3ds Max :: File Opens Fine In 32bit Repeated Crash In 64bit?
Aug 15, 2011
I've recently encountered an error using Max 2010 Design where, a file that I've been working on or have worked on in the past suddenly ceases to open while using Max 64 bit. The file will continue to be openable in Max 32bit, but opening it in 64bit causes instant crashing. I've tried installing the service pack, installing new video card drivers - neither of which fixed the problem.
I really don't know where to look for answers at this point, and do not have free reign of my work machine to request a reinstall / reimaging of my hard drive. I need a solution that I can bring to the IT department that fixes the issue as simply and quickly as possible.
I removed my nVidia Display drivers in safe mode and reinstalled, the problem persist. I reset my PS settings... same problem.It works only in Photoshop 32bits.
Both are referencing cooltype.dll. I ran Font Doctor on all system and non-system fonts and found no errors. Booted without Extensis Suitcase loading. Nothing works. All 32 bit programs work fine.
I have 2009 and downloaded the 2012 trial (selecting 32bit as my OS). I'm trying to use a plugin and 2009 is too old, so if it works in 2012 I'll just upgrade. However during install it never gives me an option to install the 32bit/64bit version of 2012. It just auto-detects the OS and installs the 64bit.
how to get it to install the 32bit version? I tried the plugin with the 64bit and it doesn't work. I'm not sure if it's because 2012 is too new or if 64bit doesn't work for the plugin. The plugin is the Flare3D Max plugin if it matters.
I am trying to install Photoshop CS6 on my Windows 8 64-bit PC. While in the loader option I chose both 64 and 32 bit installations, I only get 64-bit to install and work properly, and the Program Files (x86) protoshop cs6 folder stays empty.
I tried to reinstall 32-bit alone, uninstall and full reinstall, I also checked for security permissions in Program files (x86)/Adobe and in Common files which seem OK, Administrators, Creator Owner and System have the desired Full control permissions and finally I apllied the latest adobe_creative_suite_cleaner_tool fix on all products and tried reinstall, to no avail.
The error I always get upon finishing installation is the below:
Exit Code: 6 see specific errors and warnings below for troubleshooting. For example, ERROR: DF024, DW063 ...
When I installed the downloaded Photoshop CS6 software, the application offered to install BOTH 64bit AND 32bit versions. Never seen that before, usually software looks at system and installs the correct version (or you choose before downloading).
I have Windows 7 64bit system. Is there a reason to install BOTH? Is there a problem to have both installed?
I ran MacKeeper the onter day and it actually fixed all my woes, however, when I went to open Photoshop, it only opens in 64bit mode. Could be a coinsidence.I quadroople checked that it is selected to open in 32bit mode in the "Get info" window and rebooted many times, but I can't get Photoshop to open in 32bit mode.I was hoping that there is something I am missing before I have to reinstall.
I'm running Adobe Illustrator CS4 on my Mac Pro running OSX 10.7 Lion and for some reason I am no longer able to open any new or existing files. Illustrator boots up just fine but 'File>New' gives me nothing. 'File>Open' gives me my usual search box but once a file is selected, again, I get nothing. Dragging a file into Illustrator gives me this response',
Before promptly quitting.
I have tried deleting all the files from my Illustrator Preferences folder but doesn't seemed to have worked.
my new installed CC sometimes starts in 64bit and sometimes in 32bit version (according to system info) It works fine but my pluggins dont work at both versions. so sometimes they are availeble, somtimes not. And thats not oke! I use win7-64bit.
Photoshop itself is and always has been very robust, but Bridge gets persnickety sometimes, reporting low memory or just hanging, and when it hangs it really hangs... Today it was not responding and so I went into Task Manager (Win 7 Pro 64 bit) to end the process. I noticed that is is listed as a 32 bit program (Photoshop.exe is not). Is this normal?
I have installed both the 32-bit and 64-bit version of CS5 in my Win7 system. Did that because some plugins does not run on 64-bit.Now I wanted to trial CS6 and so do not wish to have too many versions on my pc.
I want to uninstall ONLY the 32-bit CS5. When I go to either my Uninstaller software or the "Program & Features" of Control Panel, I could only see one icon/program for PS- not 2 (one for 32-bit & 64-bit respectively).
How do I uninstall only the 32bit without affecting the 64bit version?
I am getting Error Code -6 with both the 64 and 32 bit installers. They install correctly but fail when I run Xara. I uninstalled and used CCcleaner in the middle, and rebooted, and deleted the folder in programdata. I am using Windows 8, Norton IS 2013. XD Pro is running fine.
Most of the posts I have seen about this related to mac and I am on a Windows 7 machine. Required for importing video as layers (or as least Photoshop told me so)
I created a simple "Hello World" plugin by following the instructions in Adobe's guide: Getting Started with Adobe Illustrator CC Development, which is available as a pdf here.
The plugin works in the 32-bit version of Illustrator CS6, but I get an error message while trying to launch the 64-bit version. "Error loading plugins. HelloWorld.aip" How can I fix this error?
Since I'm so darn clever I decided I could "save as" a 2009C3d-32bit drawing to 2011C3D-64bit. This drawing was working just peachy for a while. There are no data links. The drawing contained 2009 surface and point groups. I imported some Pipe styles created in 2011. Created 800' of profile,and my pipe network. When I was closing the drawing I got a lot of errors wanting to know if I wanted to save changes to VBA-pipes. Seemed like a good idea at the time so I said Yes. This morning I opened the drawing and it's there but the surface from 2009 no longer has it's Definition data. The point group is gone, breaklines are gone. I needed to remove one lousy bad point out of my surface. The points in the drawing now have three copies and one has the elevation in the point description and you can't fix it. The 3 labels are all tied together and if you erase one they all disappear. I am going to wing it from here and get this puppy out of the office with a little old fashioned autocad. This is my question. Should I have just started a new drawing in 2011, clipped all my old line work and text from the 2009, imported the points and rebuilt my surface? Did I do something wrong and there was some way I should have been able to make this work? I was running 2009 and 2011 on my computer but had to remove 2009 last week. It no longer like livng with his better looking brother "2011" and I had to put him out. I have numerous small projects created in 2009 so this will happen again.
I have PSP 15.2.0.12, win 7 64-bit machine with ample power and graphics card. Regularly run multiple CAD programs and so on.
When I double-click the desktop icon to launch the product it crashes - always. When I double-click an image in Windows Explorer, it launches OK and opens the file with the Edit tab active.
On Windows 7, R-clicking on an image shows "Open With" CS6 but only 64 bit opens. How to also have 32bit as a choice? Since the majority of my plugins only work on 32bit I find using 64bit unfortunately useless. Hence I wold like to know if it is possible to right-click on asn image with explorer and have it open the 32bit version.
I have a problem where softimage 2011 crashes right after I double click the icon. I have tried reinstalling it and that has not fixed it. It only flashes a windows console for about .5 seconds and then does nothing afterwards.
It was working totally fine then WHAM! I noticed it first when i minimized it to the taskbar to look for some other files on my desktop. now it suddenly doesn't want to start. the 'only' thing is that the pc went into hibernation while i was at lunch a few times this week (can't see that having an effect)
I start it up and it crashes +/- after 8 seconds. EVERY time.
- Tried using the "run as admin" = didn't work (tried it just in case)
- tried changing a few settings in nvidia control panel = nada!
- once i got it open within the 8 seconds, I turned off openGL completly = nada!
- I've used the "DisallowOpenGLWindows_OFF.reg" just in case and that doesn't work either. (its a pretty recent GFX card)
all other cs4 apps (master suite) are working fine!
this exact same thing happened just before i reinstalled vista x64 about a month ago.
