3ds Max :: Viewport Is Running Out Of Memory
Jun 7, 2011
I am trying to photomatch a model.I have hi res plan in as a jpeg and and a Site photo on the camera window.Basicaly the viewport is running out of memory.Can Nitrus be turned off, as it is not up to the work load.
Spec:
Dell Precision 690
Window 7
Max 2012 + hot fix
12gb Ram
GC: GTX 480
Worked with 2011, so why can't it work with 2012.
I have image proxy turned on also and set to half 512.
Is it the new viewport set up?.if i loose time i looes money and that suddent happen when you pay big money for a programme, so i am hoping an answer comes quick.
View 2 Replies
ADVERTISEMENT
Sep 4, 2012
While working on assembly detail drawings my system pops up a message that " Running low on memory ".
View 3 Replies
View Related
May 29, 2012
What is the reason for the error " Autocad is running out of system memory ".
when i open a drawing more than 5 mb, my autocad is getting very slow and this error is coming.
My system specifications are
intel(r) Core (TM)2Duo CPU
E7300 @ 2.66Ghz
3 Gb Ram
View 6 Replies
View Related
Jun 5, 2012
The company I work for has requested what PC specifications Autodesk recommends for use with inventor. We are currently using 2011 but would like to have the recommendation for the latest release. We are having major issues with crashes, and running out of memory constantly on working with images as well as routing tubes in assemblies. Any recommendations for PC specifications I should report?
View 9 Replies
View Related
Jul 24, 2012
I have a routine that runs a cycle through 36 large dynamic blocks, then finishes. Somewhere in this code I'm either leaking memory, running a never ending loop, or AutoCAD gets stuck on something. I have a 12gb machine, and this file only uses a few MB on the hard drive. So even after I save and close the file, AutoCAD is using 100% of 1 core CPU (4 core i7) in 0 drawing state stuck at 11gb of Memory (Private Working Set). So, What is this program doing in 0 drawing state, and how is my code responsible? I have to kill it with task manager.
<CommandMethod("SetCurveOffset")> _ Public Shared Sub SetCurveOffset() Try Dim doc As Document = AApplication.DocumentManager.MdiActiveDocument Dim db As Database = doc.Database Using lock As DocumentLock = doc.LockDocument() Using trans As Transaction = db.TransactionManager.StartTransaction Dim bt As BlockTable = trans.GetObject(db.BlockTableId, OpenMode.ForRead) Dim btrModelSpace As BlockTableRecord = trans.GetObject(bt(BlockTableRecord.ModelSpace), OpenMode.ForWrite) Dim curves As New List(Of
[code]..........
View 9 Replies
View Related
May 6, 2011
I am using corel x3 a long time but never, never had this kind of problem. When i work in corel enviorenment after i have finished my work i go to save my work. But then is the problem It Saves the file with Large Memory on it. let's say if the file normally would be 200 K, now it saves with 3 MB. And if i import some other files in my work then the saved file will be even bigger. If i Delete the files that were imported The Saved File will be Again the same SIZE ! Even if a take one part of the file, let's say if i import only one small text and put it in another file and save it like that, the saved file will be 2 MB. I had a lots of problems, i had saved files on this way with 23-24 MB and when i open them it takes like forever. When you look that file in corel it has nohing in it, absolutely nothing that should be 24 MB. But all of my important work is in that files how to make all things back to normal again,
View 9 Replies
View Related
Nov 4, 2011
I do have problem with my newly installed CorelDraw X5. Before X5 we used Corel 12 in our company.
I have project file (150 MB) with lots of text, bitmaps, vectors - about 100 pages. File opens but I can't save it. I always get OUT OF MEMORY error. I even tried to divide this file into 2 smaller parts but still doesn't work.
What I noticed - Corel X5 after clean start (without opened project) takes about 80MB of RAM in task manager. When I open project usage changes from 80MB to 1,2GB. While saving it takes 1,6GB of RAM and it crashes.
To compare - Corel 12 and after opening same project file Corel 12 takes much less of memory - about 770MB and it works without problem.
Where from comes this memory usage difference?
My PC:
Windows 7 - 32bit
4GB of RAM
Intel Core2Duo 2 x 3.0GHz
700GB free space on drive C:
View 16 Replies
View Related
Jul 25, 2012
When I copy a viewport in a layout it does not create another viewport, only a poly line.....
View 6 Replies
View Related
Jul 22, 2009
when I try to open an existing file or create a new one -- the application will shut down unexpectedly and without warning.But I also experience application errors: 'Instruction at "0x1a3c4b6b" referenced at memory "0x00000028" Memory could not be read.
View 9 Replies
View Related
Mar 9, 2012
How do I change a polygonal viewport to a rectangular viewport?
View 5 Replies
View Related
Jan 23, 2013
Problem: When I create a new viewport, another viewport's paperspace blanks out or disappears. When I copy a viewport over, the new VP doesn't show anything and you can't maximize/"enter" its paperspace; it's like a simple rectangle, but the properties box says it is indeed a viewport.
Ex. Viewport 1 shows the top view of an object, Viewport 2 shows the right side view... as soon as I add Viewport 3, the top view in VP 1 blacks out. I attempt to ReDraw, Regenerate, etc, but it doesn't re-appear. I've run Plot Preview to see if maybe it's just a fluke with the graphics card on my screen, but alas, even in plot preview the viewport is blanked out.
It almost seems like there is a limited number of viewports I can use.
Solution: Run the MaxActVP command and set the value to a number greater than the number of VPs you actually need. This particular file had that value set at 2; hence, why a new, third VP blanked out the first one.
View 1 Replies
View Related
Jul 12, 2012
I have a drawing with a viewport that fits to the page. And I created another smaller viewport over top that just shows the legend. Now when I try to double click inside the smaller viewport it always goes into the larger one. I have tried bringing the smaller one to the front but that didn't work. I know that I can clip the larger viewport around the smaller one or bring the legend right into paperspace or slid the smaller one off to the side work in it and slide it back. This is more out of curiosity of how to get into the smaller viewport.
View 2 Replies
View Related
Jul 20, 2011
I am wanting to insert a second viewport over an existing viewport and have the information in the existing viewport behind the second viewport and not seen. I want the second viewport boundary to be the "trimming" edge of the existing viewport. How do I do this?
View 3 Replies
View Related
Jul 1, 2011
I did a test drawing with 4 viewports in paperspace.I frozen a layer in each viewport (as a viewport override, not global), and wrote code to gather info on layer overrides in viewports.The function takes in a database, and is generally used on drawings only open in memory:
public static bool GetLayerInfoFromDB2(Database db) { //do viewports on layoutstry {using (Transaction tr = db. Transaction Manager. Start Transaction()) { ObjectId ldid = db.LayoutDictionaryId;DBDictionary ld = (DBDictionary)tr.GetObject(ldid,
[code]....
the odd thing is it never finds the frozen viewports on the first viewport. It catches the others fine.I cannot see anything odd either, the counts of viewports and layers are all correct, and the drawing has no problems.Is there something that must be done to initialize the mechanism that reads viewport overrides?
View 2 Replies
View Related
Jan 31, 2012
how do you create a viewport within an existing viewport ?
View 9 Replies
View Related
Jun 18, 2013
I have purchased a license for LR4 for my MacBook Pro. To run another copy on my PC laptop, do I need to buy another license?
View 1 Replies
View Related
Nov 20, 2013
After download stopped, it says that Photoshop is up to date. When I tried to open it, it was an incomplete/corrupt file. How can I re-install on Mac running on 10.9?
View 8 Replies
View Related
May 16, 2013
I have an application that needs to convert .psd files to .jpg files.
I have everything working within the program, but the program cannot run without somebody being logged in. Photoshop appears to not run unless somebody is logged in.
Is there a will to get Photoshop to run when nobody is logged in to the desktop. I would like to get this scheduled to run automatically.
View 3 Replies
View Related
Aug 23, 2012
Photoshop CS4 keeps crashing on my mac pro running, 10.8 everytime I move a layer.
View 17 Replies
View Related
Aug 1, 2013
When I start CS6 and launch MiniBridge it says waiting to launch and then just keep running and not launching.
View 1 Replies
View Related
May 17, 2013
I have a pretty beastly pc and photoshop is the only app that is very sluggish when loading or processingDo scratch disks play an important part?
Specs:
I7 920 CPU
Radeon HD 6800 video card
24gig DDR3
320gb SSD (C:)
4x 1tb HDD
View 1 Replies
View Related
Apr 16, 2012
I am running LR4 which has Camera Raw 7. When I choose a photo to edit in Mac PSCS5, it states i need Camera Raw 7 installed in PS. PS has CR 6.6 and states everything is up to date. How to handle this apparent problem?
View 1 Replies
View Related
May 24, 2012
I am trying to run Photoshop CS3 on Windows 7 64bit. Everytime I open the program, I get an error saying "Adobe Photoshop CS3 has stopped working", immediately after the splash screen goes away and the main gui opens. The only option on the error is "Close Program".
View 1 Replies
View Related
Feb 6, 2012
I have Virtualbox running Windows 7 on a MacBook Pro. CorelDraw X4 will not open my existing projects.
View 9 Replies
View Related
Mar 6, 2006
I've been using CS for a short time, but when I open the file browser the program comes to a crawl. I'm currently using a laptop with a 700mhz processor and 512mb of ram. Are there any setup settings I should be using to get the thing to run faster, short of dumping the file browser?
View 4 Replies
View Related
Jul 19, 2004
Could you peeps offer any suggestions on what this problem could be with my pc? In the last few days my system as really slowed down to the point of stopping. I have 1gb ram and 140gb hd, p4 and top graphics card. i`m running norton av to check. If anybody thinks they know what the prob could be please do get in touch.
View 9 Replies
View Related
Jul 13, 2009
I'm working on a character for an engine called "Mugen".
Each character has a spriteset of 300-400 frames which come in PCX, GIF, BMP, or PNG images.
Each of these frames have to apply a certain palette. Which in Photoshop, is called an image with "Indexed 256 colors".
Now here's where I'm stuck. In order to move on, I must have all sprites applied to a certain palette.
there are about 400 sprites, in frames, and it would take a long time to convert all 400 images to one palette.
way to Run a batch/auto-script or something like that?
View 2 Replies
View Related
Jan 26, 2008
I've got a project going with a church to create artwork that will be printed on vinyl wallpaper. So the artwork has to be done large and in high resolutions to insure its sharp when printed out that large. So my files are huge, and my old computer, a Pentium 3 system, couldn't handle it all. Untill I could get a new computer, my mom let me borrow her notebook (XP, Pentium 4, 2gig memory) to do the work on. I installed CS3 and my Wacom Intuos3 pen tablet on it, and besides the fact that it took my files 5 to 10 minutes to open, it worked well. I bought my new computer through ibuypower.com in October. Its a 3ghz Core 2 Duo, 4 gig of memory, Geforce 8800GTX system running Vista. After I installed CS3 and my pen tablet things seemed to be good at first. My files open much faster on it, no more than a few minutes now. But once I got around to creating new work on the computer, I noticed that my pen tablet was not as responsive as it was on the notebook. It works fine about 50% of the time, but the other half the time its really laggy. I'll start drawing, and the new line will stop rendering untill I stop drawing, and then it catches up. As you might guess, drawing blind like that is no good and I usually have to redo it untill it starts running the way it should. Now initially I thought I may not have the current Vista drivers for my pen tablet, but that wasn't the case. Then I started doing some work that didn't require the pen tablet, and I noticed that I have the same problem with the mouse. So the problem isn't the pen tablet at all. Its got to be how CS3 runs under Vista. It was running fine under XP on my moms Pentium 4 notebook, but not good on my superior new computer. Has anyone else here had similar problems? I've heard that Vista is a memory hog, so what are my options? I've considered dual booting, or even just going back to XP, but I'd rather not do anything that drastic untill I know I have no other options.
View 2 Replies
View Related
Oct 17, 2008
I'm running:
AMD Phenom 9550 Quad-Core processor 2.20GHz
4GB Ram
Windows Vista 64
My graphics card: Dual SLI Geforce 9600 GT (1GB Ram)
I booted up CS4 last night expecting to see an amazing difference, and well I did. It ended up seeing slower redraw rates and it chugs when I pan through big images.
I have a feeling there's some setting that I'm not doing right. I updated my Geforce drivers.
In the Nvidia control panel, there are a ton of settings for the Photoshop CS4 applications that I've been playing with but cant seem to get a favorable solution. Anyone have an Easy Button for this?
View 22 Replies
View Related
Jul 1, 2009
Ive upgraded my pc to get better performance out of cs4 that Ive been using for about a month now, e8500 cpu Asus P5Q Pro m/b 4Gb ramm and Gigabyte ati radeon 4650 1 Gb Graphics card, keep getting error message cs4 had to close, I suspect its a conflict with new graphics card. Ive down loaded cs4 update and card has latest driver.
View 5 Replies
View Related
Jan 8, 2008
how I might get this running ink effect?
View 8 Replies
View Related
