I am trying to shell a multi-layered part that has been union boleaned to form a 3D solid. Once I hit shell, eliminate one face for 3D printing, set the thickness desired, command line reads "Non-manifold edge detected" and restarts the shell command. 1.) What is a non-manifold edge and 2.) How do I fix it?
View 1 RepliesLets say, I have an Extrude feature built on a Rectangle as Sketch Profile. Is it possible to programmatically edit that Sketch, add one line in the middle dividing the Rectangle and replay the Extrude, so that I get Rectangular solid and a Partition surface in between?
This was not possible as a user, but programmatically if its allowed to turn ON some Non-Manifold flag and allow this. If allowed, this probably may not be a single Extrude feature doing both Solid and Surface, but could split into 2 Extrudes.
Whenever a annotative dimension is selected, its text are displayed with virtually all possible scales simultaneously on the screen, blocking the view of other objects and make the screen all a mess. Have a look at the attached picture.
Is there a way to get rid of it?
txt.png
I am having trouble shelling a part I have designed. Every time I try, with no matter what thickness, I get the following message:
"The attempted shell operation had non-manifold inputs. Try with manifold inputs."
I want to calculate the total external surface area of the attached manifold. When I use the iProperties tool, it give me the surface area including internal surfaces of tubulars etc.
View 1 Replies View RelatedI've been using cad for a while but only for simple layout drawing for parts I need made.
Autocad 2010 I want to set up a drawing to draw some manifold adapter plates in millimeters. I can set it up for inches but I'm having a problem setting up for mm. I start a new drawing and select the template initial setup-manufacturing-metric.dwt In drawing unitDecimal and precision is set at 0.000 Units is set to "millimeters"
I draw a circle to test it. I draw a circle of 5 radius. Should be a circle 10mm in dia, correct? But it is huge, my guess is that it's 10 inches. I'm basing the size on what is printed out when I set my print to no scaling, 1:1, plot window. The same as I have for all the drawings I do in inches.
Second question.
How can I get circle centers to show on prints without actually drawing them or putting in dimensions?
when i open dwg file. message shown , plot stamp detected.and when i give plot drawing print with message " PRODUCED BY AN AUTODESK EDUCATIONAL PRODUCT"
I dont want this message on ploting drawing.
I have been getting this error message alot with 2013. I never got this before with previous versions. I do alot of assemblies that are made of parts that are derived from a main sketch part. The only way to remove the error is by deleting the right part out of the assembly and I can procede. I have read that it has something to do with renaming parts, but I still dont completely understand how I am getting this error. My work flow is the same.
Dell t1500 i7 8 gb ram
Windows 7 64 bit
ati firepro v4800
I have been working for the last couple of hours "copying objects" into my part file. I am creating composites from surface data that exists in other part files. I now cannot save my part which I have renamed TEST.IPT for the purposes of this request. This is a common workflow for me when I am recreating a part from multiple imported CATIA files. (I know it is hard to guess withour providing the actual data.)
Problems encountered while saving the document.
Error(s) detected while writing segment PmDCSegment in database TEST.IPT
Error detected while saving object of type MIxTransactablePartition in TEST.IPT
Error detected while saving object of type MIxPartition in TEST.IPT
The attempted write operation did not succeed. Part file may be corrupt.
The database in TEST.IPT could not be saved
Just upgraded to 2013 about a week ago. Random part files seem to be giving me the same error message "A cyclical constraint dependency has been detected." Some of these parts are ones that worked fine in 2012 and some are ones that I created in 2013 and worked fine for a while, but then started giving me the error later on.
View 9 Replies View RelatedCurrently I've got code that is failing when I try to run StartTransaction() using the TransactionManager. I keep getting a InvalidProgramException.
Is this due to me not actually having AutoCAD installed on my development box? I do have references to AcDbMgd and AcMgd loaded in my project if that makes a difference.
I have created a load of blocks and added them to a tool palette. Whenever I click a block to insert it I get this message ' This application has deteted a mixed version of AEC objects participating in this operation. New AEC objects will be disallowed from participating in this operation'
how do I remove it. I'm looking at sharing these blocks with all our users and could do without this message appearing whenever they click them.
What is probably a fairly basic 3d Modelling operation. I have a series of planar surfaces arranged to create a relatively basic object. I am now trying to use the sculpt command to convert these into a 3d solid but keep getting the error message;
"Modeling Operation Error: Operation did not add or remove material. Solid creation failed, no watertight volume detected."
Is there any way of;
A. forcing the sculpt command to work through altering some sort of fuzz distance option etc?
or failing this
B. identifying the non compliant sufaces involved so I can attempt to tweak them to suit?
I am trying to create different bend tables for different thickness material. If I have two radii that are the same for different thicknesses it gives me an error message on the second one that it is a duplicate column heading value. The values of the bend table are dependent on the thickness of the material. Why can't I have several different thicknesses with the same radii?
View 1 Replies View RelatedIn the column Description from a I-assembly table I will place the text Test<200. Than I get a error message "Detected potentially damaging errors in the table. Unable to interpret cel: " ". It goes wrong with this symbol <. How do i get this symbol normal as a text in this column?
View 5 Replies View RelatedHere in my office we have several pc's running Inventor 2012 and we found out that when a network license is unavailable (the number of licenses is exceeded) then Inventor loses some of its configurations on OPTION window. The fields that are erased and put back to default:
- "General" Tab >> "Load VBA on start-up" is set to false;
- "General" Tab >> "Update physical properties on save" is set to false and "Parts and Assemblies" is unchecked;
- "File" Tab >> "Default VBA project" is set back to default;
- "Contet Center" Tab >> "Location of Libraries" is set to default
- Customized buttons on Ribbonbar loses its icons and we have to recreate them everytime it happens.
have a fix and a new implementation for the new versions to come?
i have installed a NVIDIA GeForce GT 610 but the GPU is NOT Detected in After Effects cs6
View 1 Replies View RelatedPRODUCT: ps cs5
printer: epson profession v500 photo scanner.
VERSION: 12.0
os: mac os 10.8.2 (64 bit)
Printer not getting detected:
Solution: run Photoshop CS5 in 32-bit mode:
1. Quit Photoshop CS5.
2. Navigate to Applications/Adobe Photoshop CS5 folder.
3. Select the Adobe Photoshop CS5 application file.
4. Choose File > Get Info.
5. Select "Open in 32-Bit Mode".
6. Close the Get Info dialog box.
7. Restart Photoshop CS5
When I start photoshop and check the perfomance settings, it shows intel HD Graphics Family as the gpu and in advanced settings, openCL is grayed out. Is there any way to get photoshop to use the nvidia gpu? My specs are below.
Dell XPS 15z - i7 2640m - 16gb ram
video: Nvidia GT 525m with 2gb
Windows 7 x64
Photoshop CS6 Extended
I've got all the drivers updated to the latest. I've gone into the nvidia control panel and changed the preferred graphics processor to NVIDIA and set program itself to use nvidia. Don't know what else to do.
I upgraded to Photoshop CC 14.1 Mid 2009 Macbook, 10.8.4 6GB ram/NVDIA 9400M GPU 236 MB ram.
When I launch PS by itself, my GPU is detected. If I double click on a file, there is a delay in opening and I get this message:
All my OpenGL functions are disabled. So now what can be done to get my GPU working as it did in 14.0?
I'll guess I'm out of luck since NVDIA doesn't issue updated drivers for my GPU.
Trying to use Nikon D50 with Lightroom. D50 can´t get detected by LR. I´ve already switched the camera to PTP and RAW picturequality. What now?
View 6 Replies View Relatedcamera not detected with lightroom5
View 1 Replies View RelatedI have a GTX 590 and a Geforce 7600GT graphic card installed in my system. Now, in the Iray Render Dialog it says that "No supported cuda devices detected".
I know that the GTX 590 IS a cuda device and is also a multi-gpu so that it should find 2 cuda devices on my system.
Cuda is installed and I use the latest drivers from nvidia "296.10".
My Camera is not detected using LR4.0 and LR4.1 on my laptop.chatted with Adobe online and did all he/she asked with no luck.Also have done all on the trouble shooting stuff on the Tethering support page.The camera will tether on my desk top computer but not on my Laptop..
View 1 Replies View RelatedLightroom 5.3 on my new HP laptop with Windows 8. LR shows no camera detected. My Nikon D7000 operates in PTP USB mode only. Windows 8 is detecting it as a MTP USB device. How do I get Windows 8 to load the PTP driver when I connect my D7000 so I can shoot tethered in LR?
View 1 Replies View RelatedI am trying to tether the camera to Lightroom3 to no avail. I am operating under windows 64 bit edition and using the Nikon D90 with a usb cord. The lightroom version I am using is 3.6. I have downloaded other programs and shot tethering fine but they don't have the features Lightroom has to offer so they fall short. Windows also detects the camera itself but lightroom does not. The Nikon plugin is also on.
View 11 Replies View Relatedi have had this error for since over a couple of months and i have been udated my graphics card to the latest beta versions.this is what my graphics process settings show URL....
- AMD radion hd 6000 series
-URL.....
it only crashes when i switch tools.
I am using photoshop cs4 and was just wandering if this version still has the ability to preview a still image of what you are working on via firewire output? I know you could in other versions but I do not see it anywhere under the file/export menu. I have a device conected and it works fine with Premiere and After effects but I do not see it show up in Photoshop. Anything I need to setup to make this work?
View 1 Replies View RelatedI'm having one really annoying problem and that its that gimp is not re-sizing the size of brush accordingly to the pressure level it just changes the opacity from low to 100%. I tried going to preferences and configuring but it resets back to previous state and in photoshop tablet works fine.
Tablet is Genius MousePen i608X
Windows xp service pack3
I used PSE11 before and i use a scanner (canon 4200F) to import some old pictures and other documents. Now i have installed PSE12, but i was surprised that my scanner is not detected, so i cannot import anymore with my scanner.
View 13 Replies View RelatedSetup:
Windows 7 Ultimate 32 Bits
Lightroom 3.3(just updated to the latest version)
Nikon D700 / D3s (supported according to this)
Problem:
When I connect any of my cameras (D700 / D3s) to my computer and fire up LightRoom and try to do a Tethered shooting, I get a "No Camera Detected" on the tethered shooting bar.
Notes:
- The cable works and the Windows driver works as my cameras are detected by Windows, show up in the devices list and I can browse the CF card content from the computer, so it is not a cable problem. It might be a driver issue with lightroom...
- USB Mode: the D700 and D3 series only have PTP mode, no USB Mass storage (MSC Mode), so suggestions to turn on USB Mass Storage mode are just not going to work.
- Both the D700 and D3 are listed as compatible cameras for tethered shooting in Adobe release notes