VideoStudio :: Where Is The Rendering Info Stored
Jun 5, 2012
I have tried to render the same project to different variants of the AVCHD (i.e. different bit rates ). However once the project is rendered for the fist time the Video Studio some how “remember” what it was rendered to and applies the same settings next time. As a result I am getting exactly same files size, bit rates etc regardless if I choose Mpeg optimizer or custom settings with AVCHD and 18 Mpbs, 20Mbps etc. The only way I can get true different results is when I start a brand new project, assemble it and render it for a first time.
I have tried deleting all cash and proxy files but to no avail. Do you know where this rendering information is hidden and how can I reset it or get rig of it?
View 8 Replies
ADVERTISEMENT
Apr 5, 2013
As I am having problems with a NewBlue video filter (Picture in Picture - see separate post with no replies so far) I would like to find out if video filters (esp NewBlue) are stored in a folder which is not a subfolder of Corel/VideoStudio (and which may not get removed during an uninstall). Where they are located (as I cannot locate them).
View 5 Replies
View Related
Nov 16, 2011
I have setup and renamed the chapters in the timeline using the Chapter Point Manager. I enter the Share section to author the DVD. Create Menu is check marked. I enter the Add/Edit Chapter to Automaticall add chapter info. I click OK and click next to choose a menu template and discover my renamed chapter info is gone and set to the default Chapter 1, chapter 2.........
I go back to the project to check on the chapters points I renamed and discover all the renamed chapters are gone. Is this a bug?
My system is running Win 7 home 64bit
4gb ram
View 2 Replies
View Related
Jun 12, 2012
VS X5 Pro wont render clips totalling more than 6 plus minutes......Gives me one of these 2 errors >frame 724 unreadable, frame 1024
unreadable. I click on OK and poof! everything is gone!!
View 12 Replies
View Related
Oct 5, 2010
Sometimes (only every now and then), when I try to render a project to AVI VS instantly crashes. Lets say I have three projects, project1, project2 and project3. Project1 & 3 will render to AVI just fine, every time. Project2 will crash every time I try to render to AVI. I can render any of the projects to MPG, MP4, WMV, whatever else I want. If I recreate project2 from scratch as Project4, it will then render to AVI just fine. If I remove >>EVERYTHING<< from all timelines in project2, then add a new clip that did not exist before, it crashes when rendering to AVI. Project2 contains both AVI and MPG clips created/captured with VS X3 just a couple of days prior. VS X3 has all the latest updates.
When I say render to AVI I mean I select Share->Create Video File->Custom->AVI and leave it at the default of 24bits, 720x480, 29.97fps, Lower Field First, Uncompressed, PCM, 48.000kHz, 16bit, Stereo. Video on the timeline includes MPEG-2, Lower Field First, 24bits, 720x480, 16:9, 29.97fps, VBR, LPCM, 48000Hz, 16bit stereo and Microsoft AVI OpenDML, 29.97fps, 30532.12kbps, uncompressed, 24bit, 720x480, PCM, 48000Hz, 16bit, Stereo.Although this is a rare occurance, it is a real pain to have to recreate the video from scratch every time this happens.
The computer is a new Windows 7 Pro 64bit, Core2Duo E7500, 4GB Kingston HyperX RAM, 750GB WD Black SATA, Radeon X1550, Asus P5QL/EPU, Pioneer SATA DVD+/-RW, Antec 380 power Supply. Windows has all updates, AV is Microsoft Security Essentials, software installed includes VS X3, Adobe PS Elements 8, Super Video Converter, Office 2010, Nero 8 Essentials, Microsoft Expression Web 3, QTIndexSwapper2, Filezilla, Audacity, Adobe Reader 10 and supporting software that those applications install.
View 1 Replies
View Related
Jul 29, 2011
It seems VS always output a video file with 29.970 fps even if the footage was taken at 24P, 30P. Can video studio output a video that is the same as its capture fps rate?
View 2 Replies
View Related
Sep 29, 2011
I am using VS X4 on windows 7. I have an .AVI file which I captured from a VHS tape so it includes sound. The video is 105 minutes long and the file size is 21.9 GB which is huge. I brought it into a project, edited as necessary including making adjustments to the sound in the AVI file, added titles, transitions, and an additional sound track. When I render this project to make a video file it takes a very long time and the resulting .wmv file is huge (11.2GB). I hate to think what it would be to make a DVD. Is there some thing I should do differently to avoid the rendering time and the size of the files?
View 6 Replies
View Related
Dec 14, 2010
I test at the moment Videostudio X3 and made a small test project. If i produce a AVCHD project i don't have a preview by rendering this project and i can't find a option to enable this ?
View 4 Replies
View Related
May 10, 2012
We are now using Canon X10 HD cameras and recording in h.264 1440 X 1080. The finished product has to be MPEG2 for Public Access TV broadcast.
I can't seem to be able to adjust settings to accomplish this. Both Custom and Movie Template have the user defined button greyed out.
View 11 Replies
View Related
Feb 10, 2012
VideoStudio PRO X3 crashes very often when rendering a VSP-file (with m2ts videofragments) that contains also transions and text.
It happens when I want to create a HD-file (PAL, Blu-ray /MPEG or H.264/ 1920*1080). Disabling SmartRender did not work. Also setting off hyperthreading did not solve the problem.
The problems do not occur when the VSP-file only contains m2ts fragments.
The recommendations given by Corel Helpdesk (download & install VS updates, C++ and DirectX updates) were not very useful because I had already implemented the most recent updates
My current version of VS PRO X3 is 1.6.2.69.
- Does these kind of problems also occur with VS PRO X4 Ultimate?
View 4 Replies
View Related
Nov 30, 2010
i have made a project which crashes in different places every time i try to render. its about 40 minutes long. i have tried removing and reloading pro x2 and cleaning the registery.
View 9 Replies
View Related
Sep 25, 2011
I spent several hours putting together a compilation music video for my first time use in Corel VS Pro X4. When I was finally satisfied with what I'd created, I went to the tab to Share.I selected the setting for YouTube, named the file and saved.It started rendering, reached 21% and then nothing. The rendering box simply disappeared and ceased to do anymore.
I've tried 5 times since to render in different and varying formats, but each time it reaches 21% and then cops out, with the render box disappearing, despite the fact nothing has been touched.
My friend installed the program for me so I could try out hers before deciding to buy my own copy... but if this is what its going to be like, then I definitely won't be spending the money on it.
View 8 Replies
View Related
Dec 14, 2013
My current project (19 minutes long) does not render (Create a video file). It stops after 27% complete and a message window pops up: "Cannot read audio 0x80004005, 18300:8000:192". My project includes voice-overs, sample sound (water flowing and airplane taking off) and some music. By taking out all voice-overs and music, the project renders. I am using VS X4 Pro.
View 2 Replies
View Related
Aug 9, 2012
I don't know if it was like that before, but since X4 I have a minor problem when I start to render a video: The longer the project is, starting from 5 mins, the longer it takes for the rendering menu to appear. I have uploaded a video on YouTube to make clear what I mean.
[URL]
View 1 Replies
View Related
Oct 14, 2009
I have just spent several days putting a project together. Mainly still images with some digital video.
When I rendered the project (pal 16_9 frame based also tried lower first) the result is far from acceptable. It looks like a low res picture although I rendered with high quality settings (the same ones I have used many times before) Straight lines seem to have a slight saw tooth effect. If I utilize an overlay the problem is suddenly much more pronounced. Wether this is caused by the overlay itself or the fact that the images are enlarged slightly I don't know.
The video clips from my digital video camera seem to be ok, the problem being mainly with the still images.
By the way the same images created as a slide show in movie factory are perfect.
I have a fast computer with vista installed and had excellent results earlier in the year with another sinilar project.
View 6 Replies
View Related
Jul 11, 2011
I am currently using a trial version of VS X4 (testing if suitable for our needs) and I am using an instant project that I downloaded in the extras. It was one large picture and then 4 pictures scrolling on the left hand side. I modified it so that I had a background on the main video track, the one large picture a mp4 video captured with Camtasia Studio 7, and three pictures scrolling on the left hand side.
I want to have a 4:3 aspect ratio, as these would be going on a website and need to match previous tutorial videos. The video I put in the overlay track is captured at 1024 x 768 and I have tried a variety of sizes of the back ground, (matching aspect ratio and not) and I cannot seem to find or create a suitable template to create a good quality (I.e. can still read the menus in the window of the screen capture mp4) video. I don't much care what the output type is, as long as it is supported by Camtasia Studio 7 since I render there to create a HTML script, to be used on the website.
View 2 Replies
View Related
Nov 7, 2010
I have a large video file I am trying to render in VS pro X3. The source file is about 3.4 gig. (VHS capture to MPG) I have trimmed out small pieces and inserted a title and a few transitions and I am now trying to rerender it. the process gets to 9% and freezes. No error. It just freezes.
I am trying to output to NTSC DVD 4:3 format.
View 9 Replies
View Related
Mar 3, 2013
I wanted to make a gameplay, with voice-over, but every time I try to render the project, the Videostudio crashes (When I try to reder it as MPG/MP4/WMV, it crashes at 4%, when I try to render it as avi, it crashes at 91%) SP1 installed. Video files and audio files:
Note: The first Windows shows the bandicam-video properties, and the second one shows the screen capture properties. (*recorded)
My hardware informations are on my profile. The Event Viewer (or something like that, I have hungarian windows) says this:
I tried everything, Even recording my screen while playing the project. But the video was lagging.
View 6 Replies
View Related
Feb 28, 2012
My X4 project is done in 16:9 and I can render to MPEG-2 in widescreen but not Flash. I want to publish on Blip.TV and YouTube.
View 11 Replies
View Related
Nov 16, 2010
I have a GoProHD Hero camera, I've been recording stuff mainly in 960p at 30fps because that's all my computer can handle at the moment.
My main problem is that I lose the HD part of the video after edit and render the video in VideoStudio X3. The file type is MPEG4, when I render the final project, I set it to save as the same file type, at 1280x720p with a data rate of 5Mbps all in the H.264 MAIN codec mainly for Youtube uploading purposes.
If I were to upload the raw footage directly to Youtube, it's in true HD and uses the full width of the player when played at 720p. However, when I upload the final project to Youtube even when set to play in HD (720p) it is only in letterbox format.
Am I rendering my projects incorrectly? Why does it keep doing this? Is it some sort of file compression issue or something? I'm pretty new to the whole video editing platform, I'm pretty much learning on my own.
View 11 Replies
View Related
Dec 7, 2011
Why has my rendered DVD turned out to be 'square' looking on our wide screen? I want the video to fill the screen entirely. We have a flat screen LED tv. I set the rendering to 16.9 but must have made a big mistake.
View 2 Replies
View Related
Feb 20, 2012
The audio sounds choppy and I cannot figure out why Im getting it. I'm experimenting with Corel VS to learn how to use it. IF I use audio files ripped from a CD I get choppy audio after the project is rendered to a wmv hd 1080p file. It sounds fine during the preview playback in the project though.
Music that I have downloaded from the web does not do this. I assume I am doing something wrong when extracting audio from disks? I am just using Windows Media Player to RIP the CD's with. Should I use something else?
View 2 Replies
View Related
Jun 21, 2012
I'm using X5 with SP1 on WIn7 SP1 and, only since tonight, the titles on my projects are blocky and ragged not smooth like normal. If I play the projects, they look fine and the title letters are smooth. It's happening whether I do a batch conversion or singly. The projects are 29.97 fps NTSC 480 lines frame based - same as the source clips. Other projects like this have been fine and it's only tonight it's started. I've restarted the program and restarted my OS as well - no change. note my Win7 is in a VMWare environment but the VS X5 program has been working just fine until now. I've successfully rendered over 150 projects all with smooth edged titles on my set up... until now.
View 5 Replies
View Related
May 13, 2012
I created a 30min video, with a lot of photos mixed with live video, transitions, music, etc. Now, when I try to reopen the file for futher editing, it appears the software needs to re-render all the thumbnails in my video track stream. As I mentioned, I have a lot of photos in there, so it's taking forever.
With the previous software I used (Pinnacle Studio), I could flush the cache and have the program rebuild (and store) all the thumbnail info for faster loads in subsequent sessions.
View 7 Replies
View Related
Aug 8, 2013
I am using VideoStudio X6 Pro.
I have been doing video editing for a local kids Theatre company (freebie) and I am not a professional.
They have changed their video camera and they have provided me MTS video format.
Playing the MTS file in windows media player, the video is crystal clear.
It looks ok in VideoStudio but after it is rendered to a DVD its quality has dramatically dropped .... pixilation being the main issue.
I have tried using various trial converters and converting it to an AVI or MPeg2 format first and then editing it but I am still getting very poor quality output.
The final compression is very small (if any) ....
I had about 40 mins of video, so the mpeg2 file should not have to be compressed, but the final dvd was far worse than the actual video file.
How can I get the best results from using an MTS file format ??????
View 8 Replies
View Related
Mar 1, 2011
I was just wondering what effects rendering speed the most, the GPU or the CPU?
View 4 Replies
View Related
Jun 25, 2013
I use VS ver 10.0 and during working on a project there were no problems. I use different files (audio and video) and after rendering lost some mpg audio files. Video is still there but audio is muted. wma and one mpg files works fine.
Project properties:
PAL (25 fps)
MPEG files
24 bits, 720 x 576, 25 fps
Lower Field First
(DVD-PAL), 16:9
Video data rate: Variable (Max. 8000 kbps)
Audio data rate: 224 kbps
MPEG audio layer 2, 48 KHz, Stereo
wma file properties (works fine after rendering):
mpg files, different ones (works fine after rendering):
mpg files (do not work, muted):
Is it possible to save them (muted audio)?
View 7 Replies
View Related
May 15, 2012
I put together some vacation photos in a slideshow. What is the difference in rendering them in "DVD Video" or "DVD Slideshow"? Don't they both do the same thing?
View 2 Replies
View Related
Feb 7, 2013
I am evaluating videostudio 5 and intended to purchase it. However, when I try to burn a disc (br) or render a file, I get the dmp file error message. It tells me to contact corel tech support, but that is impossible. I really like the program, but this is a "show stopper" from purchasing it.
View 2 Replies
View Related
Oct 19, 2012
I have a video that in its native format is 1920 x 1080. I need to add our logo to the corner and I have easily done this. Now I need to render it out into several different formats. Rendering it as an MP4 isn't a problem. However, I can't seem to get anything to work in the WMV category. Each time I try to change the size attribute of ANY of the 'profiles' I receive an Access Denied error from Windows Media inside VisualStudio. After I click OK, it tells me to restart the codec and try again. I can pick any of the profiles and receive the same error.
After that issue is corrected, I have another one that is similar. At the 1920 x 1080 resolution, the black bars occupy quite a bit of the viewing window. I can easily 'crop' them off but then I am faced with the same issue as above. How to I set ANY of the formats (MP4, WMV, etc) to 1772 x 472 as the finished size. None of the file types allow you to change the size. Am I missing a simple step here? I have a feeling I am.
View 6 Replies
View Related
Oct 10, 2010
How to save a transparent video that I can use as a overlay in Proshow Producer?
View 1 Replies
View Related
