Revit :: Add Parameters To The Project Information List?
May 17, 2012
Is it possible to add parameters to the project information list? For example I am using the project address parameter in my sheet borders for the full street address of a project. However on the cover sheet the project address is listed as ciry and state only. I know how to create a label parameter for the address on the cover sheet, but I would like to add that label to the project information family to keep all of that information in one place.
View 3 Replies
ADVERTISEMENT
Sep 28, 2012
How do I apply a Project Parameter (not Shared Parameter) that I created in Manage> Settings > Project Parameters to an existing element.
Following the instructions under Creating a Project Parameter in WikiHelp for Revit 2013, I created a Project Parameter called "Equipment ID" (common, text, text) in Manage> Settings > Project Parameters. In the process I clicked the Modify button and assigned it to all Categories by checking all boxes. However, when I opened the family editor for a piece of electrical equipment, selected an element (an extrusion), and then went into the Family Types dialog and clicked Add Parameter, it did not give me the option of adding Project Parameters, only Shared Parameters.
WikiHelp, under "Project Parameters", states "Project parameters are parameters you define and then add to multiple categories of elements in a project", but does not say how to "add" them to the element and doesn't direct me to another section that dose.
View 9 Replies
View Related
Feb 25, 2014
Is this a Revit Hard Code issue or am I overlooking something? I have created some In-Place Masses (with floor mass for each level) and I have created 2 Project Parameters for for the Mass Schedule. Parameters are Block and Sub Block as Text under Identity Data and in the Mass Category. When the Mass Heading is ticked all mass categories are ticked. So Im thinking, it should not matter what type of Mas schedule I setup. The Parameters should be available in the fields.
The Schedule is created as a Mass Schedule. and the Parameters show up in the field and data is populated as I expect.
I want to create a Mass Floor Schedule and the parameters are not showing up in the fields list. Also I can not Add Parameters from the Schedule dialogue window as those Parameters has already been created. When I select the Mass Floor in a 3D view the Identity Data fields in the Properties window are mostly greyed out. The Project Parameters do not appear as Identity Data fields and the Edit Type is greyed out (not that Edit Type maters but it adds to the thinking process)
View 8 Replies
View Related
Jul 25, 2013
I am opening my project on a different pc than I started the project on. Some elements are missing such as materials, material jpgs and decals. Is there a way I can generate list of my custom elements that I need to somehow transfer to this other pc rather tracking manually. When I transfer my custom materials to the other pc how do I get the element to automatically read the material.
For example, I have kitchen cabinets with a custom paint color. I can transfer the paint material to the other pc but the cabinets don't recognize it automatically. I have to choose the cabinets and re-assign the material even though it is in the material list.
View 5 Replies
View Related
Apr 26, 2012
I'm currently using Inventor 2012 and i need a macro (code): I want to know if it's possible to export all the information from the parameters list (everything, names, values, tolerances, comments...) to an excel spreadsheet or a txt file (it can be a table, or a CVS file, i just want that information!), from a part file (.ipt) or a drawing file (.dwg).
Currently, i can only export the parameters' names and values , but i can't get to the tolerance values and comments . . .
View 9 Replies
View Related
Sep 9, 2011
I used railing tools and created railing in the project files. i want to change rail and Baluster.i created metric baluster and rail from family and saved in the local drive. i used in to my project also it is working fine.
i want to use this railing to some other project. how to get it either copy past or revit link or any other way because the railing created in project file.
View 1 Replies
View Related
Apr 29, 2012
I am finally getting time to do some organizational cleanup and management with our templates and vault settings. Many of the things are items that I am altering for each drawing/model I make and I would like to make them "stick" for the company standards. Things like altering font size in the styles library, adding part dimensions to the parameters for the parts list, and creating a new content central library where our part numbers are already populated for the parts list and the structural shapes have datum planes in the middle rather than just at beginning and end.
Inventor Premium 2013 SP1.1
Vault 2013- plain vanilla version
HP G71 notebook
celeron cpu w 4gb RAM and 64 bit system
Win 7 home premium
View 2 Replies
View Related
Jan 10, 2012
if it is possible to increase the number of recently used values/parameters in the dimension dialog, during part sketching. For one part, I use approximately ten parameters that will be used repeatedly. When I'm done with one sketch and start with the next, only the last five parameters are in the recently used parameter list. (Create dimension --> select arrow on right side of dialog, see attachment Dimension_Dialog.jpg, excuse me for the poor quality ). It would be much more comfort to have more parameters in this 'recently used'-list.
Furthermore I'd like to know if it's possible to widen the parameter-list. In my case I've several parameters that start with the same prefix, followed by a differentiating suffix. When I create a new dimension, select the arrow on the right and select 'List Parameters', I have to adjust the width of this dialog every time to see the entire parameter. (see picture Dimension_parameters.jpg)
View 1 Replies
View Related
Feb 13, 2014
I'm working on a project incorporating field inspections into a Revit model. I have a model built, and I'm trying to export information regarding each structural element (family, type & instance, dimensions, etc) into an 'inspection sheet' (excel spreadsheet or text file). After the field inspection, my goal is to update the Revit model with inspection results. For example, damage to a beam might include a reduced cross sectional area/reduced moment of inertia.
View 2 Replies
View Related
Jan 19, 2010
One day until final plot, and we have a project where 3/4 of the enlarged plan callouts and associated views have lost their "Referencing Sheet" and "Referencing Detail" information.
1. What could have caused this?
2. How to get it back, short of removing the affected views and recreating the sheets?
View 4 Replies
View Related
Jul 25, 2013
Is there any way to turn on the information ,which can be obtained from schedules, on properties palette? For example, the length for the structural columns can be seen on the schedule created. However, it is not seen on the properties palette. How can I show that information on properties palette under dimensions?
View 1 Replies
View Related
Oct 18, 2012
some projects suddenly disappeared from the selection list that comes up when you start Smoke. The project files are still there and I didn't mess with them either. Is there any way to "refresh" the project listing?
I am working with PreRelease 4
View 5 Replies
View Related
Oct 9, 2012
i need to make a list of all the coordinates (X,Y) or (X,y,Z) of all the points in my project
the shape of my project look like an Eclipse
i made it out of 236 points ... i want to to put all those points in a table of ( X,y,Z ) ... i think there is some kinda output that can do that for me
iam uploading a vedio on youtube to show u what iam talking about
[URL]....
just a list of X,y,z of every point how i can do that ?
View 4 Replies
View Related
Apr 10, 2013
what is shared parameter?
How to create that .txt file using in shared parameter
View 5 Replies
View Related
Mar 26, 2013
I may be missing something obvious in Revit. I'm wanting to Export my model to use in Navis and QTO, when I send it out I can see the out of the box Revit parameters, but none of my customised ones. Is there a way to make the dwf/dwfx take all object properties out?
View 3 Replies
View Related
Mar 8, 2013
Is it possible to concatenate 2 parameters into one in Revit. So I want the door parameters (i.e. Width, height) to be automatically generated by the family. I want those two parameters to be joined in one field width x height. This is what the department wants.
If I can't then I can't. I know earlier versions of Revit could not concatenate. This is one example but there re several instances where I want (2) separate fields/ parameters to report into one field that can then be used fro a schedule.
View 2 Replies
View Related
Sep 13, 2012
How do I add additional columns and information to a keynote schedule?
View 2 Replies
View Related
May 16, 2013
Can Revit export to Autodesk Maya and retain all the texture information?
View 5 Replies
View Related
Nov 21, 2013
I need templates with different Part List settings in the same project. The Part List is set either for frame construction or for regular assembly.
I cannot use them both in templates due to Style conflict and should alter the Part List table manually. Is it possible to bypass this somehow?
View 9 Replies
View Related
Nov 27, 2011
When I go to Edit Shared Parameters and then the create button I get an error message "The Shared Parameter file was not saved successfully". I am stuck at this point and cannot go any further. What is causing the problem and how can I work around this. I am using Revit Architecture 2011.
View 2 Replies
View Related
Feb 22, 2012
Is there a way to add new parameters to revision schedule
View 2 Replies
View Related
Jun 3, 2013
A user can change a text parameter by clicking on an associated tag, at which point parameters values in the tag turn blue and allow the user to change the text value. Is there a way to disable this? I want the 'properties worksheet' to be the only place to edit the tag values.
View 1 Replies
View Related
Jun 3, 2013
I have a pile family where i have created a Shared Text parameter under Identity data called Vert Load. I have nested this into a pile cap family in several locations and have the same Shared Text parameter. If i select the pile in the pile cap family i have the option to put a value in the properties dialogue box under Vert Load. The pile cap family is now loaded into my project and the parameters shared in the project. When i select the Pile cap in my project then i have the option to add a value for the Vert Load but in this pile cap i have 3 piles and i want to give different values for each. When i select an individual pile within the Pile cap family then the Vert Load value is greyed out.
I want these vert Loads to appear in a schedule... I've attached a couple of images.
View 4 Replies
View Related
Dec 7, 2013
how to do the parameters of Schedule/Quantities.
View 9 Replies
View Related
Jun 13, 2012
I have been having this issue in both Revit Architecture 2012 and 2013. I have loaded in my parameters for my title blocks ("Addition", "City, State, Zip", "Address", and "Lot#/Block#) in the same way I have done it in any other project. but for some reason in this project after I have loaded in my parameters and set them to my sheets and I am still not able to select them and edit them on my sheets.
View 1 Replies
View Related
Oct 16, 2012
I am making a Schedules for metal flashings that i have added to my project. I have not had any problems using shared parameters to get the length of my line based families and everything is working fine.
But now comes the tricky part. I need to somehow add a parameter that would roundup my real lengths to my production lengths. f.eks i have couple flashings that are 2569mm And what i would like the schedule to show is that I have couple of 3000mm flashings.
View 3 Replies
View Related
Aug 10, 2012
I am currently using Civil 3D 2011 and 2012 but soon making the jump to 2013.In my project I want to able to present a 3D-object from Civil 3D 2011 to Navisworks, eg the body of a road. I am doing this currently with the add-on program from Autodesk Labs named Corridor Solids. The several different 3D-objects that represent the different layers of the road body needs to have a certain set of parameters. For instance, Name, Dimensions, Material and so forth.
Currently, the only thing that I can present in Navisworks is the layer name that I associate to that object when I export it from Civil 3D with Corridor Solids.Is there a way, in vanilla Civil 3D or perhaps an add-on program that I can use to associate more parameters to a solid?
View 2 Replies
View Related
Nov 11, 2013
I created one panel family. On plan view, I added two parameter for just width and lenght (Picture 1), but at the same time, I cannot added parameter for adjust the angle in the elevation plan(Picture 2) .
Attachment is my .rfa file
View 2 Replies
View Related
Oct 14, 2013
I am a student working on a research project exploring the integration of LEED criteria with BIM software, and I am exploring the use of both Revit and Excel to accomplish this task. One major problem that I am running into though, is with Shared Parameters.
I have created a set of LEED-specific shared parameters in Revit. These parameters are things like "Plumbing Fixture Family," "Plumbing Fixture Type," "Ventilation Zone," "Refrigerant Use," etc... basically different parameters that will inform an Excel spreadsheet containing formulas to calculate, ultimately, the total points awarded for each LEED credit.
My problem, is that in Excel, the names of the values for these shared parameters need to be very specific in order for it to work with the formulas I have created. What I need from Revit is the ability to create a shared parameter with a drop-down menu containing a set number of options that can be applied to any component in a project, so this can be done early-on in Revit, rather than after-the-fact in Excel. Such as choosing the type of refrigerant used in HVAC&R equipment (and yes, you could just type the refrigerant type into a text parameter field, but if it's not typed exactly as it is in the pre-determined formula it is associated with in Excel, it will return an error in Excel, which is less than desirable - a drop down would reduce/eliminate the margin of error).
Is there any way to accomplish this task? From what I have found online, this is only slightly possible in Family Parameters - I haven't found anything about Shared Parameters.
View 2 Replies
View Related
Dec 13, 2012
Having now worked out a method of adding custom labels to sheets via a shared parameter file I want to know if there is an easier way of making these parameters fully functional in any project without having to set project parameters in the file.
The method is (assuming starting with New > Family > Titleblock or some sort of Sheet family ):
Create shared param .txt file (Manage>Shared Params>Create) - then browse for that new file to load (within Edit family sheets)Group>New then Params>new (make sure param names are unique and distinct from system parms for text labels) - set Type to TextThen addtext label (add param at bottom LHS > Select > Edit > Browse to open shared param file) then add your custom param to Label Params table.When the sheet is loaded into a project the custom labels will not be editable.
This is the annoying bit having to set up proect params in each project:Manage > Proj Params > Add > Shared Param > Select > Edit > Browse to shared param file > select each custom param in term > OK >Group Param = Title Text and set Category to Sheets. The custom parameter will now be editable (each shows as ? and not been able to find a way of showing a default label text.
Is it really necessary to do this (step 5) with every project file or is there a way of loading a custom sheet and setting project parameters automatically?
Also is there any way of adding (or editing) params to the System Family for drawing sheets. An example is scale where the sys param updates to the first loaded view scale, then if a different scale vies is loaded, changes to "As indicated". I prefer to quote the main scale. Additionally the System file date param is the current date. My preference is set the date to first issue and then list revision dates separately (which is a common company standard in the UK).
View 1 Replies
View Related
Sep 6, 2012
We have centralized our content for our Revit users. We then customize the ini file to insure the paths look to the network locations.
One of my users has said that the proper and only recommended way to update the shared parameters file is while you are in Revit (I.E. have the path to the shared parameters file look to the network location instead of locally) so it updates on the fly. I didnt want to do that as I do not want to alter the "master" copy of the content we have on the network. I'd prefer that the user updates it locally, then we can just copy the file and overwrite the older file on the network.
I find nothing that says it is, but I prefer to explore all options and avenues first.
View 4 Replies
View Related