How can I blend the changes in source text changes? At the beginning of the movie the text is large and red and at a later moment the text moves position and changes to a smaller white text (this part I have fine but the change is drastic from one frame to the next and I'd like to blend that change...??
View 4 RepliesI would like to create an image like the one attached. It has very nice effects including the blending and an added shade of purple to some parts of the image. Anybody knows how I can achieve this in FIREWORKS please?
View 2 Replies View Related1) how to import editable(or live) gradient meshes into After Effects or any other software?,(blend objects now import!)
2) How to Blend between gradient meshes?
I have an old man whose eyes are slitty and so I have created a white with a layer and feathered it round his wrinkles and it looks ok. I can add mask track to this in ae and also track it in mocha. I have an iris import clip that I then need to add to the white. It is in .png.
I cannot make a mask path appear on the layer information to the left of the screen so the iris dances about and can't be tracked.
How do I blend the white mask layer and the iris layer so they move as one? Do I put them together then track them togethr in mocha?
I have spent a day on this trying to figure it. On top of that I would also like to clone an eyelid half open so that I can put this on top of white layer, iris layer and then eyelid and track all together. But if possible the white and iris moving together would be enough.
In the instructions on youtube I have also found that when I hit 3d little cube icon I get a black background on the iris and not the old mans face how do I get rid of that?
This is for a man who gets wolf eyes in the film. Would it be easier to get some wolf eyes in photoshop and stick those on? the clip is just 4 secs long.
im having trouble getting the fillet edge command to work. Ive never had a problem with it before but now i get <Modeling Operation Error:
geometry or topology at end of blend too complex Failed to perform blend.Failure while filleting.>
why its not working.
When using the blend tool to blend colour between two objects is there a way to see the anchor points so I know where to click the blend tool. I realise the cursor changes when over one but its seems very cumbersome to have to move it around until it changes rather than click directly on one which I could do if I could see it.
View 2 Replies View RelatedI'm using Illustrator CC (on a Win7 Pro machine) at a beginner level, probably halfway to intermediate. I'm trying to learn how to blend colors together for highlights of various types (skin tones, clothing, light on objects, etc.) so that when I'm making a graphic for a project I'll have a decent idea of which tool/technique is best for the specific effect I need.
I'm trying to use the Smooth Color option in the blend tool. Late yesterday afternoon I recall creating two ellipses (one of which was a solid fill and one of which was a gradient going from black to transparent) and getting a smooth color transition between the two. It was a much harsher effect than I was looking for so I didn't keep it. This morning, while trying to replicate the same thing, I seem to be unable to use smooth color between two objects if one or more of them has a gradient applied. I only get what you see below, which is a step between the two objects.
I've done searches and found multiple references to blending gradients in this way and have followed those instructions (create the shapes, fill with the gradients, then either click on the Blend tool and click on the center of each shape, or click on Object -> Blend -> Make) but I can't seem to get a Smooth Color blend if either object has a gradient applied. Am I missing an important step somewhere? I'm 95% sure I accomplished it yesterday and nothing has been changed since then.
I have a series of colored rectangles I'd like to blend into a single rectangle with a smooth blend of the colors, like a rainbow or spectrum.
View 1 Replies View RelatedShapes and text are anti-aliased visibly better with the blending settings in the Advanced Controls section of the Color Settings set as follows: Just as an example, consider the appearance of the edges of this text and circular shape layer in an sRGB document with those settings set vs. cleared:
The difference is subtle, but significant in my opinion, marking the difference between okay quality and good quality. You can see the difference in the partial pixel shading at the curved edges in this enlargement of a portion of the above:
Is there any reason I wouldn't want to just set the above values and use them all the time? I fully understand the concepts of gamma and pixel blending (and I think it's great that Photoshop has this feature), but I ask this question here because there may be subtleties of how Photoshop uses these settings I'm not aware of, and notably they are NOT set this way by default with Photoshop CS6.
Im using the blend effect with text in 2.8, but after editing and seeing the actual playback it appears too fast. My question is there anyway to slow this effect down?
View 4 Replies View RelatedI am trying to blend two different art brushes with different colors using the blend tool. I'm trying to use two fixed-size line segments of the same length and then applying the two different brushes to those segments ( each art brush is a different color). Then I want to blend them the regular way so their colors transition. However, when I do this, the first shape is a different color, but all subsequent blend steps are the color of the second blended shape. Why is this? It doesn't blend the colors for some reason.
View 4 Replies View RelatedI want to create an image like this:
[URL].............
I created text, 2 characters on first line, and then 3 characters on second line. I changed the vertical spacing, so that the characters are overlapping a little. But when I change the blending options for the layer style, I can't get it to look like the link above. I don't want to seperate each character into its own layer.
I've made a fabulous Smoke Text effect that I then insert the .mov file into Final Cut Pro. The smoke effect I downloaded from the tutorial has a black background and therefore when rendered out, it's a basic white text against a black background. Once in FCP, I have to turn the file's opacity down in order for it to layer over a video file and not black out what I layer over it.
How can I make the file transparent? A simple toggle of the transparency grid isn't going to do it. I need to make or find a video of smoke that is transparent?
I have text in a frame with a table in it, connected to a Word file. Every time I try to copy text in it, InDesign goes into a loop while it refers back to the original file. It does it a bunch of times, I assume (but don't know) once for every row in the table. The loop takes three or four minutes to complete and there's nothing I can do until it's finished... I want to break that link and just have it as a normal text box, rather than a placed one. How do I do that?
View 3 Replies View RelatedI have a circle which is blended.
In the circle is some text, rounded - not circle text, it is placed on top rather than typed in the circle directly.
I need to edit the text and it won't let me select it! No matter how far I zoom in to make sure I'm clicking the text, the circle gets selected and the blend tool opens.
They are not grouped or anything. This has happened before many times and with much persistance I get there eventually - but is there a much faster way?
I have "group1" and inside that group, only one layer: "layer1". The blending mode for "group1" is vivid light and for "layer1" it's "normal".
Now, if I change "group1" to "pass through" and "layer1" to "vivid light" ... the result is completely different, while it should be the same, shouldn't it?
I have a 3images with a common background, but there's different text and each picture has a different part of the background intact. I'm looking for a way to restore the back ground by over layer the images together. I originally tried with one image and selecting the text with the magic wand and filling it with content aware fill. But the results were so so.
So I have a few questions;
1) the images have slightly different orientation. I can't get them to perfectly align, its weird, I really can't do it. I can get it close, but not perfect, is there a simple way ?
2) How do I keep the common element between the images (the background) and remove what's different (the text) ?
I tried overlaying them after having deleted the text, but I still get the damn contour effect.
3) Furthermore, the colors are slightly different between the images, is there a simple way to get them to match ?
When I select "Object Properties" as the source for the callout text, it always includes the field name. For instance, I select Field A and Field B as active fields in the Object Data Manager and enter "x" and "y" respectively, as the fields' value. The callout then produces the text "Field A = x" and "Field B = y". I only want to display the field's value (i.e., x and y). I don't want or need the "Field A =" or "Field B" = " displayed.
View 3 Replies View RelatedIt is possible to create a sort of news ticker and displaying an external text source, can i load this one: [URL].... in my composition?
View 2 Replies View RelatedI’m trying to add some text effects over my video, but I’m really stuck right now getting After Effects and Adobe Premier to work together.
From the tutorials I’ve watched online, I’ve been trying to create a dynamic link between the two programs so I could easily create texts and other effects in AE that immediately show up on my timeline in Premier. I've been able to create texts, but whatever I create in AE is not showing up on the Premier timeline. Am I missing a step? Also, when I load up my sequence into AE, all of the color correcting that I’ve done with Looks inside Premier goes away, and the clips appear as they did right out of the camera.
I need to copy a layer from one drawing to another, the problem is that one of them is in model and the other one is in paper. The method I tried using was: I used the q select command to copy all objects from one layer on to the clipboard and then tried pasting it in the other drawing (which was in paper) - and nothing got pasted.
View 3 Replies View RelatedI think I may have made a big error. While adding text and applying (experimenting) various "Effects" with the text, I used the garbage can icon to remove the "Effect", thinking it is going to remove the 'Effect" from the text, until I realized I had to remove the "Effect" with the edit button, not the garbage can. Have I now permanently removed the various "Effects" permanently or just off the screen? How do I regain them back onto the menu column? How many "Effects" should be visible in order to have the complete set? This was my first experiment with the lettering effects and hope I haven't lost them forever.
View 3 Replies View RelatedI use After Effects CC and am having trouble with the 3D camera tracker. Here is a link to the video where you can see my problem.URL....
The video works fine, until at the end, when the camera moves through the text. When it moves through the text, it starts to "shake" the text. When the camera moves back away from the text, it stops shaking again.
I have downloaded a few lower thirds from a website and they download as .mov files.
I am trying to add text to them and lay them over some product spotlight videos for my work.
I was thinking that they were going to be in template form but they are not.
What is the best way to add text to these .mov lower third files?
I just have to create my own animation for the text to follow along the lower third?
Loving all the features there in ,so many to look and learn I was playing around in after effects last night, and i got stuck when it came to mixing two different videos as one, i found and played around with the effects settings but when i went to put some text in i had no idea where i was i got lost then confused and ended up just closing the program without saving anything.
View 4 Replies View Relatedhow do i make text look like chrome ....
View 4 Replies View RelatedI was just into computer graphics couple weeks ago. I would like to know if it is possible to do a rusted steel and anodized aluminum metallic type text effect?
View 3 Replies View RelatedAttached is a nice text effects. Can anyone tell me how they do it (all three texts).
And what font type is "studies"?
Photoshop CS. I am using it to print out my wedding invitations and am having a problem.
I printed out a majority of them a few months back and used the font 'poor richard' with the effect 'glowing edges' and it worked perfectly for the look I was going for. Now, when I try the same, the color of the text changes to black as soon as I apply the effect.
I used XPGD7 to do some simple text w/ shadow and added it to my website (as an h1 tagged page heading). I do not pretend to be a graphic designer and would like a designers eye to tell me how to spice it up. Perhaps emboss or engrave? How can this be accomplished?
May I add the url of where it's posted so you can see it on the website (site not built w/ Xara).
A while ago I found a really easy way to make text effects - like fire text etc. It was from a drop down menu and was something like "create logo".
View 9 Replies View Related