on an athletic field we are trying to show only the movements of 1 player...is it possible to "delete all of the other players movements and just show one player and then overlay that video on the empty field?? I believe it is possible because shows like Sportscenter achieve this type of stuff but am not sure which tool is used and where to start...
View 3 RepliesIs it possible to capture video using Premiere Pro (or any other program from the Adobe Creative Suite) directly from my dvd player on my PC or my superdrive? If not, how can I capture video from DVDs? These are not copyright protected DVDs. They are copies on DVD of on-camera work I have done that I would like to digiitize to make a demo reel.
View 11 Replies View RelatedSo, I've rendered my still images with iray, and opened them in RAM player. So far, so good. Video looks and plays great. But when I save the video file (no matter which format or compression I use) the end result is really dark. Like, I can barely see the animation dark.
I've attached images comparing the RAM player view and the resulting video in WMP.
On a side note, the reason I'm using RAM over other post editing software is that I only rendered every 5th frame for sake of time. In other software, the video is really choppy, but RAM player handles it beautifully.
Using Autodesk 3ds Max 2013 x64
How can I run Flash player on Photoshop video series (CS5 Extended)?
View 1 Replies View RelatedWay to pick an alternate video player. I'm a pse 11 user, I only use the organizer for my pictures and video. I like to view them in it. It's always a lot of trouble to view videos in the pse video player because it cannot play most of them out of the box. It cannot be set in full screen. I would like a shortcut like the image one, edit in alternate editor. It would be view in alternate video player, I would use vlc and never bother with the embedded one.
View 1 Replies View RelatedI made a dvd video on elements 7 (wmv) but it will not play on a dvd player. If I upgrade to elements 11 will it allow me to burn a dvd that will be a different format to be played on a dvd player?
View 2 Replies View RelatedWhen watching more (3 to 4) videos after one another, the video player just stops working.After a while (a minute or so) I get an error message: "There was an error working with the video".
The only way (so far) to get it to work again is to restart Windows.And then again, I can watch 3 to 4 videos before the problem occurs again.My computer runs 64-bit Windows 7 with 8GB RAM.
max 2012 camera tracker not work (i.e) the stepper dose nothing and trackers diapear from video player.
View 1 Replies View RelatedI am trying to select a song for a slide show. The song is in the library of Windows Media Player. When I am in LR Slideshow I click on "select music" The Select Music window does not show the Windows Media Player.
This is on a PC laptop with Window Vista Home.
How can I get to the library in the Windows Media Player to select a song?
Can I use "edit in" in Lightroom to move video clips to premier or premier elements to edit them?
View 17 Replies View RelatedHow can I view a preview how all the video transition looks between 2 clips in Premiere Pro CS5 before I choose the one I want to use.
I always use Adobe Bridge CS5 when I need to see a fosmag on the effects in After Effects CS5, but can not get it to work and then I can also see the Video Transitions in Adobe Premiere CS5
when I upload a video to You Tube, I get a warning message that my video and audio are out of synch. Once uploaded, the video plays just fine, looks great. But I don't know why I get the warning when I upload. Video clip and audio track are the same length.
View 1 Replies View RelatedI am trying to "erase" extra video and show only 1 of the moving objects in the video .on an athletic field we are trying to show only the movements of 1 player...is it possible to "delete all of the other players movements and just show one player and then overlay that video on the empty field?
View 3 Replies View RelatedI recorded video on a Black Magic Cinema Camera (BMCC), which has legendary video quality but an awful on-camera microphone with tinny recording process, and recorded audio on a Zoom H6 which has great low-noise, more bits and greater sampling rate capability.
In Premiere I made a Sequence containing the video footage, then added the H6 audio and synchronized it by waveform to the BMCC's audio, which I subsequently muted. I call this a Source-Sequence, as it is intended as a virtual source media item, to be cut into one or more Edit-Sequences (my term).
Not "holding my breath" but trying it anyway, in Premiere's Project/Bin pane, I selected that source-sequence then did RightClick > Analyze Content. Teasingly, that option was not greyed-out. However all options in the the resulting popup-dialog were greyed-out.
In this situation, to be useful, the speech analysis would need to be available to Sequences, not just to (Master) Clips. Obviously one could render such a sequence to intermediate but that would waste time and disk space and would essentially freeze the state of the Source (e.g. including any sync issues that might be discovered later, or whole-source color corrections issues etc.). If one subsequently altered that state, a re-render, re-link and re-analysis would be required. If a Souce-Sequence were used instead, and no alteration had been made to the audio (or if user indicated "don't care"), then there would in principle be no need for re-analysis.
I have a problem - I want to select whats inside of a png file that only has some objects in the middle of the image and it is surrounded by transparency.. so when I select with the shortcut "Ctrl + A" and copy it , when I paste from the clipboard it only gives me the objects , without the transparency and the proportions(dimensions) of the image are not being constrained.
View 6 Replies View Relatedit is possible to render to mpeg 2 with specific settings for VOD content cable provider in Premiere Pro?
Is there a specific preset for it? Or do you really need an external plugin (like the very expensive QT plugin from PIXELtools?
For a cable provider I need to make SD content.Encoded some MPG 2 TS test files and uploaded them to the test-environment of the Cable provider.
The calbel provider said the files are almost approved, they need a little more tweaking.
But the cable provider only gives me a list of errors in return. Errors they see in in the testing environment before publishing.
1. Rendered MPG's have PCR errors (deviation in clock frequention)
2. to get better quality encoded MPG's, they say to stretch the GOP.
Since I'm not in to GOP's, M frames and I-pictures.They gave me a white paper with the following rules....
1. The first byte of the video elementary stream MUST be the first byte of a sequence_start_code.
2. The video elementary stream MUST contain an integral number of access units.
3. A Sequence Header and a Sequence Extension MUST precede each I-Picture.
4. All B-Pictures in the video bit stream MUST use prediction based on pictures present in the bit stream. Specifically, the first GOP in the video elementary stream MUST NOT begin with a B-Picture predicted from a reference picture that does not exist in the stream. That is, the first GOP MUST be closed.
5. For MPEG2 encoding, the length of each GOP SHOULD be 12 frames.
6. For MPEG2 encoding, the number of consecutive B-Pictures between anchor pictures (I-Picture or P-Picture) MUST be two or less.
how to set the above requested into the Premiere Pro exportsettings from below (my settings, to make an MPG
I spent almost more time wattching element updating all the time - than workin with it. But nevertheless it WILL NOT show more than half of the pictures in a new map. Pathfinder shoes 136 files in it - and elements show 52 of the.
View 2 Replies View RelatedWhen I insert a new object (bmp) from file I see a placeholder with the filename instead of the content of the bitmap.Is there anywhere a setting I can change the import of bitmaps.
View 3 Replies View RelatedOn Autocad 2012, can we select blocks with the attributes name?
View 9 Replies View RelatedI have recently installed VideoStudio X4 Pro, and have been a very long time ULead VideoStudio user. I am looking for video content templates similar to the templates that came in the Ulead days... You know the video themes, templates (unable to paste a screen shoot) etc.
In VideoStudeo 11.5+ it came within a bonus content pack. Is there such a thing for X4?
how to select Content Center Part Automatically. Now I use pick methode for select CC part.
Here's my code :
Private Sub Button1_Click(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles Button1.Click 'Membuat koneksi ke Inventor Dim m_invApp As Inventor.Application = Nothing m_invApp =
[Code]....
how would I go about applying content aware scaling to a video layer inside PS? Basically I'm trying to use this feature to fake an aspect ratio change where by I have a subject surrounded by a relatively uniform background and I would like to be able to create a protection mask as an alpha layer and have photoshop apply the content aware scaling only to the background(to fill in the empty parts of the rescaled video) and leave the subject untouched.
What I've done is opened a video in photoshop as a layer, created an alpha channel to represent the subject(subject is white, background is black on the created alpha channel), changed the canvas size to the new aspect ratio which obviously created a tranparent frame around the original video frame. I then tried to apply content aware scaling to the video, it converted the layer to a smart object then displayed the free transform handles. However, when I selected my alpha channel as the protection area, the content aware scaling seemed to ignore it and went on to distort the entire frame. Now I tried this with still frame from the same video with the same mask/alpha channel and it worked as expected just didn't seem to do it with video.
The idea, if it would be possible to do this in PS, is to rotoscope the subject roughly in AE and generate a matte pass which can then be used as the accompanying alpha layer of the video so then the content aware scaling can be applied to each invidividual frame.
Is there a way to pick (16) hex bolt from the content center in any model and change the length of them all at the same time.
View 1 Replies View RelatedFor some reason when I start either the bolted connection generator or the shaft generator, the content center parts don't show up if I select "modify" to change the parts. For example: I wanted to create an axle with a retaining-ring-groove. I created the axle, and under Features I selected Retaining Ring.
Then a dialog shows up with some standard dimensions, and on the right under "Position" it says "ASME B 27.7M". When I click here, an empty dialogbox shows with filter "All" activated.
It should show all retaining rings available in the content center. The strange thing however is that when I exit this function and start the ordinary "Place from Content Center" command, I can see all retaining rings that are available (see pictures).
The same thing occurs when using the bolted connection generator.
Everytime i import a video clip into Adobe Premiere Pro Cs6 it automatically zooms into the video. How can i zoom out of the video,
View 9 Replies View RelatedIf is possible to se all video in preview but without video effects?
In Sony Vegas Software we can decide if we want to watch all our video normally or we can disable all FX by the 1 key and start to see without FX. It's very good if we have poor PC. For example, 1 screen is with FX, 2nd is without it and we select what we want to see:
Is that option in Adobe Premiere?
Is there any way to track select backwards, a la FCP7, in Premiere? I've tried all the modifiers but no luck. I'm guessing 'no but feel free to fill out a feature request'..
View 3 Replies View RelatedWhen I want to make a DVD in Premiere Pro I go to File/Adobe Dynamic Link - the Send To Encore does not show up...why?
View 3 Replies View RelatedHow to change Video Size !6:9 video to 4:3 in premiere pro
View 3 Replies View RelatedI'm using Adobe Premiere pro and I am doing a video for my work. I am trying to place a ticker on the bottom of the video that will be scrolling as the video plays but I can only do a small amount at a time. Is there a way to do one continous ticker that will play instead of having to type one part and then a seperate one and trying to match the same speed so they don't overlap?
View 8 Replies View RelatedAfter rendering a few clips in my timeline for playback, my video tracks are no longer playing back. The timeline time marker plays, the time counts, and the audio playback is working correctly, but the video stays on the frame in which playback started, and does not move change until pausing playback.
View 2 Replies View Related