3ds Max :: RAM Player Exporting Very Dark Video
Dec 7, 2012
So, I've rendered my still images with iray, and opened them in RAM player. So far, so good. Video looks and plays great. But when I save the video file (no matter which format or compression I use) the end result is really dark. Like, I can barely see the animation dark.
I've attached images comparing the RAM player view and the resulting video in WMP.
On a side note, the reason I'm using RAM over other post editing software is that I only rendered every 5th frame for sake of time. In other software, the video is really choppy, but RAM player handles it beautifully.
Using Autodesk 3ds Max 2013 x64
View 2 Replies
ADVERTISEMENT
Jul 3, 2013
How can I run Flash player on Photoshop video series (CS5 Extended)?
View 1 Replies
View Related
Dec 28, 2012
Way to pick an alternate video player. I'm a pse 11 user, I only use the organizer for my pictures and video. I like to view them in it. It's always a lot of trouble to view videos in the pse video player because it cannot play most of them out of the box. It cannot be set in full screen. I would like a shortcut like the image one, edit in alternate editor. It would be view in alternate video player, I would use vlc and never bother with the embedded one.
View 1 Replies
View Related
Nov 7, 2012
I made a dvd video on elements 7 (wmv) but it will not play on a dvd player. If I upgrade to elements 11 will it allow me to burn a dvd that will be a different format to be played on a dvd player?
View 2 Replies
View Related
Mar 7, 2012
When watching more (3 to 4) videos after one another, the video player just stops working.After a while (a minute or so) I get an error message: "There was an error working with the video".
The only way (so far) to get it to work again is to restart Windows.And then again, I can watch 3 to 4 videos before the problem occurs again.My computer runs 64-bit Windows 7 with 8GB RAM.
View 5 Replies
View Related
Apr 12, 2011
max 2012 camera tracker not work (i.e) the stepper dose nothing and trackers diapear from video player.
View 1 Replies
View Related
Jan 17, 2014
on an athletic field we are trying to show only the movements of 1 player...is it possible to "delete all of the other players movements and just show one player and then overlay that video on the empty field?? I believe it is possible because shows like Sportscenter achieve this type of stuff but am not sure which tool is used and where to start...
View 3 Replies
View Related
Jan 9, 2014
Is it possible to capture video using Premiere Pro (or any other program from the Adobe Creative Suite) directly from my dvd player on my PC or my superdrive? If not, how can I capture video from DVDs? These are not copyright protected DVDs. They are copies on DVD of on-camera work I have done that I would like to digiitize to make a demo reel.
View 11 Replies
View Related
Dec 22, 2008
I have a multilayered psd file (RGB 8 bit, 955 px x 600 px) and have created an animation (8 seconds) using the animation panel in timeline mode. File consists of 4 image layers and 3 text layers. When I choose File/export/render video, The quicktime options are grayed out and all I can do is render jpgs from the sequence.
Photoshop CS4 extended
XP Pro SP3
Dell Laptop
NVIDIA Quadro FX770M
4 gigs Ram
207 gig scratc
View 2 Replies
View Related
Jan 7, 2013
I am ready to pull out my hair.
I have been trying to do some color adjustments (b/w) to video and then export it to use in birth slideshows for my clients. Everything works great....until its time to playback the video after export...and which point I have NO audio. I have converted to a smart object and I have tried without converting it to a smart object. I have tried selecting all layers and then exporting/rendering. I have tried just opening a video and then exporting and rendering to see if it was something that I was doing in my adjustments that caused there to be no audio??... Nothing is working, though
I have read various comments (all over the web) saying that you can edit the video as long as you don't care about losing the sound...yet other sources say that you will have sound. What am I doing wrong?
View 4 Replies
View Related
Oct 13, 2010
So like many new videographers is am shooting with the 5d markII which obviously shoots in HD.
However i cant seem to export my HD file out of VideoStudio.
When i drag the clip onto the timeline and right click on the clip and go to properties it says it is in 1920x1080. However when i go to create a video file ans click same as video settings it exports it to 720x480 at 29.97 frames per second. And the video was shot at 24fps.
So..
a) i don't understand why it is exporting it to totally different specs that what the project really is?
b) how to i export to an mpeg file that is 1920x1080 from VideoStudio.
View 2 Replies
View Related
Nov 3, 2013
I shoot RAW photos. I like and use Premier Elements 11 to make video. Frequently I insert photos in the videos and enjoy using the Pan and Zoom technique (frequently credited to Ken Burns).
Resizing photos support Premier Elements to run smoothly. The LR Export command makes it easy. Using PSD files works well in Premier Elements. However, I am confused about settings.
My understanding is that if no Pan&Zoom or cropping is to be done in the video the export should be 1920x1080. If Pan&Zoom is planned, the setting should be higher by about 50%. LR makes it simple by letting you specify the "Long Edge" so the setting would be 2880. The short edge will match the original.
What about "Pixels Per Inch" for a HD 1920x1080 video project that may be played on a big HD TV or smaller YouTube? There is plenty of information about PPI for printing and computer monitors, but not HD Video.
Here is screen capture for reference:
What should the pixels per inch be set at to match 1920x1080 video? The 140 setting is a complete guess!
View 13 Replies
View Related
Jun 8, 2012
I can't believe there is not more demand for this. My web dev is asking me for over 300 video clips in both .web and .ogg - - AME does not do this.Any success with a 3rd party plug-in of some sort. I can use Fire fogg (from Firefox) but it's slow using over the web as opposed to exporting from Premiere.
View 32 Replies
View Related
Mar 10, 2014
I am new to premiere CS5. I need to send the roughcut to the client for review before further work is done. How to export the project to create a quicktime video? How can I create different sized files?
View 1 Replies
View Related
Feb 18, 2014
I'm having problems with progressive videos that look interlaced after exporting full size.The videos look fine within PP; when the same sequence is exported using You-Tube and Vimeo settings there is no interlacing.
View 6 Replies
View Related
Nov 12, 2007
My friend has taken some engagement photographs and unfortunately the couple have dark hair and the background is also dark - I think you can see her problem with the photos. Somehow the background needs to be lightened and neither of us know how (we both have Photoshop 7)
View 4 Replies
View Related
Nov 1, 2011
one question: is it possible in VS X4 export a video together with a transparent alpha channel (as, for example, a result of a chroma key) ?
View 6 Replies
View Related
Apr 6, 2013
I have tried exporting a video several times now and it simply won't. The first time the export got interrupted, then after that it processed the audio mixdown but none of the frames. At first it made files in the specified location that just wouldn't play, but the last few times no file was created.
View 5 Replies
View Related
Dec 9, 2013
I'm exporting DSLR footage with synced audio in order to "bake" the audio in. I'm going to bring the export into Prelude to organize and then back into Premiere to edit. What are the best export settings (including target and maximum bitrate) to maintain top quality footage that I'll continue editing?
View 1 Replies
View Related
Mar 12, 2013
I record video tutorials about Photoshop (so, screen captures) and edit/combine the clips inside Photoshop CS6 in Win 7/64; Photoshop's new video talent is nice. I record 852x480px at 15 fps with FastStone Capture and save in WMV. I want to show the finished video tutorial on Youtube. There are several things baffling me when editing video in Photoshop CS6.
My original records (according to MediaInfo):
Software: FastStone Capture
Overall bit rate mode : Variable
[code]....
The result looks very nice when i play it locally in VLC. It looks like the original WMV. But: When i upload the Photoshop-version to YouTube, the video looks very badly "upsampled" and blurred. It looks much worse than the uploaded WMV original. If you like, you can compare the two videos from the same source online:
Uploaded WMV clip, looking good (set player to 480 p): URL....
Rendered in Photoshop CS6, looking bad (set player to 480 p): URL.....I do like the resolution of 852x480 and would like to keep it. If not possible, i have to record tutorials in 1280x720, even though icons and menus look too small. So far i have not tested it.
I searched my folder C:Program Files (x86)Common FilesAdobedynamiclinkmediaserver1.0. There is a lot in it which i don't understand, but some file names include "MPEG", "AVI", "Adobe QT Server" etc. I think there is no Quicktime installed on my machine; i try to avoid it as it does many different things to the system and is obnoxious.
My questions:
- When aiming for a YouTube cast, could i stay with 852x480 (at 15 fps), or doesn't it make sense? (I like that size.) If 852x480 is not ok, what is the lowest resolution for getting good looking presentations on Youtube?
- Why does the Adobe Media Encoder in my Photoshop CS6 only offer the formats H.264 and DPX? Can i get more? (Free, pay.)
- Do i need to install Quicktime? How could i do this with less intrusive QT behaviour?
- Should i record more fps in FastStone Capture? (I don't find more fps necessary when looking at the original and when looking at the uploaded *original*.)
View 6 Replies
View Related
Nov 9, 2013
I'm editing .mov 1080p video clips from my DSLR in Lightroom 4.4. I,m using the slider bar to set a new "inpoint" and "outpoint," shortening the video. When I export, I am using the original format and new file name. Lightroom tells me the video is shorter in length, but when I play it back in Windows, the new file is the original length. What am I failing to do/see here? I'm using Win 7
View 1 Replies
View Related
Jul 4, 2013
I have CS3 and bought a CS5 upgrade. Both were loaded on my PC via the cd/dvd player. I am switching to a laptop that I bought without a CD/dvd player. I was able to copy the CS5 CD to a flash drive and load it fine. I was unsuccessful with CS3 so I can't use CS3 as an upgrade. How can I get CS5 to work after the 30 day grace period?
View 1 Replies
View Related
Jun 29, 2012
I am having trouble with the ram player in 3ds max 2013. I am using vray to render and when i try to load the last render into the ram player i just receive a black screen, although the dialogue beneath is consistent with render time,frame name etc.
View 1 Replies
View Related
Feb 4, 2012
When I open channel A and click on the .avi file I want to watch in the RAM player nothing happens. However, once I rename the file .mpeg it works. This includes all .avi files not just the one I'm trying to work on at the moment. How I can play the .avi files in the RAM player since I don't want to have to convert to .mpeg every time I view a video. I'm using 3ds Max 10 on Vista 64.
PS. This seems to be an extension of problems I've been having in general with previewing my animations. Whenever I try to preview my Max animations as .avi files windows media player seems unable to recognize them. I tried changing the default player for .avi files to quicktime and vlc however max doesn't seem to recognize them. If I navigate to my preview folder though and open them from there I can play them in any player except for Windows Media which seems unable to recognize .avi's.
View 1 Replies
View Related
Dec 18, 2013
Whenever I have an open video file with GOM Player (my vide file player) Illustrator will casually crash upon opening, Illustartor would load completely and then just crash. The same thing would happen if Illustrator is open and I want to open a vide file - then GOM Player would crash, after trying to open the same video file, while Illustrator is open, GOM Player would play a black screen. Similarly, if GOM Player is open and I try to open Illustrator a few times at about the second or third try Illustrator will finally load.
View 4 Replies
View Related
Oct 21, 2013
I have an SD Pioneer dvd player...model dv-49av. It plays all commercial DVD fine, but never a DVD I burn from VS. However, any DVD I burn from Corel plays perfectly in my Pioneer 23fd bluray player.
Anything I can do to change this? The disk type (-r, +r etc.) doesn't matter and the DVD that won't play plays fine on the computer. The disk loads fine, but when I select play the video or chapter it just locks up and I have to restart the player.
View 14 Replies
View Related
Nov 27, 2013
VLC media player is not responding Windows can check for a solution when you go online. If you close the program, you might lose information.
→ Check for a solution and close the program → Close the program → Wait for the program to respond When this error message was displayed on my screen, I am wondering about the error message. I managed to play some videos days ago, and suddenly now I cannot run VLC.
I checked my computer for some viruses that might infect my computer. After a full scan, there was no virus found. I reinstalled VLC and same error persisted when opening a file.
View 1 Replies
View Related
May 28, 2011
How to change jersey on a NBA player. It's almost impossible to find a quality step-by-step tutorial on the Internet, especially for the GIMP. For example, I'd like to change Dwight Howard's jersey on this picture with this one.
View 1 Replies
View Related
Mar 6, 2012
Movies from Sony NEX 5n (ADVHD) import fine, thumbnails look OK, player provides broken horizontal lines filling screen with movie playing in back ground. Macbook OSX 10.6.8 4gb ram.
View 4 Replies
View Related
Sep 20, 2011
I have been happily using this program for a few weeks and have nice movies and view well on PC. Only problem I find is being able to save a Movie to dvd to play on a dvd player. The only way I can do it is to save the movie as a video file and then burn to disc using Windows DVD Maker. As far as I can see I have tried all options on Video Studio, and have had no success at all.
View 5 Replies
View Related
Oct 22, 2011
I have a Pioneer DV-49AV DVD player. It will play any/all commercially produced DVD but none that are produced in Vstudio. The main menu will display fine, but pressing the button to go to the chapters or play will hang the unit.
I also have a Pioneer BDP-23FD blue ray player and the same Vstudio DVDs play just peechy. Is there some Vstudio compatibility switch that I need to enable prior to burning?
View 6 Replies
View Related
