3ds Max :: Move Icon Only Shows While Hovering Over Selected
May 23, 2012
In previous versions of Max, if you locked an object and were in the Move command, the move icon would show up no matter where you were in the viewport. Now, even if the object is locked, it will only show up while hovering over the object. My question is, was this intentional, or is there a way to turn it on and off? For my workflow this is a highly annoying change. I work without gizmos on. I only use axis constraints and I lock everything before I move it. I can still move things from anywhere in the viewport if the selected object is locked. The problem is that I can never tell that things are locked because the way of knowing (move icon always on) is now gone. I can always look down at the lock icon, but getting used to this is proving difficult.
As I move the Selection tool over a path I see what looks like a white anchor point that moves along with the selection tool as I hover over the path, however, there are not anchors other than the beginning and ending of this path. Are these anchor points or something else?
When hovering over icons, such as the “Constrain” function, the helper graphic appears over top of my product tree. After the graphic is finished playing it doesn’t go away. I can’t select anything in my tree structure that is behind the graphic and when I try to select the “I” (New, Save, Etc), I can’t select anything from that menu dropdown which is under the icon either.
I’m running Windows 8.1, and I’m using a trial version of Autodesk Inventor Pro 2014.
In Microsoft windows 7 Ultimate 64 Bit when PDF is created in Coreldraw X6 64 bit PDF Icon dont shows Thumbnail on Desktop. I can see the thumbnails from other's PDF
I'm trying to zoom a photo by right clicking but the zoom icon shows only in some areas of the picture (mostly on the left side). Everywhere else, right click takes me to the next photo?
I'm currently having diffulties editing my selections, specifically lines, hatching etc through the properties command. When I select a polyline or hatch and then select properties it shows that there is no selection. However if I select text I can edit the text style, but I can't change the colour. I've tried to change back to the default settings but that hasn't work.
Just starting to use 2014, and so far not so good. I tend to keep the Properties Palette open and docked. In 2014, if my current layer is 0, any object I select in a drawing shows as Layer 0 in the Design tab of the Properties palette. If I change to a different layer, any object selected shows that layer in the Properties palette. If I start a new drawing, enter WALLADD and draw a wall segment, the A-WALL layer now correctly appears in the Layer Manager, but when I select the wall, the Layer in Properties is the current layer, not the A-WALL layer it should have gone on. Also, Quick Properties is on, but doesn't pop up anywhere.
1) How do I get the ucs Icon (X,Y axis) to not move when I zoom in and out. I want it to be stationary in the bottom left corner as I'm used to seeing it.
2) For some reason I cannot peform the simple task of drawing a line by picking a point and then entering a distance. Ever since I've been drafting with cad I have been able to type "line" in the command line and then am asked to "specify first point" (I do so), and am asked to "specify second point" (which I do). Normally I do this in ortho mode (0, 90, 180 etc.) For example, using 25', I lead the cursor to the right as my "second point", and the line normally shows up 25' to the right. This is not happening now for some reason. After I specify my second point as 25', the command linen states, "point or option keyword required" and does not draw the line. I'm sure the solution is an easy one but I've never seen this happen before.
Once i have 'selected by rectangle' and copied its innards how then can i move rect-image to where i want to place it? I am used to just clicking the 'pointer tool / move tool', and move it.
THERE I'D LIKE TO ASK ABOUT CUTTING ... SO I'VE DONE THE SCISSORS THING ,CLOSED THE SELECTION AND IT APPEAR IN A FRAME , HOW DO I MOVE SELECTED AREA ? ALSO HOW TO MAKE THE FRAME ITSELF DISAPPEAR ?
I cannot move anything I select. I try to drag it and it makes the "bump" noise.
-I made sure that my preferences are not set to "object selection by path only".
-I've restarted my computer several times
-I tried to open a previous Illustrator file and I have the same problem
-I even uninstalled and reinstalled my entire Abode Suite beacuse I've been having several issues
I'm not sure if this is related but I also can't create a new document unless I use picas and CMYK coloring. It refuses to adjust to anything other than the default settings. Also, I can't increase the stroke of an object unless I type in the number, meaning I can't use the arrows for adjustment.
My CorelDRAW has just developed a glitch - I can select objects but not move them (other than by using the nudge button) and if I click twice on the object it doesn't change the nodes to allow me to rotate - weird and seriously difficult to do any work in the programme. I've tried turning the computer off and on again and have tried the default setting.
On a new transparent layer, I have drawn a straight line with the pencil tool. I select the Box Selection tool to select the whole line that I just drawn. I switch to the Move tool and made sure to move just the selection.
At this point, I would think that I would be able to move the line but only the box that is shown by the Box Selection tool moves. The line doesn't move at all. However, when I tell the Move tool to move the selected layer, the whole canvas moves, including the line. Why can't I just select just the line and move it?
I find the crop tool in CS6 to be such a pain compared to the version in LR4. When using the mouse (in CS6) to reposition the crop area the box hops around and seems to "jump" into certain positions - this is especially pronounced if it gets close to an edge.
I realize I can reposition with the arrow keys but I was wondering if there is a way to disable the "jumping" while using the mouse?
My rotate tool in maya seems to be "locked" i can't freely rotate whenever i left click hold the center and it only rotates where my viewport is looking at so if im at the X axis I can't rotate the Z axis. Tried setting my preferences to default and nothing. I've also set my rotate tool to default.
Whenever I move my camera say to the Z axis the Z handle gets selected and same when I move the camera to the X axis.
I have tried using the hot grips selection by holding shift, but some of the grips are overlapping and I can only select the top most grip. It is also a slow process because I must click each individual grip that I want to move as a whole. Is there a way of selecting multiple grips at once including grips that are beneath others?
If I right click on on the shape tool and try to select any of the choices nothing happens, the menu keeps showing. I also can't move any layers anymore using the move tool.
Seems like a focus issue perhaps? Latest Windows CS6 Photoshop updated to the latest version.
I need a program to move some selected text to a line something like as extend command but for text objects!
suppose that there is a horizental line (y=constant) or vertical line (x=constant) and some selected text(or other objects), I want a lisp program that move these selected text (or objects) by their "insertion point" to this line.
in other word, if the selected base line is horizental (y=constant) then property of "Y" of all selected text should change to line's "Y"; and if selected base line is vertical (x=constant) then value of "X" of all selected text should match to line's "X" value.
for example, for base vertical line (x=constant) and 3 selected text(or can be any object) result is:
Once a selection is made with the selection tool using a fixed ratio, how can I move it or make fine adjustments to the size of the selected area that maintain that ratio?
I have just been doing some work for a company and they were using AutoCAD 2009.
One of my tasks involved stretching and moving items from imported drawings over Architectural layouts. Lines drawn on the x and y axis were fine. However, if I zoomed in on angled lines they moved out of view making them difficult to select or position to a snap point. If I selected those lines then they remained in place when I zoomed in.
When I approached the company manager he replied by saying that he would zoom in then zoom out to the point where the lines were correct and in place. I thought that he was either joking or was testing me! It meant I could not do any detailed work - which contradicts the use of Auto CAD.
The question has to consider the fact that the lines were angled and that they remained static when selected. When zooming in and selecting them they were off and running out of the screen view. also note that my colleague at the next desk opened up the file on V2008 and he could zoom in okay. I was also using a wide screen if this matters.
I'm not seeing in the tooktip display the description and ID of each Pay Item that has been assigned to a sturcture. I have gone thru Rollovertips but can't seem to locate it. Where can I find this to add to the Tooltip Display?
It was working fine. Then I just did a simple command (pattern a part) and the entire workspace blinked out. The first time it happened I hit UNDO and it was back. So I got out of the drawing and got back in and tried the pattern again. Same issue but this time when I hit UNDO it would not come back. I closed the file without saving and when I went back in the file the workspace is still nothing but white screen. In the browser everything is still visible except for those that I had already changed to invisible. I tried making an invisible to visible and nothing happened. I got out and tried opening the "old version" which should've been before any of this happened and it is also blank. I can go to an ipt or iam in the browser and hit open and it will open in another screen just fine. I just can't see my main assembly. I have Inventor 2012. It shows no errors or messages. I have even rebooted.
I looked thru the forum and found a past issue back in 2005 identical. I tried doing Find in Window on an item in the browser but for some reason that option is not even in the list when I right click.
I have created a surface, when I hover over a contour on it I used to get name,style, layer, elevation. Now I get them all except elevation, I didn't change anything (not on purpose at least) in my drawings.
You know that small window that pops up when you hover the crosshair over an object? It displays color, layer, and linetype for regular objects. I was wondering if it's possible to somehow change what is displayed in this window?
I experience heavy slowdowns and increased CPU usage of mutliple background processes (Chrome, Task Manager, Explorer, DWM and Photoshop for example) when clicking on a menu item which opens the drop-down list. The more images I have open the worse it gets.
This is on a laptop with a i7-2640M CPU, 8GB memory, SSD and NVidia GT520M videocard.
