When I installed the downloaded Photoshop CS6 software, the application offered to install BOTH 64bit AND 32bit versions. Never seen that before, usually software looks at system and installs the correct version (or you choose before downloading).
I have Windows 7 64bit system. Is there a reason to install BOTH? Is there a problem to have both installed?
I am trying to install Photoshop CS6 on my Windows 8 64-bit PC. While in the loader option I chose both 64 and 32 bit installations, I only get 64-bit to install and work properly, and the Program Files (x86) protoshop cs6 folder stays empty.
I tried to reinstall 32-bit alone, uninstall and full reinstall, I also checked for security permissions in Program files (x86)/Adobe and in Common files which seem OK, Administrators, Creator Owner and System have the desired Full control permissions and finally I apllied the latest adobe_creative_suite_cleaner_tool fix on all products and tried reinstall, to no avail.
The error I always get upon finishing installation is the below:
Exit Code: 6 see specific errors and warnings below for troubleshooting. For example, ERROR: DF024, DW063 ...
-------------------------------------- Summary --------------------------------------
- 0 fatal error(s), 14 error(s), 0 warning(s)
----------- Payload: {83463106-DD1C-4FE5-A61C-DF6715472AD4} Adobe Extension Manager CS6 6.0.0.0 -----------
ERROR: DF024: Unable to move file at "C:Program Files (x86)Common FilesAdobeInstallersadobeTemp{83463106-DD1C-4FE5-A61C-DF6715472AD 4}\_90_f004805aa933f587236382b1bac3bac1" to "C:Program Files (x86)Common FilesAdobeHelpCfgen_USExtensionManager.helpcfg" Error 5 Access is denied.(Seq 117)
ERROR: DW063: Command ARKMoveFileCommand failed.(Seq 117)
[code]....
What are the advantages / disadvantages of using PS / CS5 in 64bit over 32bit ?
View 4 Replies View Relatedwhen opening an image into photoshop cs5 from bridge, how do I set the default from 32 bit to 64 bit
View 1 Replies View Relatedmy new installed CC sometimes starts in 64bit and sometimes in 32bit version (according to system info) It works fine but my pluggins dont work at both versions. so sometimes they are availeble, somtimes not. And thats not oke! I use win7-64bit.
View 2 Replies View RelatedPhotoshop itself is and always has been very robust, but Bridge gets persnickety sometimes, reporting low memory or just hanging, and when it hangs it really hangs... Today it was not responding and so I went into Task Manager (Win 7 Pro 64 bit) to end the process. I noticed that is is listed as a 32 bit program (Photoshop.exe is not). Is this normal?
View 3 Replies View RelatedHow to transfer PS CS6 32 bit windows 7 to a new computer 64 bit windows 7?
View 1 Replies View RelatedI have installed both the 32-bit and 64-bit version of CS5 in my Win7 system. Did that because some plugins does not run on 64-bit.Now I wanted to trial CS6 and so do not wish to have too many versions on my pc.
I want to uninstall ONLY the 32-bit CS5. When I go to either my Uninstaller software or the "Program & Features" of Control Panel, I could only see one icon/program for PS- not 2 (one for 32-bit & 64-bit respectively).
How do I uninstall only the 32bit without affecting the 64bit version?
I have Photoshop CS6 on my 32 bit pc, it has windows 7. I now have a now pc windows 7 64 bit. How can I transfer my CS6 to my new pc?
I looked on your sire from my new pc but could only find Creative Cloud.When I downloaded it, it would not accept my license number.
I have 2009 and downloaded the 2012 trial (selecting 32bit as my OS). I'm trying to use a plugin and 2009 is too old, so if it works in 2012 I'll just upgrade. However during install it never gives me an option to install the 32bit/64bit version of 2012. It just auto-detects the OS and installs the 64bit.
how to get it to install the 32bit version? I tried the plugin with the 64bit and it doesn't work. I'm not sure if it's because 2012 is too new or if 64bit doesn't work for the plugin. The plugin is the Flare3D Max plugin if it matters.
I removed my nVidia Display drivers in safe mode and reinstalled, the problem persist. I reset my PS settings... same problem.It works only in Photoshop 32bits.
View 4 Replies View RelatedMost of the posts I have seen about this related to mac and I am on a Windows 7 machine. Required for importing video as layers (or as least Photoshop told me so)
View 12 Replies View RelatedCan a 64bit and 32bit workstation workshare with no problems?
View 2 Replies View RelatedI am getting Error Code -6 with both the 64 and 32 bit installers. They install correctly but fail when I run Xara. I uninstalled and used CCcleaner in the middle, and rebooted, and deleted the folder in programdata. I am using Windows 8, Norton IS 2013. XD Pro is running fine.
View 6 Replies View RelatedI've recently encountered an error using Max 2010 Design where, a file that I've been working on or have worked on in the past suddenly ceases to open while using Max 64 bit. The file will continue to be openable in Max 32bit, but opening it in 64bit causes instant crashing. I've tried installing the service pack, installing new video card drivers - neither of which fixed the problem.
I really don't know where to look for answers at this point, and do not have free reign of my work machine to request a reinstall / reimaging of my hard drive. I need a solution that I can bring to the IT department that fixes the issue as simply and quickly as possible.
I created a simple "Hello World" plugin by following the instructions in Adobe's guide: Getting Started with Adobe Illustrator CC Development, which is available as a pdf here.
The plugin works in the 32-bit version of Illustrator CS6, but I get an error message while trying to launch the 64-bit version. "Error loading plugins. HelloWorld.aip" How can I fix this error?
we have purchae network license of AutoCAD 2012. we have a server 64bit or client machines 32bit
my question is that can i create deployment with 32bit option on 64bit machine . because our server is 64bit
Since I'm so darn clever I decided I could "save as" a 2009C3d-32bit drawing to 2011C3D-64bit. This drawing was working just peachy for a while. There are no data links. The drawing contained 2009 surface and point groups. I imported some Pipe styles created in 2011. Created 800' of profile,and my pipe network. When I was closing the drawing I got a lot of errors wanting to know if I wanted to save changes to VBA-pipes. Seemed like a good idea at the time so I said Yes. This morning I opened the drawing and it's there but the surface from 2009 no longer has it's Definition data. The point group is gone, breaklines are gone. I needed to remove one lousy bad point out of my surface. The points in the drawing now have three copies and one has the elevation in the point description and you can't fix it. The 3 labels are all tied together and if you erase one they all disappear. I am going to wing it from here and get this puppy out of the office with a little old fashioned autocad. This is my question. Should I have just started a new drawing in 2011, clipped all my old line work and text from the 2009, imported the points and rebuilt my surface? Did I do something wrong and there was some way I should have been able to make this work? I was running 2009 and 2011 on my computer but had to remove 2009 last week. It no longer like livng with his better looking brother "2011" and I had to put him out. I have numerous small projects created in 2009 so this will happen again.
View 5 Replies View RelatedWhen I try to import my custom tool palettes onto my co-workers computer, his machine does not see the xpg.
My machine is a 64 bit computer and his is a 32 bit.
Is there a way to convert the xpg to a different extension or will I have to set up his palettes from scratch?
I am generating a panorama from 24 RAW files (three rows of 8 images each) using Photoshop Auto Align and Auto Blend Layers and need more control over which image it selects from overlaping images. This image is from the Snake River Overlook and one image has a raft in the river and the overlapping image does not. I have run the Auto Align Layers using all five of the options (Perspective, Collage, etc) and all five show the raft in the river. When I run Auto Blend Layers the raft disappears in all but the Auto Align run using the Collage selection. Is there any way to exercise control of this so the raft does not disappear?
View 5 Replies View RelatedI have had Window 7 64 bit operating system put on my computer.Will I get the benefits of additional Ram on Photoshop CS6 Extended?
View 1 Replies View RelatedCan users with a 64 bit computer share pc3's and pmp's with 32 bit users without adverse effects?
View 1 Replies View RelatedI have an assembly that was created on 64 bit version of Inventor 2013, the total file size of everything is around 150MB. Even if I use 'Pack and Go' to move the file to another computer running the 32 bit version I get an error when I try to open it which says something like:
'unable to allocate 3GB memory for FBAttributeSegment'
The actually figure is over 3GB but of course on a 32 bit version of windows it is physically impossible to allocate that amount of memory (even with the /3GB in boot.ini hack)
I've performed various dynamic simulations as well as animations within the assembly so I'm thinking that perhaps its trying to allocate that huge amount of memory for a saved state of one of those.
What FBAtributeSegment might be and whether there is any special way to save an assembly to avoid this problem? The name FBAttributeSegment doesn't correspond to any part or assembly names.
I should also add that I have no problem opening it in a 32 bit version of Fusion which again suggests to me that it is something like simulation or animation that is causing this
There is no crash report. With Bridge CS5 everything works fine. (Opening RAWs with minibridge CS6 works file too.)
View 5 Replies View RelatedJust installed CS6 on my new workstation and Photoshop; it freezes upon opening.Every other program I have installed has worked flawlessly, including the rest of the CS6 Suite and Lightroom 5.Both Windows and the Adobe Suite have all available updates already installed.Computer is a new HP Z420 Xeon Workstation, Windows 7 Pro 64bit, 16GB Ram.
View 15 Replies View RelatedIn Photoshop CS6 (64bit), when using the brush tool (with a brush with pressure sensitivity activated), I quite often get a line drawn at the max width selected, as if there was no pressure sensitivity. Everything goes back to normal after I start drawing another line, and happens again after a few lines. It's quite random.
I don't have this problem in any other software (Illustrator CS6 64bit, Painter XII, Sketchbook Pro, Zbrush, ...). I have already checked and I've found some other users on other forums with the same problem.
One example, with a picture of the problem: [URL] Another one, exact same problem: [URL] Some of those users seem to have solved their problem by installing an old driver (6.1.5r3), but they had that problem with Intuos TABLETS in the first place, not a Cintiq 24HD... I have tried that, but unfortunately the driver is not compatible with the Cintiq 24HD.
To test this out: I've been able to reproduce the problem 90% of the times I've tried. if I keep the pen at 1 inch from the display so that it's still recognized by the screen but it's not drawing, then wiggle it a bit, and then I slowly move to the screen and tap it (as if I was starting a line with very low pressure), the problem appears and it makes a large dot, as if there was no pressure sensitivity. As I said the test doesn't work every time, but almost.
This is an image of what happens when I try and make dots in Photoshop. These are done trying to push the pen with the same (low) pressure. The big ones are from when the issue appears: [URL]
I have tried the pressure test in the Wacom utility software and it seems to work fine, it never jump to full even when I try the method I've just described. In the diagnostic page of the Wacom utility software the pressure is always correct, even when in Photoshop there's the brush sensitivity issue.
note: I've already tried to completely re-install my computer + the Adobe software + the lastest wacom driver for my Cintiq 24HD, and the problem is still the same.
Both Photoshop CS5 (64 Bit) and Premiere Pro (64 Bit) Crash on Start up. 32 bit version of Photoshop works fine.
Here is the problem signature when they crash.
Problem signature:
Problem Event Name: APPCRASH
Application Name: Photoshop.exe
Application Version: 12.0.0.0
Application Timestamp: 4bbc5b10
Fault Module Name: CoolType.dll
Fault Module Version: 5.7.82.7602
Fault Module Timestamp: 4b980c97
[code]....
Both are referencing cooltype.dll. I ran Font Doctor on all system and non-system fonts and found no errors. Booted without Extensis Suitcase loading. Nothing works. All 32 bit programs work fine.
I am having all sorts of trouble with my setup - 32bit windows 7 and 32bit CS6. I have a 2TB hard disk (with 1.7 unused) and 8GB Ram installed.
I understand that this setup has a maximum amount of 1.7GB ram available to CS6 and this may possibly be the problem. (see the attachment)
My D800 NEF images are around 40MB each. I get out of ram messages in Photoshop and the same in Bridge. In Bridge the 100% lupe takes forever to activate and eventually after several images it says the 100% lupe is unavailable. If I purge the cache it is OK again for just a few images. There appears to be no problem with smaller files, jpegs etc.
I will change the setup to 64bit CS6 on Win7 64bit if this is the only way to rectify the problem.
Now that I have CS4 running on XP I'm trying to do some real work with it. First thing I do is disable tabbed windows and other new features as they have yet to prove themselves useful in my workflow. Perhaps I'll grow to appreciate them. But for now I'm just trying to get the app to work with the good ol' floating windows.
1) Can I stop new images opening with a Window that's glued to the top left corner of my screen? Past versions of PS just opened a floating Window. CS4 obliges me to 'unstick' the Window from the top left corner every time I open a new image. I've scoured the preferences but have yet to find any way to turn off this feature.
2) When grabbing the top bar of an open image window to move it on my screen I find it to be sluggish. With previous versions of PS one would grab the top of the image window and move it quickly on your screen to wherever you want. The response was pretty will instantaneous. With CS4 there seems to be a very slight lag whereby the move is occurring slightly behind the cursor moving it. It's not a huge lag. Just enough to get the sense that there's something amiss. I'll try it in Vista64 to see if the same thing is occurring there.
before the latest updates to photoshop CC one could export from LR a series od Raw images to HDR Pro, create a 32bit file, save and editin LR or CR.
Now, when creating the 32bit file photshops promts a button for edting in Camera Raw instead of the usual "create file" (then to be saved and opened in LR). Which is ok, but if I edit the file in CR and then open it as a Tiff in LR the adjustments done in CR are not visible in the sliders, but not only, the images is of bad quality in LR.
Several of the filters I use regularly don't have 64 bit versions.
View 13 Replies View Related