3ds Max :: Unable To Attach DWG File?
Oct 22, 2011
I have been working in a 3ds Max 2011 file for a few days with a AutoCAD 2011 dwg linked. It has been working fine. I have just tried to reload the CAD file as I have been doing all along and it now has the error message "Unable to attach this file; the file may be missing, corrupted, or may not contain valid data".I have tried starting a new Max file and attaching various other CAD files but none will work, I get this error every single time.
View 2 Replies
ADVERTISEMENT
Jul 9, 2013
I am encountering an issue during importing a model from DWG file to 3DsMax. There is an error pops up "Unable to Attach this file....". I have attached the picture of the error (Capture.PNG).
I have also attached the DWG file for reference. I don't see anything wrong in the dwg file.
View 1 Replies
View Related
Feb 12, 2013
Since updating to v4.3 I am unable to attach watermarks
View 3 Replies
View Related
Aug 20, 2011
I have been unable to attach two pipes to a headwall. Tried to make the headwall wide enough but each pipe still overlapped. My current work around is to use two headwalls. Is there a way to get the double pipes with a single headwall? or am I stuck with two headwalls.
View 5 Replies
View Related
Mar 5, 2013
whenever I click to attach a drawing reference nothing happens. I don't get the browse to file window.
I've tried using the GUI from the View menu / Palettes panel/external palette, Also from the command prompt by typing external references and attach still no joy.
I have all SPs installed. I tried exporting another user's profile and importing it to my CAD. Do I have to reinstall the software from scratch?
View 4 Replies
View Related
Dec 10, 2013
I have an equipment list on excel 2013, that I can't insert into my AutoCad (2014) drawing. I've tried using paste special, paste link, using both as excel work book and as an autocad table. I have a wide variety of problems with both. Pasting as autocad table sometimes it wont update, when I try to update the link it locks up the drawing. When I paste as excel workbook it doesn't plot, although it show on plot preview. Is there a memory setting that has to be changed on autcad I have 12 gigs of memory on my computer.
View 5 Replies
View Related
Dec 27, 2011
I'm fairly new to Map 3D and I'm trying to attach either an Excel or Access file as a data source. I started out with a simple test case and created both Excel and Access files following the steps outlined in the first reply in post:
[URL].......
When I get to the drag & drop step to attach the data I get the following error messages:
Invalid Wordspace file format: My DocumentsTEST.xlsx
Invalid Wordspace file format: My DocumentsTEST.accdb
Not to be deterred, I saved the source files back to earlier xls and mdb file versions and was successful at attaching the data in both cases, but Map reported that there were no tables when I tried to define a link template.
View 5 Replies
View Related
Mar 18, 2012
I trying to attach a CPT file to a post.
I see where the "insert media" button, but when I try to upload the pic it says invalid file type.
View 7 Replies
View Related
Jul 2, 2013
I'm trying to attach a DWG file to my post but it is appearing not to let me. Shouldn't I be able to attach that type of file? Or is there another file type I should be using?
View 6 Replies
View Related
Jun 9, 2012
Trying to send photo by email attachment or photo email.
Had previously done the verification code thing and got the code and have been sending pics by photo email.Have got PS10 loaded to my Desk Top - main system and also my laptop .When trying now to send pics on my DeskTop I can get to the (maybe second) screen where you choose the size of the phots and then I get the Verification Code screen - which tells me that an 'initial verification code' will be emailed to the chosen email - but when I say continue, I go to the next screen of the Photo email and then when trying to send the phto email it locks up and says an unexpected error has taken place ...
I have sent some photos via the laptop but it seems to be very hit and miss at the moment.Also I have some problems opening PSE10 - When I click on the icon - I get the initial "organise or edit" screen where I choose organise - but then all that happens is this screen closes and the Organiser does not open. Most of the time I'm left with maybe shutting down my whole computer and starting up again and it works again.
View 4 Replies
View Related
Aug 27, 2012
For retrieving information about attach DWG file there is a API call "db.GetHostDwgXrefGraph(true)"
Similarly is there any API call for Attach Image files
View 2 Replies
View Related
Mar 11, 2013
Is there a way to attach a reference file such as a pdf to an idw browser in R2013? There are many times we include torque specs, etc and it would be nice to include the catalog page or some reference to the original manufacturer specs.
View 1 Replies
View Related
Apr 16, 2012
I tried the dgnattach command, but got an error message that my dgn file could not be opened. how else I can import/attach a dgn file in my dwg?
View 4 Replies
View Related
Aug 30, 2013
If it's possible to attach File Info such as Copyright to a (final) .png image? I could have sworn that I've done it before but just now it didn't work.
View 18 Replies
View Related
Jan 4, 2012
I was wondering if I'm currently using AutoCAD 2010 and when I try to attach a PDF the browse file window is missing. The only thing that shows up is the option to type the location of the file on the command line. The window use to show up but I must of unknowingly clicked on a command to disable it.
View 4 Replies
View Related
May 7, 2013
how do I attach or insert a drawing from one dwg file into another dwg file? I'm drawing some and i want a site plan off of a different file i just want to take it and but it in my new drawing without have to draw the site plan over
View 3 Replies
View Related
Jun 7, 2012
Is it possible to attache a PCG file created with ACAD 2013 in ACAD 2012? I ask because I keep getting the message "the point cloud data file is not valid!". I have tried using both x86 and x64 and get the same error. I have also tried with ACAD 2011 and get the same error. The file was created from a Leica PTS file.
View 2 Replies
View Related
May 19, 2012
When I first installed Adobe Photoshop CS6 I was unable to run Photoshop or Bridge CS6. Photoshop would give me an error about "could not open a scratch file because the file is locked. If I ran either of these programs as an administrator they would run without issue, this led me to believe that there was a permission issue somewhere. After some digging I found out the both Bridge and Photoshop try to create a temp file (similiar to Photoshop Temp2777223910092) on the c: drive of the computer. In my case the user that I was logged in with did not have access to write to the root of the C: drive. Note that you run the program as the administrator and change the scratch disk location as that changes the preference for the administrator user and not the user that you are currently logged in as.
I first had to give the user that I was logged on with write permissions to the root of the C: drive. Next try and run Photoshop, you will get an error another error about the scratch disk and about and invalid or missing setting file. To correct this you need to have run Photoshop as an administrator, next you can go to Users AdminAppDataRoamingAdobeAdobe Photoshop CS6Adobe Photoshop CS6 Settings and copy Adobe Photoshop CS6 Prefs and/or Adobe Photoshop X64 CS6 Prefs to Users<your logged in username>AppDataRoamingAdobeAdobe Photoshop CS6.Adobe Photoshop CS6 Settings.
View 93 Replies
View Related
Feb 12, 2013
I found this error a bit strange, my colleague it trying to save a file and this error keeps on coming out (see attachments). When we try to save it, it only saves as a temp file. When we try to open up the temp file and try to save it, it still doesn't allow us to do. Also, when we cancel the save, the original file will be gone and he will lost all of his data. Below are the specs of the computer and version of the AutoCAD.
Computer: DELL Precision T5500
OS: Windows 7 Ult
AutoCAD Version: 2011
Also, we're using ProSteel Series 3 as well. We tried saving the file using ProSteel and just AutoCAD but it didn't do the trick. I've tried some options (listed below) that might get it to work but still no luck.
1. Restart the computer.
2. Repair / Reinstall AutoCAD.
3. Give permission to the folder (read from the forum).
View 4 Replies
View Related
Nov 22, 2012
We have three old drawings (saved in the year 2009) that we are trying to open with AutoCAD 2013 and we keep getting the message "Drawing File is not valid".
I have done the following:
Files do have a file size. Sometimes, files have 0 KB size, but not these ones.
We tried to open the files using AutoCAD 2013, AutoCAD Architecture 2012 and DWG TrueView (downloaded today!) and in all instances we get the same message.
We tried recovering and the message is "unable to recover the drawing file"
We tried inserting as a block and, in the command line we get "...was created by an incompatible version of AutoCAD *Invalid*" Again, the file is genuinely older than our current AutoCAD.
View 9 Replies
View Related
Jan 1, 2014
I have edited my video using after effects. I have been unable to export my file to youtube using a valid file name. All of the results have issues with sound and quality.
View 2 Replies
View Related
Mar 1, 2011
I have autocad civil 3d 2008 in my pc. From last 2 days I got a different problem i.e. when I am selecting open / save command from File menu graphical file select explorer is not opening just message in the command window . Previously I used to select files using graphical file explorer.
View 6 Replies
View Related
Nov 13, 2011
I have a new mini recorder which records 720x480 at 29.897 fps. Video studio says Unable to open file *****.avi for all of the files. They play perfectly well with MS media player, VCL, Quicktime etc so what is wrong ?
View 9 Replies
View Related
Apr 13, 2012
I opened a previously saved project and all the AVI files have blank spaces. When I click properties it says the file is unreadable. When I try to open the file it says unable to open file, catastrophic failure.
These are the same files that I used to edit and render a video a few months ago, and I was able to successfully open the same file in Windows Media Player. I am using VSX4 on a Windows 7 laptop. I'm not sure what updates are installed.
The video file is DV AVI file (720 x 480, 28854 kbps data rate, 298788 kbps total bitrate, and 29 FPS).
View 4 Replies
View Related
Aug 15, 2012
I have a windows 7, 64 bit quad core with 8 Gigs of ram, and 500 gigs of hard drive. I'm using the latest Video Studio Pro x5. After some time, and not always at the same time, it stops capturing, and says "unable to capture video because it is copy write protected". It's not copy write protected, and I cannot figure out how to get it to stop doing that.
I'm capturing an old VHS tape using an Easy Cap (the one that is new, and works). Apparently there are some old Easy caps that do not work.
View 1 Replies
View Related
Apr 18, 2011
After extensive editing I saved the result as an avi file. When I tried to open the newly created file I got the message:
File format mismatch. [1081.1.3]
I have many other video playback programs and, with the exception of Real Player, they all can play back this avi file I had just created with VS Pro X4. The Program GSpot finds no problems with the file.
Emails to Corel remain unanswered and telephone support held me waiting for hours, only to disconnect when it was their quitting time.
View 1 Replies
View Related
Sep 25, 2011
At the moment, the only file format that I can import on the edit tab is *.wmv. There should be no issue importing *.avi or *.mp4 or any other format for that matter, but it fails to open the files. I keep getting the same "unable to open the file 17101:7:1" error for seemingly no reason. Everyone says this software's functionality is wonderful, but if it won't even let you bring in normal files it's looking less and less useful all the time.
View 7 Replies
View Related
Feb 28, 2009
I have a PSD file I have been working on in CS3. This was created from a .nef raw file and saved in 16 bits/channel.
When I go to save the image as a jpeg and convert back to 8 bits/channel Image => Mode => 16 bits/channel is selected and greyed out, along with the 8 bits/channel option. So at the moment I am unable to save the image the image as a jpeg.
View 13 Replies
View Related
Dec 13, 2012
I built a building in AutoCAD Architecture 2013 and inserted the file into 3DSMax 2013 via the file link manager. I would like to group certain AEC objects from my DWG file in 3DSMax so that I can assign materials, move them around without losing placement, but the "Group" and "Assemble" drop-downs are disabled. Why am I not able to group these objects?
View 2 Replies
View Related
Oct 7, 2013
With the AutoCAD Revit 2014 I am unable to open DWG file. It gives me a failed to open error. I have attached screen shot below. We did download DWG TruView 2014.
View 1 Replies
View Related
Aug 9, 2013
I opened a file that was saved as .ai but I am unable to edit it. It's as though it was saved as a pdf (or similar uneditable document). It still has 2 unlocked layers. Why did it save that way and how do I fix it?
View 2 Replies
View Related
