I'm working with (an older) Videostudio version : Pro X2. This works perfectly, but when I have al lot of clips in the timeline, the library (with the thumbnails) doesn't indicate what clips I already inserted.
Is there a possibility to add a little checkmark on the thumbnail, so I don't insert the same clip twice?
Or from what version on (Pro X3 - X4 - X5) is this option included?
I am not able to save the changes that I make to the starting position of my scenes thumbnails when I use a Thumbnail Menu to create my DVD. I am using Video Studio X4 with Service Packs 1 and 2 installed running on Windows XP Home, SP 2 with all updates installed and DirectX 9.0. The scene changes work fine when I Preview them but they are not saved when I close the Create Disk sub-menu. When I return to the “Menu and Preview” section of the Create Disk sub-menu, the Main Menu scene change is present as is the Chapter 1 scene change but the other chapter scene changes are gone. What can I do to correct this?
View 1 Replies View RelatedI have created a chart with simple CADD geometry, and at the top of this chart are two boxes (polyline elements). For any case where I use this chart, only one of the two boxes will have a checkmark inside of it.Is there a way that I can add a field-like element/action so all I have to do is toggle between one box or the other?
If toggling is possible, can it also affect turning on or off a nearby relative text element?
How do I delete both the thumbnail and the clip from my computer ? The Delete in the library only deletes the Thumbnail.
I want to clear the unusable files from my computer.
Wondering if it is possible to change the default Frame that is used for displaying thumbnail chapters when I create my Menu for Blu-ray authoring The existing Frame that has the Polaroid /postcard look with a paperclip, etc
If so, how does one replace this frame?
Frame.jpg (5.89 KiB) Viewed 299 times
I am Creating a DVD + menu using X4..I have 5 Mpeg videos added to the burner module..I am using one of the Text Menus...Customised to use 6 per page.My five links show on the first menu page.From Advanced I have selected to show Thumbnail Numbers
I expected to see 1 through to 5...I see 1, 2. 3, 4, then 1..I added a further video just to make sure and I see 1, 2, 3, 4, then 1, 2 …the numbering starting again.
I'm at the stage in Trevor's guide entitled 'My guide from Mpeg Capture to Burn'
Burn a DVD
stage 11/ add menus and chapters as required.
I have navigated to the exact points and done add chapter for each point, but the Thumbnails are not the best possible for the indicating the section's contents.
Post says double click on the thumbnail. I do that, navigate in the preview window to a more representative scene. Then it appears all I can do is 'add chapter', then it appears on the timeline as an extra chapter. My question is has it really increased the chapters, or is it just that UVS only has this way to show the new Thumbnail ?
How does one change the thumbnail for a video clip? By default, VS Pro X3 seems to use the first frame of the clip. I would like to choose the frame. Is that possible in VS?
View 7 Replies View Relatedis it possible to show thumbnails of a clip in the timeline like this one?
View 2 Replies View RelatedIs there a way to show more than just one thumbnail from a given clip when inserted into the video track? Currently in VS X4 I get just a thumbnail at the start of the clip and a blue bar after that. In Microsoft Movie Maker by comparison you get thumbnail after thumbnail from the various frames within the clip, I also see in one of Trevor's tutorials (bottom of the page) URL.... there's thumbnails galore but he may be using images rather than a video clip.
View 3 Replies View RelatedWhen I produce a MP4 video file in X4 it shows a thumbnail in the video file. I cannot figure out where this image comes from. It seems sometime to be the first video image from all tracks, but sometimes it is just the upper video track and sometimes it is a picture from a later point of the video. How does it work? And how can I control which image is used?
View 3 Replies View RelatedIs there a way to transfer project folders and their respective thumbnail content (video, image, sound links) from Corel VideoStudio Pro x4 to the newly installed Ultimate x6?
View 3 Replies View Relatedwhat the square on the thumbnail is? When I double click on the thumbnail it takes me to the color picker and allows me to change the color of the layer.
View 2 Replies View RelatedI recently upgraded from CS5 to the latest version and I'm having trouble adjusting. One of the smallest but most usable features of previous versions of photoshop has been that when I go to File > open and browse to one of my thousands of image folders Photoshop will display a small thumbnail of whichever image I have selected.
This is essential so that I can tell which images I need rather than by file name which is useless.I'm probably just being thick and just need to find where to switch on the thumbnail preview.
I'm having alot of issues with thumbnail previews in Finder ever since I updated to Mavericks. Basically, any TIF-files that include layer masks won't show a preview at all in Finder.
I just get the static TIF-file graphics, but no actual preview. I have enabled to maximise compatability in Photoshop CC, and all the files are either 16 or 18 bit files.
I can get the thumbnail view of the active document from below code
Document doc = Application.DocumentManager.MdiActiveDocument;
System.Drawing.Bitmap bit = doc.Database.ThumbnailBitmap;
How can i get the thumbnail view of the dwg file by passing filename means like below.
Document doc = .....(fileName) : here fileName is dwg file.
I have a picture that was sent to me when the picture is actually opened the original person blacked out parts of it and they do not show but whenever it is sitting in my folder the whole picture shows up as a thumbnail. Is there anyway to remove the black layers or anything to get the whole picture to show since it is all showing as a thumbnail?
View 2 Replies View Relatedhow to create batches of thumbnails in photoshop (or a good plugin)?
View 3 Replies View Relatedi've got PS CS, and in PS, or in Finder, jpegs are thumbnailed with the generic jpeg image, unless they've been saved in PS. is there any way of converting all my pics to have thumbnails as its a bit of stress when browsing only seeing thumbs of the pics i've edited..
View 3 Replies View RelatedI am resizing images for thumbnaills. They need to match existing thumbnails in a little gallery. I sized them exactly like the existing thumbnails, but the image content looks smaller. I looked at every setting I could think of and couldn't figure out how to enlarge the content of the thumbnail. I have attached both images so you can see my problem. I am not artistic so I don't know how to minipulate perspective.
View 1 Replies View RelatedI wants get thumbnail of dwg file. Then, set background color(black) of this thumbnail.
View 1 Replies View RelatedI'm trying to draw a picture of this eye I have saved on my computer for a friend. (the photographer wants me to try and recreate it digitally)
is there a way to make it so the photo I have saved shows up as a thumbnail or a "view" or something on the GIMP window, so I don't have to keep going back and forth between Firefox and GIMP (it becomes a HUGE bother)?
I know you can make a sort of thumbnail of your work that you've got on GIMP (so you can see the entire image, just in case you're zoomed in or something), but is it possible to make a thumbnail of an actual photo to use as reference while I paint?
Any way to save the drawing and not lose the thumbnail preview.
View 9 Replies View RelatedI'm in the process of porting my plugin to CS6 (was on CS3 SDK) on Windows and I have encountered an issue with thumbnail generation. The plugin will pick the selected art content and generate a thumbnail with AIArtSet, AIRasterize and AIRasterSuite. This code had been working on CS3, CS4 and CS5, both Mac and Windows.
Now on CS6, when calling sAIRasterize->Rasterize(), I get an error that says "The operation cannot complete because of an unknown error. [CANT]". AI pops the error directly to the user while the return value from the method call is zero (no error). While investigating, I found the error message isn't poping up if the color space is not RGB related, although the image is often a black rectangle.
I've played with the AIDrawImageSuite to try to design an alternate method to generate thumbnail but I was only successful with the Draw Color Swatch method call (copying the sample code)
I've only tested on Window so far. I'm getting this same CANT message when choosing the web profile for a new document. I'm not seeing the message on Mac but I haven't tested the code on CS6 MAc yet. How do you generate thumbnails on CS6?
why my saved for web files in CS6 are appearing as a blue box with a question mark. I'm using the trial version.
View 1 Replies View RelatedI'm having to make a thumbnail in Photoshop CS6 that is 125x100 & 72 DPI. When i put the image together the words are blurry and pixelated. im not sure why this is happening or how to fix it..
this is the thumbnail at 125x100 and 72 DPI which is the directions given and its so pixelated!
Each time I batch process thumbnails in CS6 v13.1.2x64 I've noticed that the resulting thumbnails do not match the sequence of the original photos the thumbs are batched from.
Is this a fault with CS6 or a lack of communication between my Nikon, Mac and Adobe?
The original full sized photos are JPEG fresh out of the camera and havent been preprocessed. I will add that if I do apply batch filter to the full size photos, they too are pushed out of their original numerical sequence.
How can I increase the thumbnail size in my pictures ?
View 4 Replies View RelatedI recently upgraded from CS5 to CS6 and when I save a file, in any format, I get no image icon thumbnail for the saved file. If I save the same file in CS5, I get the thumbnail image icon, but with severe pixelation of the thumbnail image. It used to be I would have to periodically reboot the finder or fix permissions to resolve the latter issue, but now even that doesn't work. I'm running Mac OS 10.8.
View 2 Replies View RelatedBefore CS6 version, I can search the vector mask thumbnail.
View 1 Replies View RelatedI'm creating a portfolio page on my website, and a while back I've seen a beautiful effect on someone else's portfolio site.
What they did was create a fairly large thumbnail image about 300 or 400px wide. And they took the home page and a details page screen grabs from their portfolio and combined 2 images into one thumbnail. The images were positioned one to the right one to the left, but angled (I can't figure out how). And one was over the other a little, but you could see the majority of each image, and there was a cool shadow effect behind both. I really wish I could create something like that myself, but no matter what I try I can't get anything that looks like what I remember seeing. I tried perspective, distort, skew, etc. Just can't get it to look cool and keep the images legible.