.1 out of 91.2
Problem :-- When using the Mixer Brush tool,the photoshop stop responding and showing error.
Error Massage :-- "Could not use the Mixer Brush tool because there is not enough memory(RAM)"
Just installed CS6 about a month ago and at different points of taxing the program and my system and on various tools or events in Photoshop, I get an error that tells me there is not enough ram to complete the task.
I'm using CS6 Extended 64-bit and my comp specs are:
Windows 7 Pro
16 gigs of DDR3 memory
Intel i-7 second gen chip
ATI Radeon 5500 with 2 gigs onboard memory
And all of my stuff is up to date - including PS. I've allocated 75% of the system memory to PS in the preferences.
when I am converting RAW images via CS3 - ACR, I get the message "Not Enough Memory"
This happens when I try to convert more than 25 or so images during one Photoshop session. If I close down Photoshop and then reopen the program I can usually convert another 25 or so images before getting the message again. When I used CS2, I would be able to convert 100 or so RAW images with no problems.
I am not sure what to do.
My system is a Dell XPS with an Intel Core 2 Quad, with 4GB of ram.
I have given 80% (or 1.270 Gigs) of RAM to PS CS3 Extended. Everything works well until I use the new "Quick Selection Tool (W)." Whenever I use it, I get the message, "Could not complete your request because there is not enough memory (RAM)." The "Magic Wand" and all the other tools work great.
This happens regardless of what else is happening on the computer. Usually only PS and PS Bridge are the only apps open. And it doesn't matter how many images are open. I'm running Windows XP.
I am using CS and just recently ran into an error that is starting to frustrate me. I just upgraded from a P4 2.4 with 512mb of RDRAM to a P4 3.4 with 1024mb of DDR2 SDRAM. I never had this problem before, but I'm trying to filter>distort and I keep running into "not enough sufficient ram" errors. i closed all my other running programs and tried again. same error. so, i restarted the computer and ran PS again only to have the same problem. The picture is 8.5x11 at 500dpi. I increased the memory allowance from 50% to 70% and added more space for the scratch disc and still nothing. Whats going on? Isnt 1GB ram enough or do I need more?
View 9 Replies View Relatedi'm using photoshop CS, when i try pasting an image from other apps like macromedia fireworks, i will receive an error, not enough memory (RAM) . however, i have more than 200MB of free memory stated in my task manager. I find this very weird, i have check other setttings in photoshop, they're in default settings. i have tried to allocate more memory to photoshop, but nothing work!
View 1 Replies View RelatedI was working and rendering in the program and it was working just fine, then just today i was rendering and i got "out of memory error" and it stopped working and just closed. I restarted the program and when i selected an object it just stopped working again and i got the out of memory error again. I have about 200 GB free space so i don't know whats wrong, I'm running Windows 7 32bit.
View 7 Replies View RelatedHow is it possible for Mental Ray to give me an out of memory error on a Windows 7 professional 64-bit machine using the 64-bit Max Design? I have 4GB of physical memory, but whenever a program needs more memory Windows allocates virtual memory to it, so theoretically my memory limit should be my hard drive space. However, when I try to render my scene with a little less than 200k polys with a displacement map on it (trying to get grass), the task manager shows 3dsmax.exe using up to 4.3GB of commit memory (4gb working memory), then it crashes.
I've set Windows to use up to 16gb for my pagefile, so it seems like mental ray isn't actually 64-bit since it crashes right at the 4gb limit of a 32-bit program.
EB42
Win7 64bit
4GB ram
500gb 10k rpm hdd
Infrastructure Design Suite Premium 2014
Civil 3D 2014 x64
Windows 7 64-bit
6GB RAM
Giving me 'insufficient memory was available to complete the operation' when trying to place and image (jpg ~23mb) inside a .ai file which is just a few KB large.
Laptop has 6GB physical RAM and 1GB virtual RAM.
Having problems while allocating memory blocks bigger than 100-200mb within a plugin?
When we try to allocate blocks of around 300-400mb running as a illustrator cs5 plugin every method we tried have failed (sAIBlock->AllocateBlock, malloc, new char, and even HeapCreate/HeapAlloc). We can allocate a block about 100-200mb, but no more.
Using the same compiler, from a standalone application we were able to allocate blocks between 1 and 2gb without problems.
Our test system is 32-bits and has more than 3gb ram available.
I installed Photoshop CS6 64-bit on Windows 7 SP1 64-bit.When it starts, these two messages are displayed: Unable to open a virtual memory file because the file is locked. You do not have permission or the file is being used by another program.
Unable to initialize Photoshop because the file is locked. You do not have permission or the file is being used by another program.
i have downloaded the trial version to test ps.when i click save it exits Photoshop..and after about 15 minutes a error comes up and it says "memory could not read"
View 5 Replies View RelatedI am Using Adobe Photoshop CS3 Version 10.0 and I keep getting the error "Not enough Scratch memory available to perform this action" whenever I try to Save a .psd file to a .jpg/.jpeg file.
I did go to Edit -> Preferences -> Performance, and add my other two partitions as scratch disks, also put up my E: drive as the primary scratch disk on the top of the list (Which has 80GB's of space) but I still keep getting this error.
My file (the .psd that i am trying to save to a .jpg) has a total size of 56MB and 300dpi with 4 or 5 layers in it and the target jpg file is supposed to be 12inches by 20inches.
Some other things I have tried is celaring the %temp% folder, Defragmenting my Hard Drive(s), Disk Cleanup, set my System Page file to 4GB, but all this is of no use.I know that I have enough RAM and Hard disk space.
does the type of RAM and Processor you are using effect this? I have a DDR RAM.. 2GB, I know its outdated, its our office computer I am working on.. My Processor is a Core 2 Duo which isnt bad.
i had CS3 running fine for as long as i can remember.. (on winxp pro sp3 32bit)
then all of a sudden today when i try to start it.. it opens and the splash screen comes up, then when it gets to 'initializing palettes' i get an error that says etc etc memory cannot be read...
i uninstalled, ran the cleaner, deleted all cs3 folders in docs&settings.. reinstalled.. same problem ...
I have an HP Pavilion 730. I have purchased the upgrade to CS4 and it has been working for a while. Now all of a sudden, when I open the program, the computer goes "boink" and a message comes up that says:
The instruction at "Ox77e78804" referenced memory at "0x0at1a1470". The memory could not be written. Click OK to terminate or click cancel to debug program.
No matter which one I do, it shuts down CS4 totally?
I have uninstalled the program and reinstalled it and it still does the same thing.
I previously used PS CS on XP Pro and all was fine. I then upgraded to Vista. Since I reverted back to XP Pro I keep getting error messages.
When I use the 'Open as' command, I get:
"Could not complete your request because it is not a valid Photoshop document" (yet it's a JPG) - works ok if I just usen File >Open.
When I try and shut/close down the file/program, I get:
"Could not complete the Close command becuase there is not enough memory (RAM)"
Strangley enought these messages then just disappear. Really stuggling to use this software due to the annoying pop up messages.
Could not complete this operation. There is not enough scratch memory available.when trying to save for web. The content has a lot of linked images, around 1000x1000 px each, used with clipping masks, drop shadows and glows at 300dpi.I realize that this might be hard to flatten for JPEG and I'd be fine with long processing times (which I get) but out of memory?.
Those are all gigabytes, not megabytes, no mistake. There's NO WAY that there's not enough scratch memory available.And this is how the process looks; Physical memory usage at this point is 62%, Commit charge - 15%.
Currently, I can work around this by making a screenshot of "Original" tab in Save for Web dialogue when it's there - because sometimes it's just a pink-filled window.
I just got the attached error message when trying to exit a sketch that I was editing. Windows says I have 11Gb available so there must be a problem with Inventor. I am now stuck with no way to edit the sketch without getting this error. It's a part that was migrated from 2011 format using task scheduler. Using 2012 SP2
View 1 Replies View RelatedWhile working on a complex project with PSCS4 that involved copying and pasting from numerous open documents, I have been receiving an error message shown in the link. PS then shuts down with loss of my data.
I'm running Windows XP Pro with a dual Xeon processor workstation with 2GB of error correcting memory. PS3 and other applications have been working properly.
Any suggestions other than going back to PS3?
I recently installed CS4 and when I quit Photoshop CS4 I get a "DDE Server... memory could not be 'read'" error. I've looked all over the forums for solutions to this, tried deleting my preferences file, reinstalling CS4, and fiddling with performance options, but nothing seems to make a change. I never had much trouble with CS2 or CS3.
View 9 Replies View RelatedWe have Photoshop CS2 running on Windows XP SP2 machine with 3 GB memory. Whenever we try to open illustrator CS3 file in Photoshop get following error message:
"Could not complete your request because there is not enough memory(RAM)".
We used to be able to do this without any problems untill I upgraded the memory from 2 GB to 3 GB. Dell technician came and changed the memory chips on the PC still get the same message. I went into performance monitor and not much memory is in use when this error comes up. Tried opening just one application at a time too.
Is there any patch that I need to install on the PC.
I am having a problem opening some larger revit models (100MB plus) in revit 2012 I will receive a message saying:
Insufficient memory for load. This computer does not have enough memory to open 'file name' in autodesk revit architecture 2012. Increase the available memory or contact Autodesk support for more information.
We are working on Windows XP SP3 with 3.23gb RAM. Now normally it would be as simple as upgrading the RAM on this machine to 4GB as specified in the system requirements for 2012, but a previous computer I was testing with only 2GB RAM was able to open these files without any issues (despite being a little slower).
The only difference I can see at this stage is the 3GB switch is enables in the 2gb machine.