I have a GTX 590 and a Geforce 7600GT graphic card installed in my system. Now, in the Iray Render Dialog it says that "No supported cuda devices detected".
I know that the GTX 590 IS a cuda device and is also a multi-gpu so that it should find 2 cuda devices on my system.
Cuda is installed and I use the latest drivers from nvidia "296.10".
Have downloaded the trial version for Photoshop CS6 and will start studing Photoshop next week and was therefore going to buy the program as well. However, I'm struggling getting it to work properly, a message shows up when I start Photoshop saying "Photoshop detected graphics hardware that is not sufficiently supported. I've done what they are suggesting, i.e. untick the "Use Graphics Processor" in the performance box but this make the 3D option not working at all.I've got Windows 7.
View 2 Replies View RelatedOk i have 3ds max 2013 student edition,with a amd quad 4 cpu,and i just bought this card URL...,it says it has 384 cuda cores,and i know it works because i used it with a video editing program,and ran some tests without cuda enabled and disabled it performed rather well,but when i try to use the iray render in max it says no cuda device found,and i have updated the drivers and all of that,what i need to know is in simple terms is my card compatible with max 2013 which is (geforce gt 640).
View 1 Replies View RelatedAre CUDA drivers ( NVIDIA GeForce GT 650M (CUDA) ) support 3D for PS CC?
View 6 Replies View RelatedI have a NVidea Quadro FX 1800 card. The NVidea Control Panel information shows 64 CUDA cores(screen grab attached). Yet the iRay message window shows 0 CUDA cores (screen grab attached).
how I can get the iRay Renderer to use the CUDA cores on my machine?
I have VideoStudio Pro X5 Ultimate (full paid for version) but I am unable to select the 'Enable Hardware Encoder Acceleration' option under Preferences/Performance as the option is greyed out.
I have an nVidia GTX660 Ti 3GB made by EVGA. This has a CUDA based CPU and according to Corel's advertising, VS Pro X5 is designed for this chipset, and so I cannot understand why the option to enable it is not available.
Some comments from Corel support I found that this option isn't required for CUDA cards as they are enabled and used by default. However, I have just done a test render of a 1920x1080 AVI clip to MP4 using H.264 and monitored both my CPU (dual Xeon E5420) and GPU utilisation. The CPUs hit 90% whilst the GPUs sat there doing nothing at all other than basic screen rendering rather than any encoding. Corel's comments are incorrect.
Also, I have a support case open with Corel but TBH, I don't hold out much hope as their last response was "If the hardware acceleration options are greyed out, then your graphics card software is managing the hardware acceleration. Please check with Nvidia whether there is an option to disable this. If there is, then once it is disabled, the hardware accelerations option will become active again.". Now, I don't pretend to be an expert in these matters, but I was under the impression that the hardware was enabled and managed by the drivers, and those drivers also offered out the functions of the card to other software that required it (API?), such as VS Pro when it needs access to the hardware acceleration to encode video. Graphics rendering on games works fine without me having to disable any graphics card software so why doesn't VS Pro?
For info, my hardware / OS is as follows:
Dual Xeon E5420 CPUs at 2.5Ghz (8 cores in total)
16GB RAM
EVGA nVidia GTX 660 Ti 3GB (with 310.61 beta drivers but still same issue with 306.97 release drivers)
240 GB Kingston SSD
Windows 7 64bit Ultimate with SP1
How to get hardware acceleration enabled using a GTX 600 series card? Or any other card that initially had the option greyed out?
I know that some people say that CPU rendering gives better quality, but I have a few hundred hours of old VHS and Video 8 tapes to transfer to digital and burn to DVD so as the quality isn't great to start with, I'm not too concerned about a few artifacts if I can significantly reduce the rendering time.
If I can't resolve this issue then I am going to claim a refund under Corel's 30 day money back guarantee as the product doesn't perform as advertised. However, I'd prefer to get it working as I quite like it.
Is there any solution to enable CUDA for AMD Radeon HD 6970M?
View 3 Replies View Relatedon my system Premiere Pro CC is only using GPU rendering with AVI output formats.
All other formats like MPEG2, Quicktime, H.264 are unfortunatly fully CPU rendered (=slow).
I just upgraded from trial to payed mode and when Premiere started the CUDA was already enabled (might have activated it during trial already).
But anyway I checked if my card was in the support txt file and also used the cuda.zip auto tool to make sure I had no typo.I did this for Premiere Pro CC and also copied the list into the Adobe Media Encoder directory.
So I started playing with input and output formats. It turned out that CUDA is currently only working with AVI output. I installed GPU-Z to check my GPU usage vs CPU usage in the task manager.
As soon as I pick any other output format than AVI - CPU usage during rendering is up to 80-90 and GPU at 0%.
With AVI output GPU ist around 30 and CPU in the 40ties or less as it should be.One of my old applications Cyberlink Power Produces 11 is doing the h264 rendering in half the time.
My System is running on:
Asus P8Z77-V Deluxe with 16GB Ram
Nvidia GeForce GTX 660 Ti (with current Driver - 332.21 )
Windows 8.1 Pro 64-Bit (with Media Center) and latest updates
Current entry in CUDA*.txt file (as printed by Adobe GPUSniffer):
GeForce GTX 660 Ti
And already tried:
GeForce GTX 660Ti
GeForce GTX 660
I know it works in CS6, still have that installed. I don't get it, it's listed as a supported card in the CC spec. I have the lastest CUDA/Driver installed.
View 8 Replies View RelatedI've been using AE CS6 on Mac OS 10.7.4 upon release and updated to 11.0.1 when it was released as well, so for a while, but just today I started to get this warning-
"Ray-tracing on the GPU requires CUDA version 4.0 or later. Ray-tracing will use the CPU until you install the latest supported CUDA driver."
I am running a supported Quadro 4000 with the latest CUDA driver, 4.2.7, and about the only thing I know of that I have installed recently was the update for SpeedGrade today. Why I'm now getting the warning?
I am working with MTS files (AVCHD, 1920x1080, interlaced, 25 fps) in Premiere CS 6, Windows, and want to render my project with the same properties as h.264.
[URL]
A common misconception is that CUDA/OpenCL processing is only used for rendering for previews. That is not true. CUDA/OpenCL processing can be used for rendering for final output, too.
But where/what are the options/settings to use CUDA not only for preview purposes, but for accelerating the rendering of the final output, too?
I have tracked this problem with different versions of everything but can't seem to zero in on a cause. This problem seems to randomly occur when I start up After Effects with other apps already running. I haven't isolated every scenario because sometimes it works, other times it doesn't, and still other times I don't need ray-tracing anyway.
If I then go about clicking things off and re booting, etc, it will eventually work. This past time I started AE after I already had Photoshop and Premiere Pro running. Safari, Outlook, Power Point, a couple of Finder windows and VLC player were also running. After I closed everything and then started AE first, it recognized my CUDA drivers and card.
Then I re opened everything I had open before ... loaded them full of content, went about the business of editing, ray-tracing, rendering, etc. with no issues.
I guess I should be happy with a solution that depends on the order in which I open applications and I am certainly glad there seems to be a work around (albeit a workflow stopper). Are there settings in my other apps that are blocking AE's ability to recognize CUDA? A conflict with VLC player?
With a relatively new iMac, gobs of RAM (some say is way more than needed), a fancy subscription to Adobe Creative Cloud with timely updates, I'd like to get into that comfort zone where everything just works.
I'm experiencing an interesting issue in Premiere Pro CC. When using Mercury Playback Engine with either CUDA or OpenCL acceleration, the SDI output from my Blackmagic Design Decklink Extreme 3D+ card exhibits a noticable gamma shift towards the dark. When I switch to Software Only playback, the image appears as it should. The image in the viewer window inside Premiere is not affected in any way, just the SDI output. I've confirmed this behavior at multiple frame rates, resolutions and codecs, including ProRes, XDCam and RED. The "Linear Processing" checkbox in sequence settings makes no difference.
It makes the MPE acceleration unusable, and Premiere is very slow without MPE.
i have installed a NVIDIA GeForce GT 610 but the GPU is NOT Detected in After Effects cs6
View 1 Replies View RelatedPRODUCT: ps cs5
printer: epson profession v500 photo scanner.
VERSION: 12.0
os: mac os 10.8.2 (64 bit)
Printer not getting detected:
Solution: run Photoshop CS5 in 32-bit mode:
1. Quit Photoshop CS5.
2. Navigate to Applications/Adobe Photoshop CS5 folder.
3. Select the Adobe Photoshop CS5 application file.
4. Choose File > Get Info.
5. Select "Open in 32-Bit Mode".
6. Close the Get Info dialog box.
7. Restart Photoshop CS5
When I start photoshop and check the perfomance settings, it shows intel HD Graphics Family as the gpu and in advanced settings, openCL is grayed out. Is there any way to get photoshop to use the nvidia gpu? My specs are below.
Dell XPS 15z - i7 2640m - 16gb ram
video: Nvidia GT 525m with 2gb
Windows 7 x64
Photoshop CS6 Extended
I've got all the drivers updated to the latest. I've gone into the nvidia control panel and changed the preferred graphics processor to NVIDIA and set program itself to use nvidia. Don't know what else to do.
I upgraded to Photoshop CC 14.1 Mid 2009 Macbook, 10.8.4 6GB ram/NVDIA 9400M GPU 236 MB ram.
When I launch PS by itself, my GPU is detected. If I double click on a file, there is a delay in opening and I get this message:
All my OpenGL functions are disabled. So now what can be done to get my GPU working as it did in 14.0?
I'll guess I'm out of luck since NVDIA doesn't issue updated drivers for my GPU.
Trying to use Nikon D50 with Lightroom. D50 can´t get detected by LR. I´ve already switched the camera to PTP and RAW picturequality. What now?
View 6 Replies View Relatedcamera not detected with lightroom5
View 1 Replies View RelatedI used PS and an Epson 1650 scanner for many years. Bought a new Win 7 64 bit computer recently and installed CS 6 Extended . Now, when I try to import from the scanner I get the error msg: "No WIA compatible devices were detected."
View 1 Replies View RelatedSo what is a good reliable capture device that works with X3 and won't mess up on me? I've looked at ezcap, the real one, and I'm still not sure. BTW it has to be USB as I use my laptop.
View 10 Replies View RelatedI was just working on a Photoshop document and I wanted to view in actual size and thought I'd use a shortcut. I tried the F7, but that had no effect. Then I tried (or thought I tried) a shortcut that works with other Adobe products. But what I pressed was, I think, Command+1, which turned my document into what appeared to be black and white but what I think was just the red channel. "Undo" and "Step Backword" did nothing. I don't work with channels and it took me a while to figure out how to see all my colors again. One of the things I tried was to change the mode from 8 bit to 32 bit. Now my doc is ready but I can't save it for Web and Devices. I tried going back and changing it back to 8 bit color, but it says if I do that it will merge all my layers and I don't want to do that. Any ideas? It's so annoying. All I did was accidentally press the wrong shortcut and now it seems like I am going to have to start the whole project from scratch.
View 1 Replies View RelatedI have sliced all my pieces in PS. I then went to Save for Web and Devices. For some reason my slice tool cannot be grabbed (I click on it and it doesn't turn to slicer). Also, the color table is all gray. No colors. I am going nuts! I have tried everything to make them appear.
I am taking a DW class (didnt know I had to have extensive knowledge in PS first, so now learning both programs for school), and my project was due last night. I need to hand it in Thur night but I can't do the things I need to in order to get it ready for DW.
I have done this before many times without a hitch.
I am using a psd format that I designed. It is no more complex than others I have done. It is small, just a horizontal navbar about the size of the one on Apple's website.
I tried exporting it, flattening it, slicing it removing the slices.
I think it is a problem with the application itself.
I have tried repairing my permissions, restarting, and holding Cmd, Opt, Control, Shift during PS startup to reset the settings.
I am trying to shell a multi-layered part that has been union boleaned to form a 3D solid. Once I hit shell, eliminate one face for 3D printing, set the thickness desired, command line reads "Non-manifold edge detected" and restarts the shell command. 1.) What is a non-manifold edge and 2.) How do I fix it?
View 1 Replies View RelatedMy Camera is not detected using LR4.0 and LR4.1 on my laptop.chatted with Adobe online and did all he/she asked with no luck.Also have done all on the trouble shooting stuff on the Tethering support page.The camera will tether on my desk top computer but not on my Laptop..
View 1 Replies View RelatedLightroom 5.3 on my new HP laptop with Windows 8. LR shows no camera detected. My Nikon D7000 operates in PTP USB mode only. Windows 8 is detecting it as a MTP USB device. How do I get Windows 8 to load the PTP driver when I connect my D7000 so I can shoot tethered in LR?
View 1 Replies View RelatedI am trying to tether the camera to Lightroom3 to no avail. I am operating under windows 64 bit edition and using the Nikon D90 with a usb cord. The lightroom version I am using is 3.6. I have downloaded other programs and shot tethering fine but they don't have the features Lightroom has to offer so they fall short. Windows also detects the camera itself but lightroom does not. The Nikon plugin is also on.
View 11 Replies View RelatedI was turning a mov. file into a gif. When I was finished I went to save for web & devices and after it finished loading... the gif couldn't be seen but a coral pink box took the space. Then I get a message stateing that Adobe CS5.1 is not responding... Then it closes down the program. I'm able to make other gifs. Even ones with more frames.They all turn out to be fine. It's just this certain one I try to make that always ends up closeing down the program. The file size is 248MB and the gif I'm trying to make only needs 91 frames. I even used the same mov. file and made a different gif from it and it worked perfectly! I've tried reinstalling but that didn't fix anything.
View 1 Replies View RelatedWhen hitting saving for web and devices, Photoshop starts to render images but before it's done, it crashes. I get an error-popup with no text and the screen where normally the animation is shown is red. Then Windows comes with a crash report and I can only quit Photoshop. I have an animation of over 150 frames, but just some black and white lines, no color. I'm using Photoshop CS 5.5 on Win7.
I tried deleting the preferences in AppData/Roaming etc, but no result, still crashes.My Photoshop is also updated to the latest version.
When scanning a paper with an external USB scanner I use File->Import->WIA support.But for some reason I always see multiple scanners in the list of icons, although I only have one scanner connected.
It seems like there is an icon shown for each USB port the device once was connected on, but I never know which icon is routed to the USB port the scanner is connected now.The 'wrong icons' throw an error message, so I always have to test all the icons until I found the right icon.