Currently I've got code that is failing when I try to run StartTransaction() using the TransactionManager. I keep getting a InvalidProgramException.
Is this due to me not actually having AutoCAD installed on my development box? I do have references to AcDbMgd and AcMgd loaded in my project if that makes a difference.
Since today, I get the error mentioned in the subject when trying to open Corel Draw X5 (part of Suite X5). Running on WinXP. No previous problems. But I do think that it recently installed an automatic update.
I tried Repair (via Control Panel), but it did not work.
Runtime error P6025 pure virtual function call on Program.
View 1 Replies View Relatedi just downloaded and registered xdpx9.2.1 (launch).
when i launch 'create panorama' i get the popup 'Panorama Studio program has been detected. Do you want to use the standard built-in panorama stitching feature or launch Panorama Studio*?'
if i click 'panorama studio' i get the following error this is a completely native clean install of xdpx9 so a re-installation of the program isnt going to fix anything especially since i had exactly the same problem with xdpx8
All of a sudden, Photoshop Elements 9 has stopped working. I receive a "runtime error" message and the program closes. Do I need to do a reinstall?
View 1 Replies View RelatedI have been using this program successfully for sometime but today program won't open because of a runtime error.
View 9 Replies View RelatedI bought my PaintShop Photo Pro X3 on June 13, 2011, but when I installed it, the language in my program is Spanish, I want my program in English. How I can change de language in it?
View 3 Replies View RelatedI would like to know how to change program language from danish to English - in Creative Cloud single-app membership Photoshop (one year)?
View 1 Replies View RelatedIs it possible to switch language - from English to Swedish without uninstalling the program and start anew?
View 5 Replies View RelatedI have 2 different lines defined with x and y coordinates.
I want a third line that uses the common x coordinate and a y coordinate that is the sum of the two coordinates.
If this is possible, can i define which mathematical function i use so that i can add/subtract or even use a formula to define?
Further Notes:
The example above is very simple. I have 2 complex curves that go into positive and negative values of y (speaking from a mathematical perspective). I need an easy way to intersect the complex curves at a specified interval and add them at each of those intervals.
For example i may a sine function going in between pi and -pi over a distance equal to 2. I then need to split the curves in intervals of 0.1 and add them together.
I have a lot of tools with separate installers. But the ribbon- panels merge in one ribbon-tab.
View 4 Replies View RelatedI love the concept of sheet sets, particularly when printing project drawings in one stroke. But my current understanding is that a drawing can only be associated with one sheet set. Most of my projects include drawings common to all.
View 0 Replies View RelatedI was wondering how to combine common subassemblies so you don't have to seperately count them.
I realize the long way around this is avoiding subassemblies in general and linking a circuit drawing with a predefined additional MAN, CAT in the drawing of the subassemblie(s). This also allows me to annotate the subassembly Footprints. I havent seen an easy way of auto inserting subassemblies and linking common subitems to make a unique item number. The above is all I get when linking subassemblies through the databases (which also doesn't allow you to annotate/ insert the subassembly footprints). I must be missing a way to auto insert the subassembly Footprints . . . creating unique drawings with the subassembly Footprints is time consuming.
If I type in refedit, wipeout, match properties, properties and quite a few others my command line reads Not Recognized! I can't live withour these comands! Not sure what I did, it happend yesterday and I was getting hit by all sides.
Added note: it doesn't seem to mater how I try to get to these commands i'm equally hosed if I use short cut, spelled out, on the ribbon, right click. . . . .access denied.
I still have use of line join edit etc.I don't know if this is related but 2012 dosn't seem to remember settings like if you check the double click to edit in options save work space after the next day it is back like it was.
I run the AutoCAD 2013 student version on Windows 7. I have rather little in-depth knowledge of AutoCAD and its countless parameters whose values seem to control the general settings. This is probably the issue of yet another one of those parameters.
Just yesterday as I was drafting on my laptop all of a sudden these annoying constraints started to appear all around. I somehow switched them off but ever since then, whenever two objects share even a point (or a line, for that matter, as this is simply a multitude of points), they seem to be "glued" together at that point - if I select one of the objects and try to move it, scale it, drag the shared point around to model the object ect., the other object (the one it's glued to) is skewed about that particular shared point (or line) so that it keeps being a common element of both. I figured that I have somehow told AutoCAD to regard this as some sort of constraint but how I did it or how to undo it. I tried CONSTRAINTINFER, which was set to 1, and changed it to 0, bu to no effect.
I am trying to shell a multi-layered part that has been union boleaned to form a 3D solid. Once I hit shell, eliminate one face for 3D printing, set the thickness desired, command line reads "Non-manifold edge detected" and restarts the shell command. 1.) What is a non-manifold edge and 2.) How do I fix it?
View 1 Replies View RelatedHow to change the default display settings for the common drafting aids(INFER, SNAP, GRID, ORTHO, POLAR, OSNAP, 3DOSNAP, OTRACK, DUCS, DYN, LWT, TPY, QP, SC) that are in the lower left corner of acad? when I open acad they are defaulted to icons. I'd prefer if the default display was to use the text descriptions noted above.
View 2 Replies View RelatedI have two lists with lists inside:
((A) (A) (A) (B) (B) (B) (B) (C) (C))
and
((A 1) (A 2) (A 3) (B 1) (B 2) (B 3) (B 4) (C 1) (C 2))
I just want to make a list with lists that is:
((A 1 2 3) (B 1 2 3 4) (C 1 2))
I am guessing map car and lambda should come into play but i can't figure it out.
Looking for 2012 sheet metal template with all the common plate sizes already in the rule?
View 6 Replies View Relatedwhen i open dwg file. message shown , plot stamp detected.and when i give plot drawing print with message " PRODUCED BY AN AUTODESK EDUCATIONAL PRODUCT"
I dont want this message on ploting drawing.
How to call AutoCAD Command with .net C# on runtime?
For Example,
After opening my Drawing File thro. .net C#,
acApp.ActiveDocument.Application.ZoomExtents();
I need to use the AutoCAD command Oleopen
acApp.ActiveDocument.BeginCommand.oleopen();
Here is some error.
Normally how to use the AutoCAD commands with .net C# programming.
I have been getting this error message alot with 2013. I never got this before with previous versions. I do alot of assemblies that are made of parts that are derived from a main sketch part. The only way to remove the error is by deleting the right part out of the assembly and I can procede. I have read that it has something to do with renaming parts, but I still dont completely understand how I am getting this error. My work flow is the same.
Dell t1500 i7 8 gb ram
Windows 7 64 bit
ati firepro v4800
I have been working for the last couple of hours "copying objects" into my part file. I am creating composites from surface data that exists in other part files. I now cannot save my part which I have renamed TEST.IPT for the purposes of this request. This is a common workflow for me when I am recreating a part from multiple imported CATIA files. (I know it is hard to guess withour providing the actual data.)
Problems encountered while saving the document.
Error(s) detected while writing segment PmDCSegment in database TEST.IPT
Error detected while saving object of type MIxTransactablePartition in TEST.IPT
Error detected while saving object of type MIxPartition in TEST.IPT
The attempted write operation did not succeed. Part file may be corrupt.
The database in TEST.IPT could not be saved
"Could not load file or assembly 'acmgd, Version=17.0.54.0, Culture=neutral, PublicKeyToken=null' or one of its dependencies. The system cannot find the file specified."
This is the error i recieve, i've already referenced the dll from local installed folder, and made local copy as false. but also i recieve this error...
in iParts factory I would like to create part ## by setting common name and adding to it different values drawn from part parameters.
Please refer to attached image – common name in that example would be “DRILL” and description of the diameter and length automatically taken from parameters in columns “DRILL_D” & “INSERT_L”.
Just upgraded to 2013 about a week ago. Random part files seem to be giving me the same error message "A cyclical constraint dependency has been detected." Some of these parts are ones that worked fine in 2012 and some are ones that I created in 2013 and worked fine for a while, but then started giving me the error later on.
View 9 Replies View RelatedI'm trying to export my iam file to a 3D DWG file. When I do, I get the following error:
Runtime Error!
Program: C:Program FilesAutodeskInventor 2012BinInventor.exe
This application has requested the Runtime to terminate it in an unusual way. Please contact the application's support team for more information.
The loaded file is a .dll written in Visual Basic.NET using Visual Studio 2010.
NETLOAD Cannot load assembly. Error details: System.BadImageFormatException:
Could not load file or assembly 'file:///C:Documents and SettingsdanMy
DocumentsVisual Studio
10ProjectsClassLibrary1ClassLibrary1objx86ReleaseClassLibrary1.dll' or
one of its dependencies. This assembly is built by a runtime newer than the currently loaded runtime and cannot be loaded.
I got this error opening a .dwg in C3D 2012.
Win 7 Enterprise SP1 64 bit
Intel i7 3770 @ 3.40 GHz
16 GB RAM
Civil 3D 2012 SP2
I have created a load of blocks and added them to a tool palette. Whenever I click a block to insert it I get this message ' This application has deteted a mixed version of AEC objects participating in this operation. New AEC objects will be disallowed from participating in this operation'
how do I remove it. I'm looking at sharing these blocks with all our users and could do without this message appearing whenever they click them.
I'm trying to create a routine that enables the user to change the iProperties on an assembly through Apprentice. I had a sample file that was working last week but when I ran it again I suddenly have a runtime error -2147467259 (80004005). Here is the sample below:
Private Declare Function GetOpenFileName Lib "comdlg32.dll" Alias "GetOpenFileNameA" (pOpenfilename As OPENFILENAME) As Long
Private Type OPENFILENAME
lStructSize As Long
hwndOwner As Long
[code]....