VideoStudio :: (Bonus Content) Importation To Library?
Jan 1, 2012
I've just purchased VS Pro X4 and installed it successfully (I think). My question is; the "Bonus Content" has been placed in the My Documents folder. If I remember correctly, (memory was affected quite seriously), I then import these into the library. What I'm not sure of is how to set things up to keep the subfolders in the library structure ie: There are three categories,Audio, Image and Video, then each of these has sub categories to organise the clips into subject. Is there any way to import and keep the structure intact.
I have recently installed VideoStudio X4 Pro, and have been a very long time ULead VideoStudio user. I am looking for video content templates similar to the templates that came in the Ulead days... You know the video themes, templates (unable to paste a screen shoot) etc.
In VideoStudeo 11.5+ it came within a bonus content pack. Is there such a thing for X4?
I just got VS Pro X3 yesterday and installed it from the disk. All went fine, but there is a menu option on the disk for "Bonus Contents". When the menu option is clicked, it displays three sub-categories - Audio Clips, Image Clips, & Video Clips. When each of those sub-categories is clicked it opens a Windows Explorer window showing the contents of the folder on the install disk. I can't find anywhere that these clips got installed onto my PC.how do I install this Bonus Content, so that VS X3 can use it? If I just copy it to my hard drive, what folder to I place it into?
if i have created a custom content center library, where all content center parts use my material "Steel XYZ", is there a way to use it in old assemblies that use a no custom content center library?
I mean, i have 100 assemblies that use bolt with Steel Mild material... can i change that material changing the content center library and using mine that use "Steel XYZ"?
I'm trying to fix up the iproperties of a content centre item. However the part has been used before and saved in Vault. I have edited the library and then when I tried to use a part from the library, the part is just pulled from Vault, hence not having the edits on it. I tried a part that hasn't been used before and it works ok. How can I force it to rebuild from the content center so I can save over the copy in Vault?
how I can install the 'Other' library content into the Content Centre?
I need the Australian Standards content but I was unaware that it didn't install automatically when I installed Inventor software, and from what I've read it's contained in the 'Other' library which I was also unaware you needed to install.
How can I solve the problem without uninstalling/ reinstalling? I'm using the downloaded Student version.
I created custom library by coping iso read only library. Then edited custom library family table and created extra columns (for custom iproperties) for company purpose BOM. This columns needs to be updated from time to time with new part numbers.
When I update part numbers and hit apply it tells me that published successfully to selected library. Then i go to iproperties of updated parts and this update is not showing up.
We currently use AC 2012 Mech.when selecting from the menu content/fasteners/screws and then opening the countersunk head types, many users will see what is dispalyed in the attachment good picture.png... the type of screw is displayed (we can see the text)...while other users selecting the same prompts from the menu will see what is displayed in the attachment bad picture.png... the text is NOT displayed...this occurs for many different types of content, not just the fasterners/screws...
I created an assembly on my computer and some of the parts used are standard parts from the content centre. Now I need to send that assembly as an email. I sent all the associated parts and files but the receiver still can't open the assembly correctly due to the parts from the content centre.
I have used the Content Browser sparsely in the past to drag and drop items to a tool palette....but I was thinking it may be a go location to manage our detail library....
As a test i had tried to drag or copy past autocad details into the content browser with no success. I suppose there is a process to make linework usable for the content browser.
Do i need to convert the linework into a multi-view object and then drag it from the style manager into the content browser?
How can I have a component from the content library have its 'BASE QUANTITY' default to 'EACH' when I bring it into my assembly? Each time I have to reset this to 'EACH' when inserted into my assembly.
This happens in either frame generator or just placing from content center.
I am facing problem with editing content center library. Find attached file for more details. soft ware is asking for read / write library. I have 2011 version there is only read only option.
If you forgot to install DIN libraries during your original configuration:
Directly from your installation media, copy the relevant IDZ file to the Content Center library location on your PC. The IDZ file is an archived (zipped) IDCL file.
The question is, how I supposed to extract this zipped file?
I'm trying to automate my drawing creation but i've run into a problem. In my code it takes the document collection object and iterates through and creates a drawing for each part and assembly the problem is i need it to skip the files from my library and content center since they dont require drawings. Here is the
Public Sub CreateDrawing() 'get documents collection object Dim invDocs As Documents Set invDocs = ThisApplication.Documents 'iterate through documents in collection [code]........
I typically use basic ISO fastners in conjunction with the bolted connection generator. Just now I have discovered the ability to add a custom library to the content centre. This appears fantastic as I no longer have to sift through the 10 - 30 or so items available in each category to complete my bolted connection.
However I am experiencing a delima
I have created a custom library called "My Favourites" and it contains 6 bolt families, 1 spring & flat washer family and 1 nut family. All families are derived from the ISO standard (bar the spring washer which is DIN 128) and all thread pitches for the respective nut and bolt connection(s) match.
The problem I am experiencing is when I execute the bolted connection command I can add the bolt, 2 flats and 1 spring washer yet when I come to close the connection with a nut the nut selection box is empty?
I have the active project configured with "My Favourites" "Inventor Feature" & "Inventor Routed Systems" as the only in use libraries. Secondly, I have verified the existance of the nut(s) in "My Favourites" in the Content Centre Editor.
I am using Inventor 2010 updated to SP3 on a standalone machine, running Windows 7 Ultimate (w/ latest updates)
I'm having some problems giving certain parts in my assembly a unique file name. Im reorganizing all of my projects in a
- content center - designs - libraries
way, where my projects are under designs and commonly used parts under libraries.
Now i have something like a pump. I can derrive this assembly into a solid and put it in the content center, or keep the assembly and put it in the libaries folder. since this is a part i use in multiple projects.
Now my problem is that this pump has a different name in every project, and a library part doesn't allow me to change this name. Say standard name is "centrifugal pump" while the name in project 1 would be P101, while in project 2 it has to be named P501 and so on in order to match with the flowcharts.
Is my only option here creating a solid out of these components and putting it all in my content center ( leaving my libraries folder totally empty ), adding it as a custom part afterwards ( so i can rename it ). I rather have it in my library folder, since this will keep my design folder organized without hundreds of duplicates of this pump, using different names. Besides i rather have it as an assembly so i can assign the connecting tubes of the pump to different sub assemblies of piping.
Different example, a butterfly valve excists out of 3 parts. the valve itself, and 2 connecting tubes. possible to dissemble. all 3 parts need to have the same file naming say XV900. 1 side of the valve needs to be assigned to pipe-01 while the other side of the valve needs to be assigned to pipe-02. Content center doesn't allow me to split files, but allows me to use unique file names. A library party allows me to split files ( if not read only ) but doesn't allow me to change names.
Because my company is setup such that it has 3 companies operating under one roof and multiple MRP systems we have components that could have different part numbers depending on which company is in posession of it. As a design Engineer I need to be able to produce production drawings for all 3 divisions and provide production personnel the appropriate part #s for the items depending on where in the process the item is.
The Eng. Dept. acts across all companies the designs are controlled in a single place. I have created Custom Content Center Libraries for the different companies for standard items like nuts, bolts, etc...
How can I choose which Custom Conent Center Library my parts come from?
2013 Product Design Suite Ultimate Windows 7 Sp1 Intel(R) Core (TM) i5-2400 @ 2.00GHz 6.00 GB of RAM AMD Radeon HD 6570
I had a ipart that i already published into the content center library, how do i go back and edit the model? not all the published data but the ipart model its self
I have just had to re-install my copy of X5 Ultimate as for some reason the files stopped working..
When I first started the software it told me there was a service update (previously installed on last install and worked fine) but when I clicked on update now it just closed the window without doing anything. I have downloaded the patch from Corel and that installed without problem.
But now, on looking in the 'do more' section there are only 3 items, Boris, Newblue Effects and Jamendo. (I have the first 2 as part of the ultimate edition anyway). The templates and other downloadable content are missing.
Updated from X3 to X4, did you notice, or can you, keep all your older libraries, transitions, effects, templates, etc. from X3 into X4?
I know in previous updates all installed items did not migrate to the newer version. Wishfully hoping X4 will migrate from X3 vs another "Fresh" install.
With X4, can you author an AVCHD disc with 720x480 content in H.264 video and AC3 Audio and burn it to a DVD that would be playable in a Blu-Ray player? Because my thought was with an 8.4 DVD disc you could fit a lot more TV shows on one disc, vs backing them up in DVD in Mpeg2 format. In fact with a 25GB Blu-Ray blank, you could probalby get a whole 22 episode season on one disc.
I have it installed, I have the plugin "loaded" and "auto-loaded", but when I try to import a .3ds file, there is no geometry or anything. I see "Transform1" in the Outliner, and I don't really see any errors.
I tried playing around with windows, hit "show all" on everything I can find.
I am attempting to import audio into VS5. The file is named VTS_01_3. I have the music file as MPEG layer-3 audio [MP3]. The music plays fine with AVS and Windows Media Player.
The music was ripped off of a DVD initially but appears to play OK but on attempting to bring it into VS5 using Import from Digital Media I get the dialogue box "There is no valid content".
