Illustrator SDK :: How To Allocate Blocks Of Around 300 - 400mb

Mar 12, 2013

Having problems while allocating memory blocks bigger than 100-200mb within a plugin?
 
When we try to allocate blocks of around 300-400mb running as a illustrator cs5 plugin every method we tried have failed (sAIBlock->AllocateBlock, malloc, new char, and even HeapCreate/HeapAlloc). We can allocate a block about 100-200mb, but no more.
 
Using the same compiler, from a standalone application we were able to allocate blocks between 1 and 2gb without problems.
 
Our test system is 32-bits and has more than 3gb ram available.

View 1 Replies


ADVERTISEMENT

Photoshop :: Not Able To Allocate All Vram?

Jan 20, 2013

I have a Nvidia GeForce 570 GTX, and I just did a clean install of the lastest driver. For some reason I only have a total of 1,251 VRAM to allocate in photoshop CS6 3D preferences. Using 3D with only 1,250 vram is pretty choppy, and if i'm not mistaken the 570 should have atleast twice as much VRAM available.
 
NOTE: Everything outside of 3D runs great.

View 2 Replies View Related

After Effects :: Unable To Allocate Memory Error

Mar 4, 2013

I have to look at a PC tomorrow that has either CS5 or CS5.5, it's running Windows 7 64 bit with 16 GB of Ram.
 
The error being given is: "Unable to allocate 0.000Mb of memory. Either decrease the memory requirements for the rendering of this frame or install more RAM. (123803/U.Mem Tracked Object)"

View 8 Replies View Related

After Effects :: Unable To Allocate Enough Memory To Render Current Frame

Mar 2, 2014

I bought this AE file  URL...Here is the error message I get when trying to render...After Effects error: Unable to allocate enough memory to render the current frame (18172 x 18172 @ 8 bpc). Either decrease the memory requirements for the rendering of this frame, or install more RAM. (12805). For more information, see adobe.com/learn_ae_mem (7 :: 66)
 
I even tried to render the project without making any changes. No luck
 
Is my laptop inadequate for this type of work?When it says - (18172 x 18172 @ 8 bpc) is that the resolution it's trying to output? The project is 6 seconds long and 1920x1080 resolution. I can render it at half resolution, but not at the 1080 res.

View 2 Replies View Related

Illustrator :: Create Alphabet Blocks In CS6?

Jun 18, 2012

I have looked everywhere on the net for a decent instruction on how to create alphabet Blocks in illustrator. I have version CS6. I have found a few but none works well. I want the blocks to be 3d and to have a wooden grain look to the block.

View 3 Replies View Related

Illustrator :: Export To DWG - Some Layers Are Not Exported / Some Appear As Blocks

Nov 12, 2012

I was trying to export a dwg file from Illustrator CS5 in order to edit the drawing in AutoCAD and keep the layer structure. Unfortunatly it results in a bunch of mistakes... some layers are not exported, some layers appear in AutoCAD as blocks.

View 1 Replies View Related

Illustrator :: Blocks Appears Behind Text When Converting To Outlines?

Dec 13, 2012

Why do blocks appears behind text when converting to outlines? This only effects some text, even though the font and character attributes are the same.

View 6 Replies View Related

AutoCad :: Enable User To Export Blocks As A Symbol In Illustrator?

Sep 10, 2012

Any script or trick that enables a user to export autocad blocks as a symbol in illustrator?. this would save a great deal of copy paste time. if one changes a symbol say a set of dining tables in illustrator all its instances would change accordingly!!

View 0 Replies View Related

AutoCAD Visual LISP / AutoLISP :: Select All Blocks Like Selected Blocks With Window?

Feb 28, 2011

(defun CELBLKS ( / e blk ss blkl)
 (setq blkl ""  ss (ssadd))
 (while (setq e (entsel "

[Code]....

i have this lsp, it works great but how can modify it if i want select with a window.? exemple: if i have 3 differentes blocks, i want to select them with windows and the lisp select all blocks that are identical of those 3.?

View 9 Replies View Related

AutoCAD Dynamic Blocks :: Zoom All & Extents With Blocks Containing Fields On Layout Tabs

Aug 22, 2013

We have a new title block which now contains various fields to automatically populate the drawing number, number of sheets, issue etc.  The problem we have is when we go to zoom all or extents on a layout tab it moves the layout to the right each time.  If we only have one layout or we use a plain title block i.e. with no fields, the zoom works fine (layout stays put in the center).  This is also true if we directly insert a field onto the layout - again no problems. 

The cause of the problem only happens when a block containing a field is inserted onto the paper space of a layout and,there are multiple layouts containing blocks with fields.

View 6 Replies View Related

AutoCAD Dynamic Blocks :: Finding Number Of Times Specific Blocks Used In A Drawing?

Aug 8, 2013

How to find no of times specific blocks used in a drawing?

View 9 Replies View Related

AutoCAD Dynamic Blocks :: Stretching Same Parameter In All Blocks In Drawing From One Field?

Jul 15, 2011

How do I manipulate a height parameter all of the dynamic blocks in the drawing from one single field? Say a field located in the drawing properties or on the drawing itself.

For example:  Multiple blocks of different walls of same height with other blocks of things on located on those walls, dependant on the wall height, all linked to and changed by a single field. Possibly a Wall Height field located in the custom tab of the drawing properties.

I can pickout each of the blocks and change them at the same time in properites menu because they all share the same parameter name.  I would just like to have that height parameter of every block in the drawing, that has that specific parameter controled by a single field.  Which I could enter a new height at anytime that would change every block in the drawing to that height.

View 1 Replies View Related

AutoCad 2D :: Replace Dynamic Blocks With Normal Blocks Based On Parameters

Aug 2, 2012

We used a bespoke program to convert our drawings to Java applets for web usage. This does not cope with dynamic blocks at present and we have started to receive drawings from our clients using them.

I need to replace this with standard static blocks based on one of two criteria. Either:

1) Replace based on visibility state (have generic chair block with multiple different chair types set by visibility type, need to replace depending on which type it is set as)

2) Replace based on parameter (have table with size set by dimensions, need to replace with static block for each dimension)

View 0 Replies View Related

AutoCAD Dynamic Blocks :: Add Exact Same Objects And Visibility State To Blocks

Jan 7, 2014

I have over 100 blocks that I need to add the exact same objects and visibility state to.  Is there a way to globally make this change, or even to copy the visibility states from one block to the next without having to recreate the states in each block?  I thought I had previously run across a routine on here that would make changes to multiple blocks at once, but I can't seem to find it now.  

View 1 Replies View Related

AutoCAD Visual LISP / AutoLISP :: Convert The Blocks In Dwg File To Lines That Are Centered On Those Blocks?

Jan 24, 2012

I have a project in 3D that I would like to export to Stadd.  This requires lines rather than blocks.  Is is possible to convert the blocks in the attached dwg file to to lines that are centered on those blocks?

View 9 Replies View Related

AutoCAD Dynamic Blocks :: AttSync Of Blocks - Takes A Long Time With Numerous Objects

May 18, 2012

The AttSync command does what it advertises fairly well.  My problem is that I have thousands of small blocks in a single drawing.  (My current drawing has 2100 block references with four attributes in each one.)  I may change the attribute values in a few of them and need to re-sync the attribute locations.  When I run AttSync it updates every single block insertion.  One of two things are desired:

1)Flag each block insertion as having been sync'ed, reducing the number of objects requiring synchronization when AttSync is called again.  Provide a way to force all to be sync'ed.

2)Allow a selection set in the AttSync command after selecting the block to sync.

Either or both of these would a great time-saver for those of us with large numbers of blocks with attributes.

View 1 Replies View Related

AutoCAD Dynamic Blocks :: Exploding Blocks With Negative Values?

Apr 24, 2013

I built a building foundation for a grading plan and I have another building that is the exact mirror of it. I have tried to mirror it. Didn't work. I created a block of the feature lines and inserted it with a -1 x value but I can't explode it. I tried the regular explode and xplode. Neither worked. I can use the the block to draw feature lines over but it just seems so much easier if I could figure out how to explode the block.

C3D 2013

View 2 Replies View Related

AutoCAD Dynamic Blocks :: Delete Last Attribute In All Of Specific Blocks

Jan 24, 2012

I have the same block repeated multiple times in a drawing, and I want to delete the last attribute in all of the specific blocks.  When I edit the block in block editor, the attributes do not show up.  After I explode the block, there is no text.  The attached image shows the properties of the block.

View 9 Replies View Related

AutoCAD Dynamic Blocks :: How To Get Blocks To Have Images Associated With Actual Block Name

Apr 29, 2013

I am using AutoCAD 2013 on Windows 7 platform

95% of the blocks on the palettes have the images associated, and named, per the block name.

I have 48 blocks that the images are named like this "Block tool_F2149212-4649-41F5-95E6-4A978EC376F5_2".

I have tried resaving the blocks and recreating the blocks to no avail.

How to get these few blocks to have images that are associated with the actual block name and not the generic "block_too" name?

View 4 Replies View Related

AutoCAD LT :: Fields Within Blocks / Update Blocks For A Client

Dec 4, 2013

I am trying to update blocks for a client.  Each block has a line of text with the block name in it.  I would like to automate these with a field so that if the block name changes or a new block is created from that one, then the field would update as well.  I am running AutoCAD LT 2012 currently.

View 8 Replies View Related

AutoCAD Dynamic Blocks :: Sharing Parameters Between Blocks

Nov 20, 2013

I wish to have a single dimension alter the dimensions in a set of nested blocks, similar to shared parameters in Revit. For example, I have a circle that has a fixed diameter that I wish to control in all blocks.  I have set the diameter to barDia so now I wish to manipulate the dimension from outside the block.

Am I able to share the parameter across all the blocks?

View 1 Replies View Related

AutoCAD Dynamic Blocks :: Replace Standard Blocks

Jun 20, 2012

I was trying to alter the standard blocks on the tool palette. How I messed everything up but I basically have two huge problems now.

1. I am missing the necessary default blocks that should be under my edit block directory.....all the Aecb files.
2. Now when I try and put in a receptacle or any other standard block a triangle with an exclamation point shows up upon insertion.

I attached a picture of the "edit block definition" and the troubled symbols.

View 1 Replies View Related

AutoCAD 2013 :: Unnamed Blocks Inside Blocks

Feb 19, 2013

I received a file that has a large number of blocks with unnamed blocks inside. I need them all to be by layer, and i really don't want to explode it.

How can I can do it?

View 6 Replies View Related

AutoCAD Dynamic Blocks :: Text Disappeared From Blocks

Oct 1, 2011

I have been working on a drawing with 3 different dynamic blocks for several weeks and everything has been working perfectly.  However, all of a sudden this afternoon, the text in all 3 dynamic blocks disappeared and will not display on the screen in paper or model space, and does not print.

As best I recall, I was creating a polyline viewport when this text disappeared.

I cannot turn the text on in these dynamic blocks.  The text in on layer 0 which is on, and is unlocked and unfrozen.  Additionally I have turned on, unlocked and unfroze all layers in the dwg and this does not work.  I have also checked the text layer in the block editor and it is on layer 0.  

When I click on any of the blocks, all the information appears to be correct, ie: door numbers, text style, etc.  The text, however, just does not appear.  Also I have never set any invisible text parameters and when I open the block editor, nothing in the invisible text area is selected or select-able.  

Previous versions of this drawing, which I saved yesterday, display all block text perfectly. Perhaps there is a setting I accidentally hit which caused this problem?  

I have tried repeatedly turning on all the layers, unfreezing, unlocking, changing parameters in the Style menu.  I closed Autocad and turned the computer completely off and back on again.

View 1 Replies View Related

AutoCad :: Separate Same Type Of Blocks In Dynamic Blocks?

Dec 12, 2013

how can i separate same type of blocks in dynamic blocks? all layers are same..

View 9 Replies View Related

AutoCAD .NET :: Plots All Blocks To PNG - Open DWG / Get List Of All Blocks

Nov 30, 2012

I have a program that plots all blocks to png - open a dwg, get a list of all blocks, insert each into an empty dwg, zoom extents, and plot using the OOTB PublishToWeb PNG.pc3.  In the attachments is an example of the problem.  When I do this manually from a layout, I get the correct image.  When I plot from code using the same PC3 file, draworder is being ignored.  

It works if I apply transparency to the block and use ps.PlotTransparency = True, but I would prefer not to have to tell the user to change the block definitions.  Is there a plotsettings property I am missing?

View 1 Replies View Related

AutoCAD Dynamic Blocks :: Text In Blocks

Oct 4, 2012

I want to create some symbols which includes text.  For example, I have a square with an "F" centered within the square.  The problem I am having is when I insert the block into a drawing and rotate it, the "F" also rotates.  Is there any way to make it so the "F" is always horizontal no matter how I rotate the block?

View 2 Replies View Related

AutoCAD Dynamic Blocks :: Annotative Blocks

Aug 17, 2012

I've just started to learn how to use Annotative Blocks and i'm running into what is probably a very simple problem.  I'm creating a block and want to assign annotative scales to it.  Once created, I insert the block into the drawing I need to use it in, and the only scale that shows up is the scale that is active when inserted.  

All the other scales I added when creating the block are gone and I then have to assign the scales to the block again.   I would prefer not to have to manually assign the scales every time the block in inserted into a drawing.  

View 4 Replies View Related

AutoCAD Dynamic Blocks :: Changes Persist To All Blocks

Aug 8, 2012

when I modify a dynamic block, that change persists to all other dynamic block that I have in the drawing. For instance, when I stretch the tail of a section callout, every other section callout stretches as well, which is quite inconvenient as you can imagine. I need each individual blocks changes to be independent of the others.

View 8 Replies View Related

AutoCAD Dynamic Blocks :: Annotative Parameters Inside Dynamic Blocks

May 5, 2010

I've made annotative blocks and I've made dynamic blocks... My intent is to integrate both but I can't find a way to move dynamic block parameters separately at different annotative scales.

In other words, if I insert an annotative dimension and add multiple scales I can move the dimension grips independently at each scale. If I insert a dynamic block I want to be able to use the dynamic block's action "grips" to do the same. However, with a dynamic block, if I move a stretch action at one annotation scale it moves the action at all annotation scales.

The attached file shows a simple example.

View 2 Replies View Related

AutoCad :: Scale Up 100+ Blocks At Once And Have Each Base Point As Blocks Insert Point?

Jan 25, 2013

Can I scale up a 100+ blocks at once and have each base point as the blocks insert point?

View 9 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved