VideoStudio :: Make Smart Proxy In ProX4?
Nov 17, 2012
I have heard it takes some time to make a smart proxy file, It seems to take a very long time although I dont know what is reasonable with my computer, intel2.2g proc-4g ram-64bit-win7. The files are h264 mp4 720x1280HD 60fps. Is it because they are mp4 files? I use WMM6 and have to convert to .wmv but editing is fine afterward. I have also tried Video Pad and there seems to be a short wait for loading but nowhewre near as long as VS. Is there a better format for Video Studio than mp4.
View 4 Replies
ADVERTISEMENT
Jan 21, 2013
Mediastudio 5 pro ultimate
Win7 64
AMD 960T on six cores
Asus M5A78L M LX +
8 GB
HD 3000 integrated graphics
OS is installed on a 128 MB SSD
Project target file is on a 500GB WD Blue.
I have ripped a Blue Ray DVD as an .m2t, at an average bit rate of about 18.5 Mb/sec, with a resulting file size of over 16GB. Needles to say this file bogs the machine when not running the proxy. When I finish a session and close the program, the proxy file is gone the next time I open the project. The same thing happens when the machine goes to sleep with the project open. I have to either slog through working directly on the project without the proxy while it slowly rebuilds, or wait a couple of hours for the rebuild to complete.
Any way to stop the file from being deleted? I went to power options and selected never, but the next day it was gone again.
Another thing would be to increase the speed of the proxy creation, as it only uses about 20% of the CPU. Better to get it done faster... I have tried raising the priority of the process to high with little if any change.
View 1 Replies
View Related
May 6, 2013
When I ingest tape, I always turn off as many resources as possible, internet, virus, etc. When capturing with videostudio pro x5, if i select smart proxy prior to capture, i get skips that appear like dropped frames. If i turn off smart proxy, then capture, than start smart proxy queue, all is fine.
View 4 Replies
View Related
Feb 28, 2012
Is there some reason why Smart Proxy files would not be generated with .MOV files?
View 1 Replies
View Related
Jul 21, 2011
Using Smart Proxy ,to show the Smart Proxy have been created , a small double icon is placed within the thumbnail in the folder and also in the clip on the timeline . The clips in the project are playing smoothly. But when I close the project and re-open it later on, I notice that the small double icons have disappeared and the clips on the timeline are no longer playing smoothly but jerky.It seems as if they are no longer smart proxy files although they are still in the Smart proxy folder.
View 3 Replies
View Related
Jun 7, 2011
I did some filming today, using my Canon 5D MK II, converted the MOV files to AVI using NEOscene, then ran them through smart proxy in Videostudio PRO X3. When I started editing, I noticed some files were causing the project to freeze and stutter on playback. On closer examination I noticed that about 10 of the 40 or so files had not had smart proxy files created, and that all of these were above 1GB in size. Is this a glitch, or is it just something Videostudio can't do for files that large?
Sony Vaio laptop
Intel Duo Core 2.2ghz
Windows 7 home premium
64 bit
4GB Ram
Ulead version Pro X3
View 5 Replies
View Related
Jun 17, 2010
I've been a happy user of VideoStudio for a while now, up until the X2 version. Hesitating on upgrading to X3, I tried the trial version on his launch (now expired and removed, so, I can't speak for the latest SP version). Reason I decided not to upgrade, aside from the apparent lack of really new features from my point of view, is the smart proxy configuration, which seems to have been downgraded.
When overtime I started editing HD videos, I decided to push smart proxy in VSX2 to best fit my needs. For that I evaluated the speed of the various codecs available, and came to the conclusion that the free commercial DivX codec (which really doesn't have my preference for any other purposes), configured in low quality settings and reasonable res, was the perfect candidate to generate my proxy files (poor rendering quality but fine for editing, and amazingly fast at generating my proxy files while taking the best out my quad core CPU). For the final rendering I could then use the compressor of my choice (x264 in general).
Did I miss something, or has the possibility to manually select the codec and compression settings for smart proxy simply disappeared in VSX3? Has this been corrected in a SP since the initial launch, or is there any plan to change that in future update?
View 3 Replies
View Related
May 26, 2012
Given my problem with jerky video in VS4 (see this thread), I decided to give Smart Proxy another try and switched it on. To my dismay, not only does it take ages to render the proxy videos, but the computer seems to be rather underused during rendering.
VS4 took two hours to create the proxy of a 20-25 minutes 1080p file, 4GB in size. During this time, according to Task Manager, only four of my eight CPU cores are significantly busy (though still below 50%), and disk I/O is in the area of 6-700kB/s for either direction. I took care to put the proxy directory on a third disk - away from the operating system and the source videos. 25% of the 8GB memory is used.Would the smart proxy rendering process make more efficient use of the available resources, it wouldn't take half the time.
VS4 configuration
VS4 service pack 2, version 14.2.0.23
Hardware acceleration is set for both editing and file creation
The video material is 1080p, 59.940 frames/sec, variable bit rate (max 26000kbps) and comes from my Panasonic camcorder. I used the tool that came with the camcorder, HD Writer AE, to copy the files to the hard disk. Audio is Dolby, 48000Hz, 256kpbs (I have no problems with audio).
Project properties:
NTSC drop frame (29.97 fps)
MPEG files
24 bits, 720 x 480, 29.97 fps
Upper Field First
(DVD-NTSC), 16:9
Video data rate: Variable (Max. 8000 kbps)
LPCM Audio, 48000 Hz, Stereo
View 2 Replies
View Related
Oct 20, 2011
As I updated to a new camcorder (Sony HDR-CX130) and computer, I have a question about VS X4, that I am using.VS X4 is presented being a kind od ideal editing HD/AVCHD. I started to edit my MPEG-2_TS files with the presumption that I really was editing in HD. It goes quite well on my new PC, without Smart Proxy turned on! In the future I want to burn them on BlueRay-disks. Therefore I want to save my new projects in HD-mode.
But then I took a Look at the Project Properties and it is defaulted to MPEG-files 720x576 pix; SD-resolution. It seems that it is not possible to insert a Full-HD template or Full-HD-matching parameters. Media-type can't be changed to anything else then PAL-DVD.
One other issue then is that I use to use slow-motion and stills in my video-projects, for action-shots. Then I saw also that the stills (Snapshots token using 'Edit>Snapshot' (Correct? I use the dutch version)) don't have 1920x1080 pix, but 1024x576 pixels instead.
I searched the forum and found this topic about the project properties vis-a-vis HD-editing: URL....As far understood, the projectproperties don't matter that much, all material will be rendered Full-HD (upscaled?) in the share-step when selecting BluRay-disc or AVCHD-Video File. Then my questions:
- What is then the use of Smart Proxy and the Project Properties-Dialogue?
- Will the stills be upscaled, so they integrate seamlessly in the endresult?
- Is there a way to change the videostill/snapshot resolution to Full HD?
View 4 Replies
View Related
Aug 14, 2011
I'm using VSProX4 in English,while my native language is Dutch . I wonder if it's possible to change the language to Dutch(NL) and if it is,how to do that.
View 10 Replies
View Related
Jul 17, 2011
1. whether VS Pro X4 can run under Windows 7 Pro 64-bit?
2. Does VS Pro X4 has both 32-bit and 64-bit versions selling in the retail market?
View 6 Replies
View Related
Jan 12, 2012
I have purchased a Sony DCR TRV480 to play Hi8 tapes and convert to Digital Video. My camera came with a USB cable that plugs into the camera in the video jack. I want to capture the video using VSProX4. What do I need to do to capture it? Do I need a driver for the USB. I dont seem to have a firewire jack on this computer but it does have a 1394 labeled jack in the back. It has several USB jacks.
View 6 Replies
View Related
Dec 28, 2011
Since I am unable to burn DVDs with my current computer drive I want to burn them on another computer using the VSProX4 software. Also the video quality of the DVD I burned on this computer is poor. What is the easiest way to burn them on another computer? Should I create DVD folders or create disc image or just copy the files in the Corel VSPro folder on Documents and transfer it to the new computer. I rendered a video file from my project and it is saved in my projects folder in documents.
View 14 Replies
View Related
Jan 20, 2012
Just installed ProX4. When I make a title - either single or multiple - and try to apply a Border/Shadow/Transparency to the text, I get an error message that says . . .
"Encountered An Improper Argument"
Making the title was the ONLY thing in the project.
View 8 Replies
View Related
Apr 7, 2011
I'm about halfway through my 30 day trial of VS Pro X4, and starting to feel a little more comfortable with the software, but a few things are still puzzling me. Granted I've only scratched the surface of the SW capabilities so far.
I took the plunge and got a new Panasonic HDC-TM90K HD video recorder to replace my old 8mm analog Sony. I've only had the opportunity to use it several times, so far so good.
The Panasonic camera comes with HD Writer AE 3.0 software. Pretty rudimentary compared to VS Pro X4; does the basics, trimming, titles, transitions etc. Not bad, it works, but definitely not as sophisticated as VS Pro X4. However I need software that can capture the 8mm tapes I'm converting, which the Panasonic SW cannot, really don't want to learn/use two software packages so hence trying to focus on VS Pro X4. See thread viewtopic.php?f=1&t=41255 for my question re: mpeg compression.
Using the Panny HD Writer SW I was able to capture and burn AVCHD DVD's from the Panny camera SW without issue, not too difficult considering this is my firt time doing all this stuff. AVCHD DVD's play just fine on my Sony Blu-Ray.
I tried capturing the same video content from the Panny camera with VS Pro X4 and could not. VS Pro X4 is stating there is no camera attached. I believe the Panny SW is hijacking the USB connection first and hence is controlling the connection to the camera. I tried looking for some services that the Panny SW has running and closed the auto-run of the Panny SW, but still no luck. I haven't tried uninstalling the Panny SW, that's next.
I was however able to import the files from the Panny camcorder using the import function in VS Pro X4 by selecting the files I wanted. Imported files are the exact same size as the files imported in the Panny HD Writer AE 3.0 SW.
Was able to make a simple little video by adding a title, couple of transitions between clips etc, couple of chapter markers. All went fairly well. Then did "Share > Create Disc", used the default (only) disc template that came in the VS Pro X4 SW trial, selected AVCHD and burn disc, no issues, until I went to play the disc in my Sony Blu-Ray. Once the action in the video picked up and there was significant motion in the video the video started to break up, don't know the technical name for it, digital artifacts maybe? It doesn't look like the deinterlacing examples I've seen, which appear to be unaligned thin lines, this is more blotchy, like blocks of data not being filled in.
So then I tried it again and selected 2 pass conversion, this time it worked, which is good, but does that need to be done anytime your burning HD content to a AVCHD DVD?
View 8 Replies
View Related
Oct 16, 2010
I've been using Video Studio X2 with proxy enabled to edit my HD video.When I had my HD video files on USB hard drive connected to my laptop, everything worked fine.Last week I bought a QNAP NAS to store my files and share them throughout my home network. My HD files are now stored on this server.My laptop connects to QNAP through a WiFi router with real maximum bitrates of about 20Mbps (DVD video files have bitrates of about 10 Mbps).
I've created proxy files stored on my laptop local hard drive.My playback method is "Instant playback"
2. Problem:When I play a clip that as a Proxy file associated, Visual studio connects to QNAP and tries to download a large file (I suppose de original HD video file).Connecting my laptop to QNAP by Ethernet cable and monitoring download bitrates, the result is 40-50Mbps (in line with HD video file bitrates), above WiFi speed!Connecting my laptop to QNAP by WiFi, Visual Studio plays with annoying frequent gaps!!Why does this happen? Is not proxy file intended to play instead of the original file?I supposed that playing a video clip with a proxy stored on my hard drive, Video Studio didn’t needed to download anything from QNAP!
View 2 Replies
View Related
Aug 20, 2011
Corel videostudio does not create proxy files.I bought pro x3 in february, but did not install it before yesterday. I installed the version linked in the purchase email from february 2011. I have not installed any updates or patches, so the version i use is Corel VideoStudio Pro 13.6.2.36
Settings:
- Corel is installed on c drive
- proxy folder is set to a folder on my d-drive
- Just to be sure to create proxy files, i've set: "Create proxy when video size is above 352 x 240"
- I have checked "auto generate proxy teamplate"
- i have checked settings-smart proxy manager-enable smart proxy
I have created a new project and added 2 files.
file1.AVI
video compression: MJPEG compressor
attributes: 24 bits, 1280 x 720
total frames: 340
file size: 41 738 KB
file2.AVI
video compression:Microsoft DTV-DVD Video Decoder
attributes: 24 bits, 1920 x 1080
total frames: 222
file size: 13 061 KB
I select both files, right click and choose "create smart proxy file"I open the "smart proxy queue manager" and i see the two files dissapear. However, they just fly through as nothing is really done with the files When the files are gone from "smart proxy queue manager" i open "smart proxy manager", and there's no files here. There is neither files in the proxy folder i've chosen.
I've also tried to play the video, hoping the files will be created automatically. I've tried to create the proxy files after installing the patch for pro x3.I've tried to reinstall videostudio.
I still can't get the proxy files, which means i can't edit the video either. When i preview with the editor, it stops all the time. The thing is, i managed to create the proxy files a year ago when i first tried the x3-version, and that's why i bought the product.how i can make it work?
View 14 Replies
View Related
Sep 13, 2010
Videostudio has left a lot of large proxy UPX-files. What happens if I delete these files to recover the disc space? Will VS create new ones if necessary?
Hopefully I can delete them, but if not can I move them to another disc?
View 7 Replies
View Related
Sep 30, 2012
I change my clips to proxy files and editing goes fine but if I am making a video that goes on over a period of time and I have to load the partly made video again the clips no longer show as proxy files. If I look in my proxy folder they are still there but do not seem to have been loaded into the edit. I am using XP.
View 11 Replies
View Related
Oct 1, 2010
I've been doing some MTS editing for my boss, and have been using the proxy file feature as my PC doesn't run the videos properly without using DXVA (would be a nice feature, by the way. my media players use DXVA just fine but VideoStudio won't let me use it's hardware acceleration.)
Anyway, when I finish up for a day and save my project, render the final files, and close out the program, my proxy files get deleted by the next time I load it up. I can use these still, as I often need to go back to change things in the edit, and remaking them every time is kind of a waste of time. Is there a setting somewhere I am missing, or does VideoStudio just always delete these files when it decides to? I'd like to keep them around and have them selectable and usable as long as I say, not how long as it says.
View 4 Replies
View Related
Mar 2, 2012
I prefer using the proxy workflow for fullhd editing because it allows fast timeline scrolling. My video rushes are all on external disks. Creating a project and proxies is no problem (takes some time). The problem however is, when I re-open VS with a project for which I created the proxies before, while the related external disk is not active (removed), I still get the tumbnails in the VS library, but I lose the proxies even after the external disk is being restarted. The strange thing is that the proxies (.upx files) are still in my proxy folder (local disk) when opened in Windows, but the VS proxy file manager doesn't see them anymore. Is this normal?
View 2 Replies
View Related
Oct 3, 2013
I use proxy files for my AVCHD editing. One of the options in the compression settings relates to " quality vs speed". Imo Proxy files are working files which content is not used for the final rendering. what the meaning / consequence is of the quality vs speed choice?
View 3 Replies
View Related
May 28, 2011
Loaded a MPEG-4 Media File 3Gb, went to setting, clicked on Smart Proxy cue manager, waited 40min and clicked ok. I check my Smart proxy file manger and it was there. My power went out, when I reload CV my files in Proxy manager were no longer there, and my file is back to being slow and jerky, that means I have redo this again.
does this mean I have to cue manger every time I wish to work with the same file?
View 7 Replies
View Related
Sep 11, 2012
I just today discovered how to generate proxy files from already existing clips that were loaded into my timeline.When VideoStudio ProX5 was done rendering all these timeline clips to the 'file manager' list as proxies, I closed the program and re-opened it.Everything was still in there but I did not notice any difference in resolution(it was still hi res) and the playback of the preview window was still very 'laggy'. Any way to allocate these newly created proxy files into my timeline as the workaround for smooth editing where I can later finalize/render the project down to hi res using the original source files?The project is very clip intensive with lots of overlays and effects.
As a note, I've made these proxy clips at a very low resolution so I would notice a big difference if they were being used instead of the current clips >all sliced (already in my timeline.)
View 1 Replies
View Related
Sep 4, 2011
Unfortunately, in my project which includes HD files, proxy files are not created automatically after capturing, even the "create proxy files" is checked. So to get the proxy files, I have to select all the clips in the timeline and right click to check "create proxy files". What I have to do in order to get automatically the proxy files.
View 8 Replies
View Related
Apr 1, 2011
If I have project properties set to anything but the default, I am unable to scrub through a clip when in clip mode if the clip has the second icon indicator, as shown in the screen grab below. This second icon (double diagonal frames) does not appear immediately. Before it appears, I can scrub in clip mode, but after it appears, I cannot. What that icon represents? My video files are from Canon HV20 (m2t 1440x1080) and my project properties match them.
I have a suspision that it has something to do with proxy files, and that once the proxy file is made, I lose clip scrubbing.
I just tried turning off smart proxy, and wouldn't you know it, I can scrub in clip mode.
I restarted X4 and clip scrubbing is fine. I enabled Smart Proxy, and clip scrubbing doesn't work again.
View 3 Replies
View Related
Feb 27, 2012
want to upated attributes in proxy entity is this possible?
View 1 Replies
View Related
Apr 10, 2011
I have a question regarding Smart Sounds. Video Studio Pro3X had a "library" of smart sounds that allowed one to create music clips to match video duration. When I installed X4, I noticed the auto music function was not enabled. I also discovered that when smart sounds 5 tried to update in X3 that it maintained that it could not find the source file.
View 5 Replies
View Related
Oct 10, 2013
I've been downloading a few mock-ups to use in my portfolio and I want to start to make my own for some that I can't find on the web. I've manages to make a realistic looking asset for what I want, but I don't know how to add text and stuff to it. Usually, when I open a downloaded mock-up PSD I just double click on the smart object, edits the contents hit save and BOOM done it's at the perspective for whatever I am changing.
However, I've made smart object and I'm trying to edit the contents so when I double click it just opens the object again and whatever I ad will add, but it doesn't save at the perspective. i How do I make a smart object to edit contents (text, images, logo, etc etc) on a plain PSB or PSD so it saves at the angle or perspective I want?
This is my design before I double click on the smart layer
Here is the image when I double click the smart layer (not exactly what I want).
Here is a mock that I downloaded after I double click the next pictures show's what I want.
This is what I want to do in my original design, but how do I get the text to do this with a smart object?? I want to edit text in my design and apply it (not necessarily this design, but my own) to my smart object (first image) I created in photoshop. How do I do this?
View 8 Replies
View Related
Oct 29, 2013
I have an item in my layers and want to make it into a smart object, when I right click that option does not come up. To make into a smart object does not come up anywhere in my layers tab.
View 2 Replies
View Related
Nov 3, 2013
I watched a tutorial about how to make smart collections using keywords.I spent a couple hours selecting the photos (using the paint can, good tip) and giving about 700 photos the keyword "use". Then I went to make a smart collection and discovered that it only allows you "any text field" with no reference to keywords. Many photos in my huge collection have the letters "use" in their titles.So is there no way to select keywords as a basis for smart collections????
View 4 Replies
View Related
