VideoStudio :: New Blue Video Essentials IV Don't Appear?
Dec 10, 2010
Last night I purchased and downloaded New Blue Video Essentials IV (Merry Christmas to me!). Installation seemingly went without a hitch. All the new New Blue vft files are in the vft folder. However, in both VS X3 and v10, nowhere do my new filters appear in the FX lists. No Video Essentials IV directory was created, they are not in All, they are not in any of the others.
My receipt states "Registration Information: Serial Number: 12345678910. For those familiar with purchasing New Blue FX, does this need to be registered before it can be used? If so, how do you do it, as I was never prompted to do so?
View 14 Replies
ADVERTISEMENT
Dec 29, 2012
Have a JVC HD Memory Camera GZ-E10. Filled up the SD card and I wanted to upload to the computer. I tried to upload directly to computer and then realized it wouldn't work without VideoStudio Essentials X3. I loaded it and when I tried to upload I get the "either no video capture driver is installed in this system, or no device is connected."
View 2 Replies
View Related
Jan 23, 2013
I just updated my Catalyst to 13.1 and now here is how some of my blues look like: [URL].... how to fix this besides rolling back the driver?
View 7 Replies
View Related
Sep 4, 2012
I have downloaded a TRIAL vers of Adobe Premier Elements 10. I uploaded a vid file and tried to burn to BlueRay. It told me there was no burner location. I know I have got one, so how do I get the prog to recognize it. robo_col
View 1 Replies
View Related
Feb 13, 2011
I recently purchased Video Studio Pro X3 - and after going through the knowledge base and product read me, I have been unable to find an answer to the following problem I have:
PROBLEM:
I have a number of videos (HD 1080p) that I have recorded. Each video is on average 50 minutes in length - what I want to do it to be able to do is to slice this video into 10 x 5 minute videos (based on topics discussed in the video), (so essentially clip the video into these segments and edit each one) and then when producing the video file - actually create 10 separate video files (all with editing in place) instead of one single large file.
As far as I have been able to work out, I need to go through the whole file, clip relevant sections, edit them, and then save project. I then need to go trim the saved file 10 times, to extract each time the single 5 minute video I want to create. This is a fairly manual and time consuming process, hence my hope that I can create 10 files based on the clips I have made in the larger 50 minute file in one go.
as I have 30 videos to edit, so looking for ways to save time!
View 11 Replies
View Related
Feb 24, 2011
I have a LIVE show recorded and I want to add Video Filters in various places within a single 4 minute video. Do I need to cut up my video to segments to add filters too or can I apply them to different spots in a single video?
View 5 Replies
View Related
Mar 7, 2013
I have just installed the new Pro X6. How to get the Newblue Titler EX into Pro X6? The Corel comparison pdf shows that it should work. I still have Pro X5 installed.
View 14 Replies
View Related
Feb 27, 2011
I am trying to use the Blur Out option with with New Blue PIP but all I get is a sharp edge in the VS preview window. In the New Blue filters preview window it looks perfect. Blurred outer edge just as I want.No matter what I try this does not carry over to VS and in playback the object outer edge is sharp.Now the" Blur In" works fine in both the filter preview window and the VS preview window.I actually had this trouble on X3 but dismissed it as I was only playing around but now I would really like to use this effect and I'm having the same issue on X4. How to be able to use the Blur Out in PIP successfully?
View 5 Replies
View Related
Jun 13, 2012
I was trying to use a filter to clean up my audio. The original video was of a chorus concert. I was trying to add the New Blue Audio Polish to add some Ambiance. It adds an annoying clicking sound when using the separate audio track after it was just split. I think the problem might have been that I was using the audio from the AVI rather than a separate WAV file, and also I think Dolby Digital might have interfered.
My findings were that although the audio sounded just spectacular in VS X5 while previewing the entire project, once it rendered to DVD, there were too many clicking sounds.
I was using Dolby Digital for the output. I am rendering a new project with the audio from the video entirely removed, and inserted the separate WAV file I created previously with the New Blue Audio Polish. The settings I used on the filter were that everything was set to zero (compression down to minimum) with the ambiance setting at 85 (about 3/4 around the circle). I played around with it quite a bit, and I hope this works this time. I am keeping the project at LPCM stereo to see if the problem resolves because maybe it was the Dolby Digital causing problems.
I was wondering if I should use the "Interleave audio and video" option in this case.
View 3 Replies
View Related
Oct 23, 2012
I am an avid user of New Blue Effects. Film Effects, Video Essentials V and Stabiliser all appear correctly in the FX Filter drop down box and when one of these is clicked on, the correct New Blue effects display.However, with Video Essentials 111 and Colorfast, whilst they display in the FX Filter drop down box, when clicked on, nothing happens, the effects do not display, they are there when selecting "ALL" so they are installed correctly, Colorfast is not really an issue because it is just one item, but with Video Essentials 111, it is necessary to search through the complete FX list to find the one I want Not sure if this is a Corel issue or a New Blue issue. Using Video Studio X5 Ultimate.
View 11 Replies
View Related
Dec 6, 2012
how proDad wasn't visible. Looking through the X5 install folders, I see a bunch of New Blue filters not visible either. The attached image shows the filters in the vft_plug folder, that aren't available within the program.
View 3 Replies
View Related
Sep 6, 2012
Is it true, with CD Essentials i do not have a 3-point ellipse tool?
View 4 Replies
View Related
Jan 6, 2011
I'm just trying out the VSX3 trial and have some problems exporting.
-Exporting crashed in Blueray/AVCHD, I disabled the HW acceleration on encoder and it seems to work (slow offcourse). I'm using a GTX460 and I saw the solution here
-When I try to make my own export profile I can see only one codec "Ulead Mpeg Now Encoder" limited to 720x576 ...
Is that last problem due to the trial version ? I installed all the last patches and now in version 13.6.2.69. I'm using the french interface but that shouldn't be a problem I suppose ?
PS : The editing features are very intuitive and fast I like it ! But without a good export it's useless
View 1 Replies
View Related
Oct 11, 2010
With VS 11+ not running on XP Home I went to
[URL].......
to download the New Blue Cartoon filter. I Selected the Host Platform as Windows In the free effects set up box VS was already selected Destination folder was designated as prog files New blue free effects for windows.
In the New Blue Free Effects install Assist for VS box it said that the path would be to the vft.plug (via prog filesUL SystemsULVS11). In my VS11+ vft_plug folder-- New Blue Cartoonr,vtf files 131kb and date modified 26 06 2010 showed.
But the filter is not there in the filter library of VS.Did not show on reboot either.I was not asked to register.
View 14 Replies
View Related
Jun 30, 2011
As some know, it comes on the installation CD of PSPX3.
Quite simply, three seconds after double clicking the program icon, I get this. I'm on the second installation. Patches won't install. I get the message " product that needs to be updated not found" or something similar.
View 14 Replies
View Related
Oct 16, 2013
When in Lightroom 4 and i want to edit in photoshop essentials, LR always creates and saves a psd file before opening Essentials. How can I stop this happening because it is a nuisance. For example if I am editing 4 files in PS I dont want LR to create these additional files at all. I am using a PC
View 5 Replies
View Related
Jun 15, 2012
I had installed the NewBlue title Ex which link one gets when one registers VS X5. Since I did not prefer the same (compared to heroglyph) i uninstalled it, but the name NewBlue Titler Ex still appears inthe drop down FX menu tab. Is there some way to remove this redundant entry?
View 1 Replies
View Related
Apr 19, 2012
I wanted to go through all of the Essentials videos for Inventor (URL... ) but every single link listed for the Essentials is broken. Is there another place I can find them?
View 3 Replies
View Related
Aug 16, 2012
i have 1000 eps files to work with and i dont have the time to go to each one and change the color from blue to black! all are different shapes so i need a batch command that will keep the white, white and change any other color to black!
View 1 Replies
View Related
Aug 8, 2013
I'm using PSE 11 on a MacBook Pro. My Blue Skies have too much green in them for my preference. I'm sure there is a way to change this, but how? Also, can I change the default 'blue skies' to something more to my liking for a long-lasting remedy?
View 1 Replies
View Related
Feb 16, 2011
Is there any way to push the video in the video track after the title track is completed ....
View 4 Replies
View Related
May 16, 2012
Ok so i have this image (Attached) im trying to remove the blue rectangle and the white rectangle leaving the blue swirl on the white back ground, iv tried using content aware but it comes out really bad, maybe im doing it wrong will some one be able to look at this for me, maybe it came out wrong because i have the blue swirl and content aware doesn't work correctly with it .
View 7 Replies
View Related
Jul 28, 2011
I'm running Windows 7 64Bit running Adobe CS5 Master Collection. But ever since I allowed CS5 Photoshop to control my printer (HP Photosmart Prem 310-C) to do a test print of a graphic that I created all of my Blues print a violet/blue color, no matter what color blue. It has even affected MS Word & MS Project when I try to print blue colored font or Gantt Chart blues will no longer print blue, but will print the same blue/violet color. I've even tried a brilliant blue which will all view great, but prints the same shade of violet blue! All my colors and Blues will view great! I've calibrated my monitor and I've reset my printer several times and still the same thing! I never had this problem before I downloaded Adobe CS5! A strange thing is that I can run check printer test and the data & image that is stored in the printer will print blues perfect, including running a copy direct from the scanner bed and it will produce perfect blues. I almost feel as though Adobe CS5 has possessed my PC and printer, how do I get it back to printing like it did before installing CS5 Master Suite?
View 2 Replies
View Related
May 30, 2011
Is there a way to set 20 fps for my video in corel video studio x3 ?
i made a 3d animation and rendered about 3000 single frames as .bmp . Now i want to put them together to a video. the speed of the animation is preset, so i need every frame to show up for 0.05 second..... 20 fps not 15, not 24, not 25 and not 29.97, but exactly 20 fps. i don't know if i am just very stupid, but i can not find the settings for this.
View 2 Replies
View Related
Jul 25, 2011
With the installation of SP1 (VSX4), the options to create a blu-ray video file (assuming 1920x1080 only, though the same options exist for 1440x1080) are now:
Blu-ray (1920 x 1080)
Blu-ray H.264 (1920 x 1080P)
Blu-ray H.264 (1920 x 1080)
Now, I want to create a 'standard' Blu-ray disc of family videos. My camera is a Canon Vixia HF20, recording in 1920x1080 in the '60i' mode. The camera creates AVCHD formatted files. I know I don't want the progressive option, however, what is the difference between the other two options (is it MEG4 vs. AVCHD? If so, what should I choose when creating a new disc?). I want my disc to support as many blu-ray players and HDTV's as possible since I will be giving copies to various family members (meaning I don't want a format that supports only the latest releases of blu-ray players).
View 9 Replies
View Related
Mar 28, 2013
Can it actually be done? If I so much as drop 3D file onto the timeline and tag it as 3D (SBS L-R in my case), I get the "... lost 3D attributes..." message when I try to create a 3D file. I tried tagging a 2D file as 3D for S&Gs and got the same result. In case it matters, the files are in .avi format (and even rendering a 2D version of these makes a jumpy video, but I digress...).
View 9 Replies
View Related
Mar 3, 2013
Is there anyway to convert the video to 4:3. When I save it 4:3 file it doesn't cut it down. It makes the video look back. Can I cut the outside edges to make the video 4:3?
View 3 Replies
View Related
Dec 18, 2010
I just purchased Video Studio Pro X3 and I love it . In my opinion it is possible to capture video from the video camera. I have a JVC HD camera
This the camera I purchased.
[URL]......
I would like to hook my camera up to my computer
[URL]........
How do I do this. Now of course my camera records off an SD card and I can just stick it in there and edit. The reason I am hoping I can capture video just like I can with a webcam is because the view screen on my camera no longer functions so therefore I can only point in my general direction and center up the shot in post edit.
View 3 Replies
View Related
Feb 19, 2013
When I record in 720p @ 30 FPS my raw files are usually around 30-35kbit rate, however whenever I compress the videos they seem to drop to around 18k bitrate which really put my videos below the standard I want. I've tried to add my own compression templates but whatever I do, I can't seem to get any of the compression options above 20.000 bitrate.
I have tested with Sony Vegas and with that I can pretty much choose myself what bitrate I want it to be. Although I know Corel a lot better and its easier for me to do what I want with it.
- How can I compress my files with higher bitrate? I want it around 30.000k.
View 1 Replies
View Related
Aug 25, 2013
Is it me or am I really seeing that X5 has LESS video encoding options vs X4? Really? I remember having lots of choices and options as far as how to encode MP4 the size (or ratio, etc 720 vs 1080p)
I can't seem to get 1080p but I can get 720p but in X4 I recall I could do 1080p for MP4 though.
View 5 Replies
View Related
Nov 27, 2010
I'm new to video editing and am using video studio Pro X3, everytime I edit some video or want to use a clip. The trimmed video always flashes the first frame at the start and finish of the trimmed clip. Also when I add a subtitle or text in the time line, that first frame flashes by at the beginning and end of of the text. This is very annoying and doesn't look very good in the project. How can I remove this first frame and how do I prevent it in the first place??
View 1 Replies
View Related
