3ds Max :: Way To Connect Dice Result With Potential Program In Java
Jul 22, 2012
I am trying to combine graphics with source code in java that is why I started using 3ds max. I created 2 dices that fall on a floor(I want to create a board game which uses dices in order for players to move).I now want to do the following:
1)Improve the dices scene in order to fall in random ways each time so that every time the result is random
2)Is there any way to "connect" the dice result with my potential program in java? That is, can the program detect what the dices showed and transfer that result into the game(move the player).Of course the implementation of the source code would be very easy given that the results of the dices are known, but I want to know if there is any way to get these from the above animated creation.
View 1 Replies
ADVERTISEMENT
Sep 1, 2013
When trying to run Photoshop CS 5 I get an error message (stopping launch) saying I need to install Java SE 6, however Java SE 6 is no longer supported by Apple for security reasons. I have Java SE 7 (Oracle) installed but Photoshop seems to be unaware.
I have spent a few hours searching for how this can be fixed in a way that does not involve installing an old unsupported version of Java (i.e. SE 6) over the top or in place of the latest version of Java (i.e. SE 7).
I see many people have the same problem, but there appears to be no clear answer from Adobe staff.
So big waste of time.
The more difficult the update process is, the less often people will update their products, ultimately this will impact on Adobe's bottom line.
View 9 Replies
View Related
Oct 5, 2003
I need a way to take images of a preset size and slice them up into seperate little image squares which are each saved with a sequential number starting with the first square (top left) but in a grid type pattern - so the first square would be saved as '1-1.jpg' and the one to the right of it would be '1-2.jpg' and the one to the right of that would be '1-3.jpg' etc. Then the next row would be like '2-1.jpg', '2-2.jpg', 2-3.jpg' etc. and so on.
Is there anyone who would possibly be able to help write an action to do this automatically?
I know it's a large request but I'm not so good with complex actions and don't know where to begin with this.
Please help if you can. The final 'diced' images are to be used in a website which is a college project of mine, I'm fine with building the website, I'm just not so good with actions and really don't want to have to slice a number images individually (I'm currently estimating there will be a large number of little squares per image - something in the region 300 or so...). If anyone can help I'll work out the exact figures and dimensions so it can be done.
View 5 Replies
View Related
Feb 10, 2013
I have been using Auto-Analyzer for many years [close to 16,000] mostly with images taken with the Nikon D80 DX Format JPEG's. I recently started using the Nikon D800 FX Format JPEG's and the Auto-Analyzer just skips all the FX Images and I get an error message that these images cannot be analyzed because of potential errors. They all have thumbnails and can be edited - I would just like to use this feature to detect blur and advise on light/dark issues.
View 14 Replies
View Related
Jul 26, 2013
Trying to apply the oil paint filter to a 45" x 30", 300dpi, 16-bit image I an error dialog that says: "The filter you were using encountered an unknown graphics processor error that caused an unexpected exit. Check the manufacturer's website for the latest software."
The menus all become gray and the software freezes so I can't quit, but Force Quit does not show "not responding".
View 5 Replies
View Related
Aug 27, 2011
How do I put templates on an online website for viewing by potential clients.
View 3 Replies
View Related
Feb 15, 2012
i have been a long user of romcat... but would like to use the new corel connect. i use the folders selected to my HD folder that has all my cdr files (20yrs worth from ver 1). when i type in a search word that is in 100's of my cdr files keywords... connect doesnt display them. In romcat it does display them, even older files, with the same key word. connect only shows cdr files that have in its file name part of the search word, but seems to ignore the key words in the files.
I have all my job files with important key words within them, but the actual file names are simple job numbered names. i noticed on searches from X5 content on dvd, the files also are just numbers, but the search finds key words.
View 2 Replies
View Related
Jan 30, 2013
How can I run Illustrator without Java? Is there a Java-dependent plugin I can turn off, a resource I can delete, or some way to coax it into performing the function I bought it to perform?
(I will not be installing Java on my machines. I wish Adobe had told me that the software I bought was reliant on obsolete middleware.)
View 4 Replies
View Related
Jun 2, 2012
why is my fresh install of Photoshop CS6 requiring Java?
What does PS need this for? Is there any way to install without Java?
I'm running a fresh install of Lion on a MBP. Installed Design premium CS6 as a digital download.
View 4 Replies
View Related
May 31, 2012
Does Gimp offer an interface (dll) which will allow me to access it capabilities through java or c++?
View 7 Replies
View Related
Feb 16, 2012
I want to write a Java program that mimics the plasma filter. However, my first few (as in 30-40) attempts have not been very successful. If GIMP provides algorithms or source code for the filters anywhere?
View 1 Replies
View Related
Feb 11, 2013
I am designing a very simple game, based on the game of Battleships, and to begin the build I'll be needing a grid of (approx) 30-50 squares, which will then form the (online) board of the game - how can I go about this?
View 17 Replies
View Related
Jul 26, 2012
We are developing an application using functionality of Gimp´s channel mixer with java.
Our problem is that we don’t Know how channel mix works exactly for transforming pixel by pixel in Java.
For example,
We have an image an do on it the next mix:
Output Channel = Red
Red=200.0
Green=0.0
Blue=0.0
For simulate that, we transform all pixels with Red Component *2 and 255 (maximum) if is greater.
Our problem is:
Output Channel = Red
Red=200.0
Green=60.0
Blue=0.0
How can I simulate that?
View 1 Replies
View Related
Dec 2, 2012
I cannot share photos from my Elements 8.0 Organizer via email. The program does not recognize that I have an email program loaded. The computer is a new HP desktop with Windows 7 Home Premium Service Pack 1 operating system. My Elements 8 does everything I need except for the photo sharing so I don't really want to purchase a new version.
View 1 Replies
View Related
Jul 31, 2011
When I'm gonna write my program stops and appears a box that says Run time error and close my program. What is that, what I coul do?
View 1 Replies
View Related
Aug 9, 2007
I really like how this picture came out and I was wondering how I could get a similar aspect?
I know you can play with curves, levels, and saturation but I'm sure its more then that ..
View 3 Replies
View Related
May 22, 2011
Just loaded my high decimated zbrush model into 3dsmax 2012 for baking. 4,538056 polys in one go from GoZ.
17 x 2048 tex tiff maps applied and still running. The realistic mode is on and nitrous is running. I cant believe the quality I am seeing in the viewport. Phew, incredible.
View 2 Replies
View Related
May 20, 2013
After working on a complex, multi-layer image, if I save the result as PSD and not as XCF, will I lose anything when I return to the file later?
View 3 Replies
View Related
Sep 27, 2012
New to Lightroom.
I have imported my existing folder structure to catalog.
My current folder names contain when, where, what & who information. I created a couple of smart collections, but all I get are images. How do I get a result set of folders? Easy example is 'wedding'. I need a list of WEDDING EVENTS, not 20,000+ wedding images that have no meaning when shown together. I assume this must be easy, but have already spent way too long trying to figure out how!
View 7 Replies
View Related
Jun 12, 2012
I have 4 panels up on the screen and I want to end up with a jpg that has all four panels. How do I do that?
View 3 Replies
View Related
Nov 2, 2013
How to save an Illustrator document as pdf and preserve good quality of its objects. Let's say I create a rectangle, save the document as pdf, see result - the rectangle is blurry.
View 12 Replies
View Related
Mar 22, 2013
In CS3 I use a Dust & Scratches filter on a layer in a high resolution (3200+ppi) 16bpc image, then traditionally change the layer blend mode to Difference, make a duplicate of a channel which has the clearest information of where the filtered changes were made, and use levels to increase the contrast on a copy of that channel. Occasionally I get this result though - the Levels adjustment preview shows spots clearly, but clicking OK results in something very different from the preview. This only seems to happen occasionally.and result looks like this:
As the purpose of the channel is to make a mask, the result isn't as good as I'd like. I assumed that the problem might have been the grey starting colour of the channel, so I pushed the 0 up to 9 in an attempt to get a uniform K value of 100% on the darkest areas, and then ran a second Levels adjustment to make the white spots brighter. The second levels adjustment resulted in pretty much the same result as above, again, not what was shown in the preview. I also assumed that it may be down to numbers and that levels is occasionally too limited to deal with all the shades of grey on a 16 bit channel. Probably wrongly as this normally works exactly as required.
This only happens occasionally, and isn't that big a deal - I can quite happily go and use a Curve instead. I'm just wondering why the preview in the adjustment window is different from the actual result. The fact that it only happens on some of my images is what concerns me - purging all beforehand does not make any difference.how to get accurate results in the preview? Is the preview using a different method to show the results? Unfortunately I won't have a copy of CS6 to try this on until a couple of weeks from now, so not sure the best way for someone to try and replicate it on newer versions.
View 6 Replies
View Related
Mar 1, 2013
Is there a way to see the end result of a pattern as you are creating it?
That is a way so you can see the pattern tiled all over the document. So say you are working on a 100x100 area to be the pattern in layer 1, but you want to see this replicated over an entire document. Maybe you have an overall image/document that is 800x600 say, and you work on the 100x100 area in a layer. Anyway some way of doing is so that when you make a small change in the 100x100 area of the layer you're using for the patter creation, you immdiately see the replicated result of the 800x600 area.
View 1 Replies
View Related
Oct 14, 2012
I'm using CS5 and beginning to use HDR. When I merge to HDR pro and make adjustments to images the preview window is extremely different from the final image. I'm merging original camera raw images from a Nikon D200. Workflow in ACR is set to 16bit. Output from HDR pro is also 16bit. I adjust using the preview window, but after final processing the resulting image is grossly different, much more saturated and more vibrant among other differences.
View 2 Replies
View Related
Apr 25, 2013
Scaling on a pattern layer sucks. When you scale a layer up or down (anything other than 100%), the end result is blurry and ugly. Here's an example: URL....
I would love to be able to choose the scaling algorithm used. In this case, the raster layer was scaled down with a bicubic algorithm, which worked fine for it.
View 1 Replies
View Related
Dec 12, 2012
I've recently tried using the Photoshop HDR feature. I have selected three different exposures in Lightroom and chose to merge them as an HDR image. All went well until the preview. I've found some settings that work really well. I've decided to go for the 16-bit path, not using Lightroom's 32-bit image capability, and let Photoshop do the tone mapping for now.
Here's what my preview image and the entire tool window looks like: [URL]
And this is the result one step later. It's totally over-saturated and has other merge errors. It basically doesn't even look similar to the preview. What's the preview good for if it doesn't show what I'll get? How should I decide what setting works good if I can't see it? [URL]
This is Photoshop CS6 x64 on Windows 7 SP1. The source images are 16-bit TIFFs as they were exported by Lightroom.
View 1 Replies
View Related
Mar 28, 2012
I was scanning some old family photos and came across one that isn't an original photo but looks like it was printed on one of those little remembrance cards that are passed out at funerals and it is made up of little dots. The scanned image ends up with a kind of plaid pattern on it because of the dots:
I took a picture with my cell phone and it looks better.I have never tackled anything like this before and was wondering if there is a standard way of improving this kind of picture to look more like a photo.
View 13 Replies
View Related
Jul 1, 2012
I'm having a bit of a problem with audio crackle. With one music track playing on the background, and an audio file set to play simultaneously, results with a crackling audio file. As far as I can say, the music file on the background plays OK regardless if the voice track crackles. The individual clips play OK, so this isn't because of the source audio. The project is a trailer, with the narrative voice consisting of audio files on the voice track and music playing on the background. It doesn't matter whether the narrative audio is set on the voice track or an additional music track, same problem every time.
The funny thing is that this only occurs when I'm using the timeline view or creating a video / an audio file from the project - in the 'sound mixer'- mode everything sounds and looks perfect. When I select the sound mixer and then click 'share' -> create video / audio file, the program apparently switches to the timeline view and the crackle transfers to the end result as well.
I've tried this on XP and Win 7, with no difference whatsoever. Updated Direct X, installed RealPlayer, Media Player and a whole bunch of codecs, but to no avail. Tried .ogg, .mp3 and .wav as audio formats. This is actually what I find really weird - an uncompressed .wav is the last file type you'd expect to have problems with.
View 7 Replies
View Related
Jun 14, 2012
I am making a Blurb photo book in CDx4. Everything goes very well. But then I try to publish the result to pdf/x3, as requested by Blurb. The colors of the bitmaps are wrong, dull. I try to publish to acrobat 4. Everything is all right. Other pdf formats seem to do very good as well.
I think it has something to do with rgb and cmyk, but whatever I try to change, it does not work. I converted the bitmaps to cmyk, I changed things in the color management (had things with that in the past -> color management off seems the best), nothing works.
View 4 Replies
View Related
Feb 23, 2012
Same hatch properties but different result! How come?
In the screenshots below, I got a hatch of the same properties, but the output in the screen is different!
Software: AutoCAD 2014, AutoCAD C3D, AutoCAD M3D, Revit
Windows 7 (Ultimate 64 bits),
Firefox 20.0,
Kaspersky 2013.
View 9 Replies
View Related
Jun 13, 2006
I cut with the pen tool. The path was not complicated and had many straight edges to follow, so I didn't have to click many points. After I completed and closed the path, I sel the icon, load path as selection and then the path became this bizarre zig zag, almost electric marching ants effect. Then I deselected and there were like hundreds of anchor points at every centimeter or so. The edges of the selected area however were normal and smooth.
View 9 Replies
View Related