3ds Max :: Retimer / Time Span Menu Not Displaying?
Jan 16, 2013
I'm trying to use the retimer tool, which allows me to theoretically access the 'time span' menu.
Right-click the horizontal arrow between the tops of the two markers. This opens the Retimer Span Type right-click menu, where you can set the span behavior.
But it simply isn't displaying for me. I've got the latest Nvidia drivers and the latest product update.
I'm about at the end of my tether - I should simply be able to right click the horizontal arrow and display the menu.
It's called the retimer span type menu - and it doesn't open!
It seems to happen randomly and I can't tell what triggers it. Everytime I regen or autosave/save the status shows "displaying contours" and a load bar that takes way too long and slows me down...
I have Windows 7 and recently unistalled PSE 10 and it did not have this issue; Now Photoshop CS6 is displaying the menu dropdowns as shown in Image 1. Bridge CS6 does not have the issue;it is showing the menu bars correctly (see Image 2). I downloaded and installed all updates.
I'm using one of the new Mac Book pro Retinas. Every time I open the Type>Font menu the program crashes. Sometimes I can scroll down a little ways but sometimes it crashes immediately.
In trying to learn more about label styles, the C3D Help instructs one to:
2. On the Layout tab of the Label Style Composer, select or create the label component that you want to span multiple segments.
3. In the Properties list, under General, change the Span Outside Segments property to True.Specify this setting for each component that you want to span multiple segments.
There is no "Span Outside Segments" to set to True in my Label Style Composer. The only T/F option under General is for visibility.
Civil 3D 2013 SP 1, 64 bit Dell Precision T5600, 16 GB Win 7 Professional 64 bit Intel Xeon @ 2.0 GHz NVIDIA Quadro 4000
Over the years I used laminate beams when I needed to clear span space in residential homes, especially garages and great rooms. I been out of it for a long time now so my question is this, what's the latest thing going to clear span a garage or great room area? the span is 24'-6" to outside walls. To add insult to injury I have 16' feet over the garage that will be floored for future living space.
Mastering C3D - the bit about spanning segments on an exterior line crossing several parcels. It works like the book shows except the crow's feet only appear at the start and end of the parcel's segment that I click on to insert the label, instead of the start and end of the whole segment. The distance the label reports is correct.
The crows feet are blocks inserted at the start and end of the direction arrow component (visibility false) in the author's style? I have turned the arrow's visibility on and can see that the arrow does not span the parcels.
I have another drawing in a later chapter on alignments that has the same spanning label style that works and I can't for the life of me discover the difference between the two.
Civil 3D 2013 SP 1, 64 bit Dell Precision T5600, 16 GB Win 7 Professional 64 bit Intel Xeon @ 2.0 GHz NVIDIA Quadro 4000
I have no problems labeling parcel lines but am having issue with overall spanning labels. For example, the crows feet are showing at the beginning and end of a subdivision property line but the distance is incorrect. I found that that distance shown correlates back to the parcel segment picked not the overall subdivision property line. How to get the overall span distance to report correctly?
i am trying to do the plan production stuff, any way to span the profile across the entire viewport. I don't want it centered in the middle of the viewport, i want it to take up the entire viewport and just create the profile with enough height and length to keep my required scale.
How to represent a bottomless arch (arch span)? I can make a horizontal arch pipe, but I only need the top half. I also thought about building a corridor.
We do have a storm drain system running perpendicular above it and need to show the arch as a crossing. Corridor would work but I think I would prefer a pipe network-type solution.
Ok some times when I go to run details it pops up that it can not load the component database AecDtlComponents (US).mdb file. I go to options and can not do anything there. So I have to close it all down and hope when I reload AA it works. 9 out of 10 times it does. But this is a pain to do when ever you need to add detail stuff. Oh also this happens on more then one computer in the office. running 2012 with sp and all updates on windows 7
I'm trying to change "capture time" of multiple photos to a specific time.
I know that there is "Edit Capture Time" feature under Metadata. But when I try to edit multiple photos, it says that "Modify the capture time stored in the selected photos by entering the correct time adjustment for the photo displayed to the left. Other photos (but not vidieos) will be adjusted by the same amount of time". And it really does.
For example, If A file's capture time is 1/11/2011 B file's capture time is 1/11/2012 C file's capture time is 1/11/2013 I would like to change their capture time to 1/11/2014. All the three files.
But the current "Edit Capture Time" feature of Lightroom just adds three years to each file like this:
A file's capture time -> 1/11/2014 B file -> 1/11/2015 C file -> 1/11/2016 So their capture times remain as different ones. And this is not I want...
I've googled a lot and tried several programs other than lightroom as well, but the "Capture time" recognized by lightroom could not be changed by other programs.
I am updating capture time based on GPS Time (a bit OCD, I know) but when I change Capture Time the Date Time Digitized value does not change. This in in LR 4.3 and is not affected by whether on not the Catalog is set to 'Write date or time changes into proprietary raw files'.
I have been trying to figure out if I can make capture time changes to adjust for time zone errors or the daylight saving time mistakes where the capture time in the Metadata panel is off by 1 hour or so, and then have these adjustments saved permanently to the original files (master photos). This works for JPEG files and it also works for DNG files (after converting from CR2 to DNG). But it doesn't seem to work for CR2 files directly. If I used the "Save Metadata to file" option from the Metadata menu I might just get sidecar XMP files.
Then I found this option "write date or time changes into proprietary raw files" in the Catalog Settings. This seems about right. But what does it do? I tried enabling that, created a new catalog and then imported some new CR2 files. I then changed the captured time and tried the Save Metadata to file option. It still spits out these sidecar files. It doesn't actually write this to the CR2 files.
Or does it? Perhaps I am not seeing it in Windows Explorer? Like IPTC vs. EXIF? I'm not sure Windows reads both. These are like different types or sections of metadata information about a file. So I just wonder what the benefit or consequence is of having this option enabled? Whatever it is, it is not very apparent. And as you can see from the screenshots above the capture time has not changed (not been saved) when you look at the file in Windows Explorer. Any changes are held in the XMP sidecar. Even thou I have enabled this EXIF option in Catalog Settings.
I note that from time to time I can't see the counter and this is quite an annoyance. When the invisible pointer hover over or passes over an object, the latter will highlight as usual. I have to close and restart the drawing each time due to this issue. Is there an explanation for it, even a solution to prevent this from happening?
NOTE : This is limited to the drawing area only. I can see the pointer in the menu/toolbar area and outside autocad but not in the drawing area.
I want to add a watermark to a photo which encompasses a progress time or finish time of a sports event. For example, if an event starts at 7.00 am, photos taken at 8.05 am, in the watermark I want to display 1:05 hr (or 65 mins).
A co-worker scanned a photo and emailed it to me to edit it and try to improve it, but everything I want to do is grayed out so I can't select it and I can't figure out why. Maybe it has to do with how she scanned it?
It's CMYK, 300 dpi, and 8 bit.
I'd like to sharpen it and adjust the hue/saturation, but they're grayed out.
why this is happening and how I can work around this so I can make the changes I need to make?
I recently upgraded to 2012 but forgot to install the express tools, Doh!. I installed them through control panel repair and everything works. Except when I close and restart ACAD the menu bar express menu disappears. I can bring it back by using cuiload but this is not ideal. Any way to get it to stick?
How do I add custom menu items to the main menu in Illustrator?
I would like to build my own menu with scripts that I use alot. This is a powerful feature that I use alot in other programs, but I have not seen any examples of this in illustrator.
all the twirly triangle dropdown menu things (what's the official term?) underneath the contents menu of layers. Especially now that I'm working with Convert to Shape Layer functionality I'm wondering what an efficient/shortcut based way to work with these inner menus is. For instance when converting Text to Shape layers - it seems like I'm spending most of my time dealing with twirly triangle management
I don't even know how to search for them: obviously searching for anything "collapse" takes one to a bunch of collapse transformations stuff.
Using VS X5 - Just making up a menu for my dvd im burning. Haven made a menu since using ..VS11+ I think it was.
All seems very very familar...similar etc and not asking it to do anything out of the ordinary which 11+ couldnt cope with ( just nowadays using all this AVCHD malaky etc )
Question -Main menu of my dvd - Why am I getting on my main menu page the begininings of my movie!!! I have my main menu setup ( bringing in a pre-made 30second clip on which I will put 'Press Play to watch movie' and/or 'chapter select'. ) When i preview my main menu page...I see the 30second clip i wanted but as it runs so too does my actual movie - at the same time.
I cant seem to find a button to ..basically..tell it not to play the movie as soon as you load the dvd but instead to wait until the 30 second main menu runs and automatically reruns etc until YOU decide to press the 'Play movie' button.
When selecting a sub menu from within a main drop down menu the arrow points to the right but the actual sub menu pops up on the left in most cases. I have only noticed this recently and wonder if I have inadvertently messed up a setting as in the past I cant recall this being so but I don't use the editor a lot so may be mistaken.
I have a Canon S100 and just started importing photos and video into my LR 4.3 catalog. I convert RAW to DNG, and the Capture Time on the photos in LR is correct. However, the video Capture Time is shifted forward exactly 8 hours. I know how to correct the video Capture Time, but is there anything I can do to stop this from happening in the first place? I looked at what the metadata looks like in Bridge.
PHOTO: Date Created = Correct Capture Time Date File Modified = The time I imported the file into LR.
VIDEO: Date Created = Capture Time + 8 hours Date File Modified = Correct Capture Time
I am working on a plugin for adobe illustrator CS6 by using adobe CS6 SDK. By using this plugin I need to add a Me nu Item In File Menu of Adobe Illustrator.
I have used the following code for this: ______________________________________________________________________ ________ SPBasicSuite *mBasic = message->d.basic; AIMenuSuite *sAIMenu; mBasic->AcquireSuite(kAIMenuSuite,kAIMenuVersion, (const void**)&sAIMenu); SPPluginRef plugin;
I have bought an Easycap capture device and it is installed properly. However when I try to capture video from VHS I get the message "The sample start time is after the sample end time"
My old laptop tried to self-destruct, so I was forced to move a huge amount of art files to a new laptop. Now, I have no thumbnails in Photoshop (PS3 using XP Professional) and oddly enough, it appears that often entire folders and files aren't showing up when they're actually there. The only thing I'm seeing is the PSD logo. .tifs, .jpgs, and other formats aren't even showing up as being on the disk.
I've gone through all settings that I know of and can't seen to find the 'fix'.