3ds Max :: Error Sending New Network Job
Sep 15, 2011Sometimes i get this error, when i send a new network job..3ds max Job Assignment Dialog
Error submitting job to manager.251 0 No group to list...Then i try to send it again and it works.
ADVERTISEMENT
Lightroom :: Error Message In Sending Email
Mar 12, 2013I'm the only user on a new PC with Windows 7, with admimistrator privileges, and able to move files by LR 4.3 between these two drives. I use Thunderbird for email, and have validated my outgoing account in LR's Email Account Manager. My OS and apps are in drive D:, a HDD, and the main LR catalog is in drive C:, a SSD. In attempting to send email from LR I get the error message "unable to create temporary files on the volume C:" Attempting to email from a second catalog that resides in D, I get "unable to create temporary files on the volume D.
View 1 Replies View RelatedPremiere Pro :: Dynamic Link Error When Sending Sequence To AME
Mar 4, 2014I have a very short sequence without errors in premiere pro, but when I drag the project over to Adobe Media Encoder, I get a "Dynamic Link Error"...
"There was an error when adding selected sequence to the batch".
Currently I have to export sequences one at a time, and that's not going to be cool in the near future.
Premiere pro 6.0.5
Adobe media encoder 6.0.1.31
Photoshop :: Network Files - Error Messages - Using Compatibility?
Jan 8, 2013I use a Windows 7 64 bit Dell at home and at work. Both have Photoshop CS6 (not extended). This week when I saved files at home using file compatiblity (since co-workers in my office are on CS 5.1) and FTPed them from home to the work network I ran into all sorts of issues.
5.1 users reported getting all sorts of errors including...The document contains unknown data which will be discarded to keep layers editable... and another one about missing "color books"
I read about cross version problems with shapes with the new CS6 vector strokes applied. Sure enough, when I sent CS 5.1 co-workers small test files by email they could open all of them but the one with the shape with CS6 vector stroke. So I went back to the larger PSDs and removed the strokes from any shapes, but the office still could not open the files.
I too, even though on the same CS6 product get an error "There was a problem reading the layer data. Read the composite data instead?" If I click to do so I get another error "Could not complete your request because the file is not compatible with this version of Photoshop" which is simply not true wince both are CS6
AutoCAD Civil 3D :: Pipe Network Fatal Error
May 22, 2012We are having trouble with one of our C3D 2013 seats crashing (giving a fatal error) when trying to edit or do anything with a pipe network. The drawings work fine on other computers. I am trying to keep from having to remove and reinstall the software.
View 5 Replies View RelatedAutoCAD Civil 3D :: Associative Network Evaluation Error?
Jan 9, 2014I am working on a project and just about to issue set out data and am getting an Associative Network Evaluation Error.
How to track down which objects are affected and are not updating?
Photoshop :: Error 1606. Could Not Access Network Location 0
Jun 12, 2009The error is the following: "Error 1606. Could not acess network location 0." It happens after the computer specifications process. I've tried to search for solutions, but with no results at all... I've tried to track it down in registry, but also with no results.PC: LG E500OS: Windows Vista Home Edition Help?
View 3 Replies View RelatedAutoCAD 2013 :: Network Associative Evaluation Error
Jul 23, 2013Run Autocad 2013 SP2 on windows 7 boxes.
Anyway, one of our cad operators is running into the following error when he opens a particular drawing or when he audits it:
Associative Network Evaluation Error
The object cannot be resolved or value limit has been exceeded.
Inconsistent associative objects may display geometry and grips incorrectly and update in unexpected ways when edited. You can undo to restore the associative object to its previous state.
From what he's described to me, it sounds as if he is building this from several separate files. At some point, things go nutty, and that error develops. When the file is loaded, things are out of position, etc.
No luck in getting that error to vanish. Told him to add the individual parts one at a time, and saving versions as he works so we can, hopefully, find what is breaking everything.
AutoCAD 2013 :: Associative Network Evaluation Error
Mar 13, 2013Every time I open this drawing, I get this error message:"Inconsistent associative objects may display geometry and grips incorrectly and update in unespected ways when edited. You can undo to restore the associative object to its previous state."
I wonder if this is the result of one of the xref files from the civil, and what to "undo" to whatever "previous state" will prevent this popup window.
Previous searches on this error have brought up discussion of CIvil 3D grouped objects, but like I said, these are simply files we've referenced into our landscape base.
Photoshop :: Why Couldn't Save Images In Network Because Of Program Error In CS6
Oct 8, 2012We were using Photoshop CS3 and decided to upgrade to version CS6. However, several times, to save images and if they are in network storage or servers, the message that you can not save them, because of a program error.
View 37 Replies View RelatedAutoCAD Civil 3D :: Pipe Network Data Reference Error
Jun 28, 2013I have a major error currently affecting my work that I need to resolve ASAP. I'm using C3D 2012 64 bit with Windows 7. I have multiple model drawings that I have created pipe networks and view frame groups in, and using those model drawings I have created plan and profile sheets from the view frames. I created data shortcuts of all my pipe networks and referenced the pipe networks into my sheet drawings. In the sheet drawings I drew the network parts into the profiles, and everything displayed exactly as it was supposed to. No issues at all.
Now fast forward about a month. Out of the blue one day I open one of my sheet drawings to perform some edits and notice that the pipes that were previously displayed in the profile views showing inside and outside walls with the centerline turned off now show up as a simple line. I haven't changed any settings at all. I looked at the properties of the pipes, and they seem to have all ignored their asigned diameters- the pipe data in the referenced network now assumes all inverts & crowns are the same elevation as the centerline.
Long story short, I have gone so far as to completely reinstall the program and restart the drawings, but the more I edit the oringal network the worse the problem gets. Now all of my structures are attaching themselves to the surface profile instead of the pipes, and the entire network gets put onto my current layer rather than the layers I assign in the Create Pipe Network Reference dialog box.
It happens to any drawing I try to open on this network- even ones created by third parties that I haven't edited. And the problem resides in the drawing because anyone I send the drawings to has the same problem. It will even crash the entire program sometimes when they try to open my drawings.
Civil 3D 2012 SP3 - Windows 7 64 bit - Intel Core i3-2120 - 8 GB Memory
AutoCAD 2013 :: Fatal Error Opening Drawing From Network Share
Dec 12, 2013Environment:
Files stored using SAMBA shares NetgearReady NAS
Two sites connected via WAN
Users using Windows 7 -64bit with Architecture 2014
Mapped drives are used for both site to access NAS, but use different drive letters.
At one point working the projects, users starting getting fatal errors opening from the share. All attempts to get past this failed and I thought the drawing or base files were corrrupt. However, when the files are moved locally to workstation and opened without issue. The users in one office are now working off this files using UNC \serverproject...
The interesting thing, is that users in the other office have no issues dealing with these drawings using on the NAS. The only difference is the WAN and drive mapping letter. This is how they have always worked and never had this issue. The only other thing I will add is they upgraded from 2010 two months ago, but no problems with any other projects.
Lightroom :: Error Message - Catalogs Can't Be Opened On Network Volumes / Removable Storage
Feb 3, 2014I had my Lightroom 3 catalog on an external hard drive which became corrupted . the only thing I could do was drag and drop it on another one. when trying to open it I got this Error message."Lightroom cannot open the catalog named “Lightroom main Catalog-2-2” located on network volume “Public”. Lightroom Catalogs can not be opened on network volumes, removable storage, or read only volumes".? I didn't have the ability to export catalog.
View 3 Replies View RelatedAutoCAD Civil 3D :: Default Pipe Network Layer (Not The Structures Or Pipes The Network)
Dec 7, 2012I am using Civil 3D 2013. I work in an office where we have a few different flavors of Autocad (LT, MEP, regular vanilla AutoCAD etc...) and versions (2010 LT, 2011, 2012, 2013).
For the most part there isn't much inter-office drawing coordinate that has to happen, but there is the occasional project where multiple disciplines (Structural, Mechanical and Civil Site) have to share drawings.
The specific problem I am having is when I share my 2013 Civil 3D drawing with a user using 2011 MEP. He gets the typical rectangle for the proxy objects (in my case, my pipe networks for sanitary and storm drain). We've tried downloading and installing various object enablers, but there doesn't seem to be one for a 2013 to 2011 scenario. So I setup my parts to be on layers that he can just turn off. HOWEVER... the actual pipe network (not the structures, parts, labels etc... the network itself) ends up on layer 0. For this specific project, I do the old (ssget "x" '((8 . "0")) search to select all objects on layer 0, add those objects to a selection set (pselect), then in my modify objects dialog I filter for pipe networks, then change the layer to something other then 0.
While this is a workaround that works for me, what I really want to know is if there is a way that I can change the default layer that the network (again, not pipes, structures or text, the actual network) so I don't have to use the workaround. Any thoughts?
P.S. It's killing me that I had to create a new Autodesk login and now all my AutoCAD "street cred" is lost
"The source of expertise is not in the memorization of the minute details of a subject but in the thorough understanding of the fundamental concepts on which it is based."
AutoCad :: Sending Job As BMP?
Jun 20, 2011On my big plots IE with loads of hatching etc I check the option to send job as BMP which as you will know saves on the memory for the plotter. My question is, can I set this up to be permanently on for every plot? I'm simply trying to save myself time when I have to check that option. instances where I forget to check it and sit for 10 minutes waiting for the plotter to fire up
View 0 Replies View RelatedPhotoshop :: Keeps Sending Me To Adobe
Apr 11, 2009when i Try to add a gradiant to a font it takes me to adobe help ? Does anyone have any idea why this is and sometimes it will also crash on me in the middle of my work. Im using Dual monitors also my pc is up to date with the latest Drivers for the Video card and the rest. Running service pack 3 8800 gtx Graphics card.
View 1 Replies View Related3ds Max :: Sending Files To Mudbox?
Jun 11, 2013when using the send to feature of 3ds max it take forever to get files to and from mudbox, is there any issues with how it works?
[URL]
Lightroom :: Sending From LR4 To Photoshop CS3?
Mar 11, 2012how to get these two to work together? The support specifically mentions CS3 working with it and even mentions that CS3 will use ACR 4.6. When I tell LR4 to open a RAW file produced by my Canon XSi in Photoshop, I get a message that "this version of LR may require camera raw 7.0 for full compatibility". Then I can choose "render using lightroom", "open anyway", or "cancel". If I choose "open anyway" it opens up Photoshop but nothing else happens.
Eventually after a few minutes LR4 starts telling me it couldn't open Photoshop (even though it "magically" opened it a few minutes earlier) and when I click off that error, it comes up again, then a new error saying it couldn't send the file to Photoshop. After clicking away that message it then proceeds to make a copy of the file as a .psd (which I did set up in the LR4 preferences for external editor) and it opens up.
In the Library module or Develop module, select the photo you want to edit. Then, choose Photo > Edit In Adobe Photoshop.If you’re opening a camera raw or DNG file in Photoshop CS3 (10.0.1) or later, it opens directly.
CorelDRAW X3 :: Attaching / Sending CDR File
Jan 11, 2012I've been trying to attach a CDR file from Corel to send in an email. The recipient can't open it. I've tried everything I can think of and still no success.
View 2 Replies View RelatedCorelDRAW X5 :: Sending Command To Program
Jan 20, 2011I had a few glitches with my system which I resolved but a casualty has been Corel Draw X5 which has always run perfectly well but I guess.I have tweaked something in fixing the other problem and now it will not run.
If I click the icon within Program Files nothing happens. If I double-click a .cdr file which should be opened in Corel I get the error message "there was a problem sending the command to the program". I've un- and re-installed several times, even gone through the registry and removed all references. There is no appdata for the program, each time I reinstall it's a clean install, so what am I missing?
At install stage, I get asked for my serial number, which I enter, then the install continues. I never get as far as the activation stage as the program never starts. I don't think it's a Corel issue anyway, so much as a Windows 7 issue.
Photoshop :: Saving And Sending An Action
Jun 14, 2007I've made a cool action which includes resizing for web and lab sharpening. Is there a way to save this action and send it to a friend so he can install it in his actions?
View 7 Replies View RelatedIllustrator :: Sending A File To Print As PDF?
Nov 13, 2012Tried to Save As - Adobe PDF in the hopes that I can email that file to printer or others to view. Comes up blank.
View 6 Replies View RelatedPhotoshop Elements :: Sending A Photo From E6
Jan 2, 2013I used my Elements 6 on my old Windows Vista okay to send pictures. I have a new Windows 7 computer and a new e-mail address. The program ask me for an association or setup an e-mail account. I can not find where to do that.
View 2 Replies View RelatedLightroom :: Sending Pictures In Email?
Feb 13, 2012How do I send a picture from Lightroom 3.6 through email when using Verizon.net via Google Chrome?
View 2 Replies View RelatedLightroom :: 5 Crashes When Sending Emails?
Aug 2, 2013Tried several times to send an email from LR5 using Microsoft Outlook 2013 as email account. Crashes all the times.
View 2 Replies View RelatedLightroom :: 5.3 Crashes When Sending Emails?
Jan 20, 2014I have LR 5.3, Windows 7, 64 Bit, and Outlook 2013 64 bit, as my email client - FF 26.0 browser.When I send an email (no matter what size) from LR, I get an immediate error message "Adobe Photoshop Lightroom Has Stopped Working". Then, "Windows Will close the program and notify you if it finds a solution to the problem" (which it never does).
View 2 Replies View RelatedLightroom :: 5 - Sending Photos To Photoshop?
Nov 1, 2013when I send photos from Lightroom 5 to Photoshop (CS6), make changes and return to Lightroom, I will see a new frame with the changes I have just made. However, I notice that I lose my original enhancement settings from Lightroom. In other words, the enhancements on the photo are still there, but the sliders from the right hand tool bar have all been reset. Basically all the changes have been 'baked in' to the photo, so I can no longer make modify/delete the enhancements I originally made. This is particularly important when working with brushes.
Is there anything I can do to preserve these modifiers as I go back and forth between Lightroom and Photoshop?
Photoshop :: Sending Bridge CC To System Tray
Jun 20, 2013In CS6, when using mini-bridge in PS, Bridge is working in the system tray ... this is not the case with CC. How can I send Bridge CC to the system tray on windows OS?
View 4 Replies View RelatedPhotoshop :: Sending Photo From LR4 To CS5 - Camera Raw Plugin
Oct 23, 2013When sending a photo from LR5 to CS5 I get a message saying this version of LR may required the photoshop camera raw plug-in version 8.2 for full compatibility. I don't know what to do?
View 1 Replies View RelatedCorelDRAW X5 :: Sending Text To Vinyl Cutter
Nov 23, 2011Every time I send text to my vinyl cutter from CD it puts vertical lines thru some of the letters and cut them out... letters such as : D, O, Q, G, S and others. I have tried different fonts but they are all the same.
It seems as though I have a button pressed or something turned on but cannot figure what is wrong.
CorelDRAW Graphics Suite X5 :: Sending Stuff By PDF
Feb 3, 2012I want to send several graphics to someone by PDF. I think I can do it with Corel Draw, but I want to send a number of JPEG or Tiff graphics all in one PDF file via ONE e-mail.
I think I can do it with graphics in CDR format, BUT, I can't find any instructions on how to do it with any kind of RASTER graphic!
Unfortunately, the people I want to sent them to can only receive stuff in JPEG or Tiff, but NOT in Corel Photo-Paint. I know I can send the graphics one at a time, but that's a bit tedious!