Premiere Pro :: Independent Reference Book?
Mar 31, 2014
There are number of very good authors out there when it comes to Photoshop; Jeff Schewe, Martin Evening, Matt Kloskowski to name but a few. However I can’t find any good instructional/reference books when it comes to Premiere Pro.
The kind of book I’m looking for would describe Intermediate to Advanced techniques covering video ingestion to export but using Premiere Pro [CS6 or CC] as the Software medium, possibly including After Effects but not as the main subject.
The PDF manual for PremPro CC [and associated links] is great but no substitute for a well thought out reference book by an independent author.The Adobe Classroom series are also quite good if you want to follow a step be step guide. Not much use if you want a detailed description of some s/w aspect, or think out of the box.
View 38 Replies
ADVERTISEMENT
Apr 1, 2014
I have a project in which I need to do a 3 or 4-way split screen. While it's easy to set that up and position them at the right places, I cannot seem to find a way with which I could change the scale of the video with an Image Matte applied without changing that of the Matte as well. I can use offset and push the video around "underneath", so to speak, but I would love to be able to scale that video underneath as well. I know that could be done with a layer on top obscuring the video below but I find that rather cumbersome, especially with 4-way or more, adding quite a few more layers.
View 4 Replies
View Related
Jan 22, 2014
I'm primarily an Avid user but am learning Premiere Pro from scratch. Is it possible to export a QT reference file from Premiere? And if not is there an equivilent in the Adobe world?
View 2 Replies
View Related
Oct 4, 2012
When attempting to import a .txt file as a script for a clip's speech analysis, I get this error:
"Reference Script creation failed. The destination folder may be locked or you may not have permission to write to this location."
I Googled the error, but didn't come up with anything.
Importing from Adobe Story works fine, but .txt files are a problem.
View 12 Replies
View Related
Feb 25, 2014
I am in the process of making a photobook using Lightroom and discovered when I reached page 240 that I couldn't add any additional pages, much to my surprise. I was surprised because I knew from Blurb's website that the limit for standard paper is 440 pages and mistakenly assumed that this limit would also apply within Lightroom. I did more research online and found many others being surprised by this limitation after spending hours and days on a photo book. I will likely work around this by exporting from Lightroom to .jpg and uploading to Blurb, but that will take extra time and effort and reduces the appeal of using Lightroom to create a Blurb book. I had also tried exporting from Lightroom to .pdf only to find that the .pdf format exported by Lightroom is not compatible with the requirements of Blurb.
View 1 Replies
View Related
Mar 17, 2011
This page [URL] has an example of a 3D book that I would like to know how to make on GIMP or through some other means starting from a square 1D cover.
I would also like to know how to make a good CD image from a square book cover:
This isn't a great example because it doesn't show image transfer to CD without distortion: [URL]
View 3 Replies
View Related
Oct 29, 2012
I am trying to up load a 40 page 12" x 12" photo book to Blurb from the book module in Lightroom 4.2. It renders the pages and then having rendered the cover gets stuck, about 50% to 60% through the process. None of the photographs are starred or colour coded. I have uploaded successfully from this iMac in the last few weeks.
View 2 Replies
View Related
Mar 14, 2012
How do you copy pages w images from one book into another book, or even how do you merge one book into another book?
View 4 Replies
View Related
Feb 14, 2014
I purchased Lightroom 5 and am creating a photo book through Blurb. I accidently erased 38 pages, so after I re-created them, I clicked on Create Saved Book, which put it in Collections. Now I am trying to work on the book again, and can open it, but when I go to the Library of photos, Lightroom automatically repopulates a new book with all the photos in that file and won't let me put them in the book I saved. How can I get this partially finished book so that I can use it?
View 6 Replies
View Related
Nov 28, 2012
I have structures and alignments data referenced. If I assign the structures ref alignments in the dwg with the data refs for labeling, the next time I open the dwg the ref alignments are set back to none, causing the labels to be ?
It seems like this worked in the past?
View 1 Replies
View Related
Jun 27, 2012
I'm working on a large infrastructure project with numerous of drawings. On quite a few layout drawings I need to have the same base set of references, however I need to change the layer settings (colors, lineweight etc.). This cannot be done in the base reference itself as it is used by others. As the layouts I work with includes other references as well, it is time consuming to filter and change layer settings on each base reference.
My concept is to have a master reference file to manage all layer settings and add/remove base references. When the master reference is referenced into the layout, all layer settings on the base references should stay as set in the master reference. In this way I can easily control all base references with one file and make sure all changes will be the same for all the layouts.
New illustration of concept:
View 9 Replies
View Related
Jul 28, 2011
I am getting this error in my production drawings.
My setup is as follows:
- EG.dwg has my existing surface in it. I create a data reference to use it in other drawings.
- Level One.dwg has the EG surface data referenced in, and I use this to create alignments, profiles, and finish surface. All of these are turned in to data references.
- Storm Sanitary.dwg has my pipe designs. I data reference in the two surfaces, profiles, and alignments, and create pipe networks. I create references for these networks.
- Plan Profile.dwg is the production sheet I'm getting this error from. Every one of my civil objects is data referenced in to this drawing. Everything is inserted correctly, the pipes show correct FG surface elevations for their rims, etc.
BUT when I open this drawing, I get this error. I assume it's because my FG surface is not directly in the storm sanitary.dwg.
How do I get rid of this error, without combining drawings, or promoting the surface to one or more drawings? Isn't this exactly what data references is made for?
View 1 Replies
View Related
Jan 5, 2004
Is there a way to change the shadow of a layer without modifying the other shadows...
View 4 Replies
View Related
Feb 26, 2009
I am taking stills from an animation of a land based radar setup for monitoring sea ice. In photoshop, I use the path tool to delineate the edge of the landfast ice, and I want to save the line only with the pixel coordinates, so I can put that line on any image from the animations and it will be in the same place.
View 1 Replies
View Related
Nov 16, 2012
CS6 - Is it possible to rotate multiple objects independent of one another? In other words selecting say 9 object in a grid then rotating the all 30 degrees on their own axis.
View 5 Replies
View Related
Oct 28, 2011
I'm attempting to run an FEA of a preliminary design to isolate the best locations for weight reduction. When I attempt to do the analysis with convergence criteria of
Maximum number of h refinements: 2Stop criteria: 8%h Refinement Threshold: 0.5
I get the following issue:
Mesh failed: Face failure: Spar:1Model separates into 36 independent componentsSoft spring was added Is there anything I can do either model or simulation wise that will keep the model from separating?
View 9 Replies
View Related
Sep 16, 2013
Is it possible to create a text that is always in the viewing plane so it is always readable nomather how you rotate your 3D model?
View 4 Replies
View Related
Jul 31, 2007
I have .psd with with 21 layers i want each layer be saved as indephendant image
way to automate this - save each layer as standalone file (.jpg),
View 1 Replies
View Related
Feb 3, 2011
I've been trying to create a fade-style edge transition that works regardless of the background the object is placed on. I've tried the blend tool and the shadow tool.
The blend tool gave a good result on a colored background, but it was terrible when the object is moved over anything lighter. The shadow tool was better at handling differences, but I can't find a way to make the shadow the proper color. I need the object's color to just edge-fade into whatever background it is on.
View 6 Replies
View Related
Nov 29, 2012
In Revit 2012, I have a plan view (overall, first floor) which is "Independent" but also shows another view as the "Referencing Sheet." When I visit the sheets referenced, I can't identify a reference. The problem is that the "Referencing Sheet" is showing in our title block and we'd prefer to show a blank for Independent views.
View 1 Replies
View Related
Jan 23, 2014
Instead of forcing users to download and instal external plugins in order to accomplish this, why dont you instead make your insanely expensive software do what it is supposed to? Thats my question. You charge enough for it, and that is an insanely obviouse piece of functionality that should be available.
View 3 Replies
View Related
Sep 4, 2013
I downloaded a .psd file that is a catalog mockup. The document contains a smart object that looks like a catalog lying on a table top and I want to take my catalog art and place it in this smart object so that it looks like I've taken a nice photograph of my design work. That is the easy part!
What I want to do now is duplicate that smart object, put it underneath the original so it is peeking out and tilt it a bit. Then I want to put the back side of the catalog art on it so that it now looks like I've got both the front and back showing. Only problem I keep running into is that now when I click on the 2nd, duplicated smart object and put the different art (back of catalog) on it, it updates the original, first smart object that I want to show the front of the catalog.
Basically I want the two smart objects to not link and update each other when they are in the same document. I can't find anything online so far and am running out of time. I even tried calling Adobe and that WAS A MESS.
View 2 Replies
View Related
Aug 14, 2013
Is it possible to change the image size in Layer 1 independently of the Background image?
View 4 Replies
View Related
Jun 10, 2009
What are Independent Animated Regions (IARs) in still images?
Im trying to construct animated scenes from stills.
View 3 Replies
View Related
Nov 30, 2013
I would like to re-editable and flexible independent text areas
View 4 Replies
View Related
Jun 17, 2013
I would like to ask Is it possible to Split an Alignment and making each one independent?
View 2 Replies
View Related
Dec 1, 2011
I have been able to Pattern Assemblies and change an instance of that pattern to Independant in the past.
I am trying to do just that and the option doesnt show up when I right click.
View 9 Replies
View Related
Feb 11, 2013
I created a circle, then drew line segments from the radius to the edge of the circle in 15 degree increments by copying and repeating. Now I'm stumped. Can I somehow divide this to create independent wedges?
View 10 Replies
View Related
Aug 9, 2012
Let me explain my situation: I have a website where I publish my Illustrator documents as exported JPEG files. The website has a certain RGB-color background. And my illustrations have the same RGB-color background. Those two backgrounds have to match perfectly, in order to produce a nice effect. They do match in Firefox 14, but they don't match in Safari 6.
So, I need my exported JPEG files to have browser-independant colors. I read everything I found on the Internet on this topic, but it's just general stuff about Color profiles and the Edit > Colors... menu and color differences between browsers. NOT A SINGLE TUTORIAL on the whole Internet on how to produce browser-independant JPEG files using Adobe software.
Currently, I am exporting my Illustrator documents using an AppleScript, in order to save time:
Export docRef to file (myPath) as JPEG with options {quality:60, optimization:true, antialiasing:true, artboard clipping:true, saving as HTML:false}
But you don't have to give me an AppleScript necessarily. Just give step-by-step instructions on how to do this in Illustrator, and I will automate it myself. I know that PNGs are browser-independant, but I would prefer JPEGs, because the size is smaller.
View 4 Replies
View Related
Oct 17, 2013
I've created a pattern fill layer and assigned a vector mask to it. How do I move the pattern around without affecting the mask? I realize if I want to rotate the pattern I'd need to convert it to a smart object, but if I only need to adjust the pattern location there must be some way to do that without moving the vector mask along with it. A traditional layer shows the vector and raster mask layer with a lock icon, but fill pattern layers are different for some reason.
View 17 Replies
View Related
Aug 20, 2012
How can i make frosted glass effect like a independent layer, which i can use with any picture. It should look like smart object with smart filter, but i won't convert every picture to smart object, because my psd document include many picture. Anyway i will be able to use this filter on any place for every picture.
View 28 Replies
View Related
