3ds Max :: Mass FX Manual Settings Causing Crashes
May 4, 2011
I am having an issue where every time I try to switch to Manual for Sleep. Immediately on trying to switch to Manual the MAXScript window comes up highlighting the close parentheses of the Undo block of the - on rb_sleepThresholds changed val do - block and an error window with an OK button and a massive error message pops up - the error window runs off the bottom of the screen just a little if I don't hide the taskbar.
I just installed CS 6 Cloud and now I can't copy, cut, or import from Illustrator anymore. It crashes flash, fireworks, and Photoshop. Illustrator cs6 x86 won't open any files at all. I'm on Windows 7, Dell Precision, 8 GB ram. What to do with all these mdmp crash logs?
Occasionally Photoshop will crash or I have to force close Photoshop. When this happens the settings within Photoshop reset back to the default settings. This is a pain as I must then go back and reset everything again. This has been happening since CS5 and also happens in CS6.
I've been looking for a solution to remove the unit string ie Lbs, g, kg from the value given from a 'Mass' value in a text string.
As you may all know, creating text and having a 'physical property - mass' value...the unit string is there...
Lots of people on here have the problem...no-one has got a solution.
Until now...
Basically...open the part you need to get the mass property of in your text string.
Follow the instructions on this webpage...this is the first part...
[URL]
Basically, this creates a Mass property value in the parameters table that you can call on as a text parameter.
It's similar to the custom iproperty model - mass but NOT the same.
Once you have done this, you can go to the drawing of the part and create a text string in the drawing and call it up as shown in this procedure. BUT it still has the unit string.
Here's the best bit that you want to know...
To get RID of the unit string...open up the part again from the drawing...click on the parameter icon...find the user parameter...in the Nominal value column, right click on the value and you get a pop-up that gives you 3 options...
Custom Property Format, Make Multi Value & Delete Parameter.
Click on Custom Property Format.
The pop-up window comes up...showing you the property type...in my case...the 4 left columns read Text, g (grams), Format & Precision...
On the right hand side I have a Preview of the text...then 3 check boxes...Units string, Leading Zero's, Trailing Zero's.
Units string is checked.
Uncheck it.
Close it...Save your part...go back to the drawing and hey presto!...the text now shows the weight you require as a straight value...no units!
There is a huge number of how to tutorials and books on the web in the books etc. What I really want is a reference manual where each command/feature is explained and options defined in the way manuals used to be written. I have some Scott Kelby books and others, but they all tell you how top do this and that, but I would really like to understand better what I am doing and then I will not need so much the how to books. Is there nothing like that available?
i am using video studio since its 8 version. now testing the trial version of x4. but a very useful editing tool, i think, missing still now. that is video editing fade in fade out manually in the timeline. its possible to do this in audio. but is it possible in case of video. many other video editing soft. do this. but why corel still not updating in their package?
how I can print the manual, also how do I download the manual into the program…I downloaded the zip file opened it with 7 Zip but couldn’t get it to work…I lost my Photoshop 4.0 when my computer crashed and a friend told me your program is much better and free…on my very limited budget that was good news, but I do need to print the manual because I have difficulty reading things on the computer.
I do prepress work for a label manufacturer/printer, and all of our trapping is currently done manually. The art files we work with continue to grow in their complexity, and doing all the trapping manually can sometimes be quite difficult and incredibly time consuming.
I know that Illustrator has a built-in trapping option, but it doesn't allow for a whole lot of control. I've played around with a demo of PowerTrapper (from Esko), but it's fairly pricy, and I haven't been able to get my boss to bite yet. Any plugins that handle trapping.
trying to upgrade Camera Raw to 6.7 on my windows 7(32) machine running CS5.1. without success. It now appears that I am not able to carry of any updates in CS5.1 either through the program update routine or by download. All programs seem to be working fine apart from this.
If I try using Help>Update Adobe Application Manager opens, goes through an apparent download of all the updates but I see little data stream comming in and then staps saying there is a download problem please try later.
If I dowload the update direct for the Adobe site the download is fine but when I run AdobePatchInstaller.exe to istall say Camera Raw 6.7 Adobe Application Manager opens and thinks for a little whlie before giving "an error installing the update"
I have tried Adobe support adviser but this was indicating "cpsid_90243r4: Error DW020 or DW050 occurs during installation - Creative Suite 5.5, Flash CS5.5, Flash Builder 4.5" which is apparently an error sometimes seen during initial installation.
Running Photoshop and the updates as administrator does not work.
where I can find the latest Lisp manual in pdf format. I looked under AutoCAD support/documentation on the site and it says it's available only under ADN and Subscription. I have a subscription for ADT 2004. I've logged on and can't find it anywhere.
I'm a paleontology student and in my work I have to create reconstructions and pictures of fossils, most of them stippled (similar to URL..... I used to work with Gimp 2.6, using paintbrush fading set to 1 px (i.e. every click of a mouse making one, perfect dot). I'm using a mouse, because I find it more comfortable and precise than a graphic tablet. Unfortunately, after Gimp update to 2.8 the brush options changed, the brush fading ceased to work as it used to, and I can't find a way to turn it on (tweaking the dynamics settings would probably work for a tablet, but I find it useless for a mouse). I know there are some plugins for automatic stippling/halftoning, but unfortunately they are not what I want, as they obviously mix information about shape (shading) and color, while I need my pictures to show only the shape of the specimens. Is there any way to make the paintbrush fading work in Gimp 2.8 as it worked in Gimp 2.6?
Ability to set a manual location for an image or selection, and using this ability to give precise display of images, photos or graphics of the sorts.
The reason I say this is because I feel it would make precision much more in-depth, and make it easier to manage the graphics on the display. Another feature that marries this concept is alignment, with the ability to make certain objects on a specific layer to have that similar x or y location to that of another object, with the ability to enable/disable alignment.
While alignment is more of a vector feature, it would make graphic drawing much easier, especially if Paint.NET marries some vector features to improve on it's current bezier curve interpretation of line drawing.
I must state that I am miffed that manual adjustment of C.A. has disappeared in LR4. This would have been easier to understand if some commonly used lenses that are not the latest release had profiles available. For example, I shoot the older version Nikkor Micro D 60mm and 105mm lenses for underwater photography. I built a preset to correct the C.A., which I now assume won't work. The automatic setting does not entirely remove it. Is there any way to deal with this aside from adding an extra step and editing CA in Photoshop (which doesn't do a great job of it, either)?
I have the Guidebook, that is COOL! but does Corel sell a printed content manual? I would love to have that PDF content manual as a printed book. I know it would be 414 pages but it would be cool.
I'd like the option of manually entering information in one column of my point table. I can see how to create a blank column with a title, but how do I edit those cells?
In my particular case I use a point label style in my drawing that contains "Full Description": "PK8", for example. This works great for displaying my point in the drawing - I DO want the number to appear - but when I want to see it in a table, I just want to see 'PK' in a Description column, next to the (obligatory) 'Point Number' column. Having the Description column read 'PK8' next to the point number is redundant. I don't see how I can get this in automatically
I have created a new property set definition and added two manual property definitions and applied this to all objects. Every object on the drawings has distinct values for these two properties. These property values show correctly on the Extended Data tab of the Properties palette.
I have published to DWFX with AEC property set data set to 'Include'. In the resulting DWFX in Autodesk Design Review I can select each object and see the standard properties but not my special property set data.
Can I get Revit to extent to both screens, without having to manually adjust the size so it fits on one side, instead of both?
(Example: I want a floor plan on my left screen (maximized automatically to screen 1 (left), then a 3D view on the right as a reference (maximized automatically to screen 2 (right), to see what is going on instantly!).
I have a NVIDIA QUADRO 4000 installed with the latest driver.
If I have 2 screens. I want the amazing aspects of Revit to be used in creative and efficient ways...
Revit needs to fix it. After all Revit is the best tool man can ask for.
