I am developing my sheets and I noticed that hidden lines are not showing on my pipe penetrations. My discipline is set to Coordination. The walls are part of a linked revit model. Is there a setting I need to turn on?
View 1 RepliesCan we show or hide the model edges with respect to Features or parts. I think, there must be only two options. ie. "Show all hidden edges" or "show all" and "Hide all edges".
View 3 Replies View RelatedI'm having issues involving hidden lines that should not be hidden lines in the idw environment.
I am using Inventor 2010 suite, 64-bit. I have largish assembly modeled with several sub-assemblies and a few reference assemblies. Some of the reference models are shrinkwraps from other large assemblies (surface type shrinkwrap, link broken), and other reference models are acutal assemblies that I am unable to shrinkwrap because I need the positional reps that they provide.
When I place my parent assembly, with all the normal and reference models included, on an idw, large portions of the reference models do not show up. If I change my line style to show hidden lines, the missing parts show up. At first, I thought that it may be because the reference parts in question were not originally in the view due to the reference data margin, so I started a new sheet and set the margin large enough to show the entire machine, as well as the state of Michigan, before I set the base view, but I still don't get those parts unless I enable hidden lines.
Even at that, Inventor is not behaving consistently. Some of the parts that won't show unless hidden lines enabled are fabricated parts that I or a co-worker modeled, some of the parts were imported from SAT, STEP and IGES files, and some of them are shrinkwrap parts. On top of that, some of the parts will show up normal (without hidden lines shown) if I change the part's BOM structure from reference to normal, while others still will not show unless hidden lines are enabled, regardless of the BOM structure. Keep in mind, none of these parts are hidden behind anything in the model, even with everything visible in my design view rep, so what's causing Inventor to think these parts are hidden.
Computer Specs:
Dell Precision M6500 mobile workstation (purchased in April 2010)
Windows 7, 64 bit OS
Intel i7 processor
8 GB RAM
NVIDIA Quadro FX 2800M graphics
Inventor Suite 2010, Subscription Advantage Pack, SP3
Computer Specs:
Dell Precision M6500 mobile workstation
Windows 7 SP1, 64 bit OS
Intel i7 processor
12 GB RAM
NVIDIA Quadro FX 2800M graphics
Inventor Suite 2010, Subscription Advantage Pack, SP4
I'm not sure if there's a way to stop this, but whenever I add parts to an assembly and switch to the drawing of the assembly, the hidden lines for those parts show up in every view of the assembly. Right now I'm having to go to each view and select the hide hidden lines option for each part. Is it possible to stop the hidden lines from showing up everytime I add a part?
Inventor Professional 2013
Intel Xeon W3680 @ 3.33Ghz
12GB DDR3 RAM
NVIDIA Quadro 2000 GPU
Windows 7 Professinal 64-bit
I am having a problem with the show hidden line command, because when used in the project I can see dashed lines and continuous lines. I was looking for how to manage the line pattern in this command but there is no way to do it.
See the attached image of my problem.
I tend to use my 3d views often to pan around my building. I often go from hidden lines to shaded to wireframe but theres seems to be now way to do this now on revit 2013. What happened? what are the settings to fix this?
View 2 Replies View RelatedI'm drawing objects (walls, platforms, etc.) in 3d made up primarily of extruded polygons. I want to be able to plot these objects in a way that hides all of the lines which are obscured by other objects. Currently I have my viewports set up with a 2D Wireframe visual style and a Hidden shade plot. This isn't working for me. I'm still getting all of the lines in the drawing visible no matter what.
Here's the strange thing: It seems to work perfectly fine in plan view, but not in front view. Also, it's worked fine in the past. It seems that the problem has gotten progressively worse over the past year or so.
I'm using AutoCAD 2008.
Why I can't set the hidden lines viewbase option to shaded with visible lines mode?
View 9 Replies View RelatedRe: 2D circle jagged lines, 3D model hidden jagged lines. How do i get smooth lines?
How do i get rid of jagged lines?
Circles and diagonal lines look rubbish when i am in hidden view which i use for simple 3d black / white (i think this is the best way?).
I have tried:
- viewres (1000, 5000, 10000, 20000 sightly better)
- regen
See examples.
square with jagged lines.fw.pngcircle with fuzzy outline.fw.png
I have a drawing that has had the origin indicator hidden.The part has changed, and I need to move the indicator to the new 0,0 location.How do I show the origin indicator again, or while it's hidden, move it to the new location?
View 4 Replies View RelatedMore than a problem, this is a doubt. Well, I was working on an illustration, just trying things here and there, and so I have many different layers of elements, some of them I want show, and some of them not (I don't want to delete them though, cause they may be useful later). At some point I realized that when I saved the file and went to see the preview (space bar) in its folder, the image had both hidden and shown elements.
So this is my doubt: is this normal? is there a way to show the preview with only the shown elements? Of course, when I export the file to .png, for example, I get the picture I should get (without the hidden stuff).
How do you convert a 3d hidden line view in Revit into 2d hiddenline flatten view? Or I have to bring it to AutoCAD to flatten it?
View 1 Replies View Relatedi xref a floor plan in which one of the sections has hidden lines. In the file with the XREF in it, the hidden lines are not showing.
View 9 Replies View RelatedI am using AutoCAD Plant 3D 2012 and working with the P&ID portion of the software. I created a block (to represent insulation with electric heat tracing) with multiple lines using multiple settings. All of the lines are on layer 0, the line weight is set to by layer. All of the lines have a linetype of by layer except one line which I need to be hidden. This block appears correctly on my screen, but when I print, the hidden line prints continuous.
My brain is exhausted and I think this is just a setting somewhere I can not seem to locate.
2d simple circle... I would like to define a circle using hidden lines. I also would like to have the hidden lines extend passed the circle by .25 of an in. I would also like to define the center of the circle aesthetically rather than just draw these hidden lines in.
View 3 Replies View Relatedmaybe I was dreaming. Maybe I've gone round the bend. I seem to remember somewhere a check box that would show hidden lines in paperspace viewports. For instance, a through hole, or a cavity in something.
Been a while since I've done much besides architectural drawing, so maybe I'm hallucinating.
I also distinctly remember the monochrome plot style always printing in black and white, even in a PDF. Today, the objects in modelspace are in color, and anything in paper space is black and white.
What is up with that? I must be missing something obvious, because I've screwed around with this for an hour and can't figure out what I've done to cause this.
I need hidden lines in my drawings for the shop floor and the pictures below is the problem. It shows the hidden lines in the veiwport in paper layout but when I print preview or print i does not show them at all. windows 7 autocad 2007.
View 1 Replies View RelatedI'm opening a drawing created in AutoCAD 2008, which is plotting hidden arcs as solid lines. Straight hidden lines are dashed as normal. I've attached both the paperspace view and the plot preview to show what I mean. The outer radius is showing as dashed in paperspace view, but appears as a solid line when plotted. The straight line leading to it is dashed in both views.
View 4 Replies View RelatedIm trying to plot a 3D object in Autocad 2009 but can't remove the hidden lines. The "Hide" command removes the appropriate lines in the viewport and in the print preview but the print-out still appears with all the lines.
View 1 Replies View RelatedWhat I'm looking to do is show the hidden lines blocked by a part in a plan view but not all of the hidden lines. Ie. I have a top view showing a clearance. If I turn on that clearance a portion of the original part is not viewed. When I turn on hidden lines I now see every hidden detail of that part (I didn't turn on hidden lines for the entire drawing). I then have to eliminate all the lines I don't want which is both tedious and cumbersome. Is there a way to turn on just the lines hidden by a particular object but not all the hidden lines of the part.
View 1 Replies View RelatedCan I get AutoCAD to show hidden lines from a 3d drawing created in AutoCAD 2012?
View 2 Replies View RelatedI need to have hidden lines on a 3D object dashed. So basically I need all the lines but those lines that are at the back of a cube(wich are normaly hidden), they need to be dashed. See the attachment
View 9 Replies View RelatedI am very new to autocad and i am trying to duplicate a template in my text book. (Yes, i'm an old new student). I have a drawing that i am trying to add a hidden line to and when i pick my start point and then select my second point, the line will snap to the nearest corner instead of staying where i put it.
View 9 Replies View RelatedIn my model, hidden lines look fine (ltscale is 1). But in my layouts (which I created with layoutwizard) the dashes and spaces are very large. How do I scale them down? (trying to use ltscale in the layout also applies it to the model so now lines appear as solid)
View 2 Replies View RelatedI'm trying to edit a mass so I have it isolated. I want to see how large something is so I need to dimension it. But when I create the dimension I can't see it. It is hidden.
It's hidden because I have everything hidden except for the mass. But the dimension wasn't included in the things to hide when I chose to isolate that mass. So why is it hidden now?
Is this normal for Revit? When you have something isolated, does it only ever just show the items you have isolated? Can't it ever show new objects too? Can you switch off this behavior so it displays the new objects too?
I am doing a .idw drawing of an assembly that I have several parts that I do not want to appear in the BOM parts list. I have therefore set these parts as Reference parts however this has caused them to appear as "hidden type" lines in the drawing and are even visible through other parts.
Is there any way to make these parts appear in the drawing "as normal" and not be listed in the parts list?
I"m using AutoCAD Electrical 2013 but this is more of a general CAD question.
I'm working with floor plans from another company, the drawing contains xref for the floor plans and other blocks. I need to label some of our equipment. I'm simply using a DTEXT label inside a rectangle as a block with the text as an atribute.
I'd like to place the label on the floor plan and have it hide anything underneath. I do this with 3D blocks for other work, but I'm looking for a quick and dirty solution.
I want to show only a few hidden lines in a drawing view.
I set the view to show hidden lines, then i attach a sketch to the view and project the hidden lines that i want.
But when i put back the view to hidden lines removed, the lines on the sketch disappear as well
I don't know if it is a bug or a setting, but in Inventor 2014, when I work on a part inside an assembly, with hidden lines visible, I am not able to see hidden lines from other parts.
is this a bug in Inventor 2014, or can this be changed in settings?
I really need that x-ray overview when projecting edges from hidden parts.
Is there way that within a drawing view, hidden lines can be shown for only some of the parts of an assembly, rather than just being a global toggle setting for the whole view? I know that it is possible to hide individual lines, but It would be good to be able to do this on a part basis, as some drawings can have thousands of hidden lines that would need to be selected and turned off.
View 2 Replies View RelatedIs it possible to show hidden lines in one part of a .idw view while the rest of the view does not show hidden lines? In the attached image I want to show the pull handle and towel bar through the glass in the door. The only way I know how to show this currently is to turn off the visibility on the glass.
Inventor 2013
Windows 7 Professional 64-bit SP1
HP EliteBook 8470w
Processor: Intel(R) Core(TM) i7-3610QM CPU @ 2.30GHz
Memory: 16 GB
AMD FirePro M2000
3D Connexion SpacePilot