way then using the text wrap thingy to wrap text around a object? cause the option that comes with the text tool to make it curve sucks. I want to wrap the text around the inside of a circular saw (theres a perfect white cirlce in the center of it)
View 3 Replies
I want to make text follow a prescribed line... or look as if it's wrapping around a curvature.
I have CS2.
I've been working with photoshop for years and I do mostly small biz web design.
I want some the nav bar (and text associated with it) to follow a kind of wave along the top.
Now, my only peoblem is...I can't figure out how to do it without typing one letter and moving them individually.
I know how to do it inIllustrator using the type path tool.
I'm a writer and what you see below was my first published article back in 1999, therefore I would like to have a good copy. As you can tell, the newspaper in the image is beat up and faded, so I thought I would chop up the JPG, lay it all out again in PS and fly in my text.
When I select text from WORD and paste it into a PS Text box, there are enormous gaps in between sentences. How I can fly my text into the re-done article so it looks exactly like the newspaper copy, except the text is crispy and clear-y.
Original newspaper article:
New layout:
Text - I tried to lay it out so it would sorta fit the format of the original article. FAIL
I'm trying to find a quick way to realistically wrap text onto the surface of this sphere, and initial experiments in CS2 with the Arc warp and some perspective finangling have proved below expectations.
View 9 Replies View RelatedI am trying to do is wrap a text around an image.
For instance, I would like to say:
Georgia is on my mind.
However, I want to wrap this around an oval image
So, basically, the text, "georgia is on my mind" would wrap around the oval image making everything look round.
Can photoshop do this?
If yes, can someone point to a tutorial that will help?
if no, do you know of a *free* image/text editor that can do this?
how do I use the text tool to wrap text around an image. Just like any news site or editorial site where the text wraps around the image and there is padding added to the image so the text is not right up against the image.
I want to be able to control the wrapping and I know there must be a way with PS CS.
I am trying to create a paragraph of text & the text is not wrapping! I am creating a large text box, but the text just disappears when it reaches the right edge of the box. I know that I have been able to do it before, but now can't. I have closed program & reopened, but no luck.
View 6 Replies View RelatedI'm attempting to use the "emboss" feature and wrapping the text to the surface of the part.
Attached is the example of the part I am working with. Also attached is the error message I receive after attempting the process. Is there another way to wrap the text about the surface of a "coiled" face?
wrapping a continuous line of text around a 90 degree bend. The third attached image is exactly what I need it to do. That is something I just put together as an example though.
I have some repeating information that I want to wrap around the border of an image. Being that it is repeating information, the text can also look like the first and second image uploaded, where part of the word is cut off. I would prefer this to be minimal though.
So far all I have found in my time searching on this leaves the words distorted.
No matter the complications, this also needs to be scripted. It is not feasible to do this manually as the repeating information is dynamic.
EDIT: The upload for the thumbnails is off.
Added Details.Attached File(s) textwrap2.jpg (8.9K)
Number of downloads: 19 textwrap2.jpg (8.9K)
Number of downloads: 17 textwrap.jpg (8.38K)
Number of downloads: 7
how to Wrap the text shown here. Obviously the Column labeled "ITEM NO." would be 1, 2 , 3 etc. So I would like that column to be smaller. When I make the column smaller, the wording disappears.
View 1 Replies View RelatedI am trying to create an attribute with multi-text and I am unable to get the text to wrap. I have the boundary width option checked and specified, but the text doesnt seem to care and keeps right on going....
View 4 Replies View RelatedHere is a strange problem since this morning. The text wrapping window is totally empty! I don't have any setting options anymore.
Yesterday, everything was OK but not today. I don't understand why and I don't know what to dot. I restarted InDesign and the computer but nothing changed. The other setting windows are OK.
What i'm looking for is the equivalent of using "Path along text" (in this case for a circular path) but using already rendered bitmap data instead of text and a font. Why i need to do this is: 1. i don't have a font for the logo text i created (i don't think one exists) and 2. i would like to add some effects before "wrapping" the text around the circle.
I'm having so-so success with "distort -> polar coordinates" .
how to "wrap around" an image into another image? What I'm doing is I have an image of a vitamin bottle, and I have designed a label for it, so what I need to do is to "paste" this label on the bottle digitally so it would look as if the label is really glued to the bottle.
Is there a special technique in Photoshop to do this? Not sure if it is the filter called Displace then use Wrap Around?
I am trying to wrap an AI logo onto a bottle in Photoshop.
View 5 Replies View RelatedI need a program on which I can create a mockup of commercial wrapping paper. By that I mean something that will accommodate the huge (like 23x40) size of the average sheet of wrapping paper.
Can Photoshop do this? I don't even have the program yet . . because I need to find out if Photoshop is the best program to do it in.
Say I have a picture of grass, and a picture of a ball, how can I wrap the grass around the ball so it looks like it's really on the ball?
View 6 Replies View RelatedI wanted to make it look like it is on a can or something similar, how would I correctly warp it? I can't get accurate enough results using displace or liquify, is there any way that involves tracing the actual curve of the can image?
View 6 Replies View RelatedI own a little web site and as I add new products right now the web designers have to make the images up.
Basically the images is of the mug slogan wrapped round the mug (see below)
now these guys are brilliant but I don't want to have to keep bothering them as they are busy doing other good work..
how I can do this myself, all images to go on the mugs are 1000x1000 but I can scale them down to whatever size I need... I've managed to work out how to do text but not graphics..
I came across this thread
[URL]..........
explaining how to wrap a label around a cylinder. However when I try myself, I obtain an enormous 3D cylinder with my label glued on it and once I reduce the size of the cylinder to the desired size, my label is minuscule. Additionally, it takes me ages to rotate/scale the cylinder in the right way.
Why is the 3D cylinder provided by Photoshop so enormous ?
I'm wondering if theres a way to wrap a pattern around certain shapes.. in this case above, wrapping a metal pattern around this worm-like wrap assembled in a circle(its a stand/base for a hologram)
View 1 Replies View RelatedI'm been trying to "wrap" my brain around this but with no successful. Attached is a view of a layout I've made. I'm trying to wrap an image on the numbered sections so that when I fold it, it looks seemless.
View 1 Replies View Relatedwrap.cdr
I set wrapping to the big A-letter to "Above/Below" and save file.
After opening the wrapping is in "Straddle Text" mode...
I am working with columns of paragraph text and this thing makes me very angry, because I must re-set this objects' wrapping mode to compensate text flow-back.
Why does the table wrap like this (see attached)?? Shouldn't it place the wrapped rows on the bottom?
View 6 Replies View RelatedI was checking out this tutorial on wrapping a bitmap around a sphere, and I downloaded the referenced filters. The filters did not seem to work. The spherical mould tool seems not to work for me either.
View 4 Replies View RelatedWrapping “at inserts”,
I couldn’t see any effect for any of the choices of the wrapping “at inserts” (don’t wrap/exterior/interior/both) while wrapping “at ends” is reflected directly on the drawing.
How to see the effect of wrapping “at inserts”?
What is the best setting for shrink wrapping an assembly?
I've found shrink wrapping it as a surface causes problems with the video card when rotating the model and placing views on a drawing.
I've been attempting to create a sphere with an Earth texture, for which I've made a custom appearance with a flattened picture of earth. Instead of wrapping to the sphere, however, the image is mirrored on both sides of the sphere and extremely distorted. I knew wrapping 2D geometry to a sphere was not strictly possible, but is there no way to pull it off with an image?
If not, would something like this be possible in 3DS max?
I do not understand door wrapping from the manual. What does that mean?
Also, door wrapping (ext) from ext = 102.5mm, what does this mean?
Also, door wrapping (int) from ext = 177.5mm, what does this mean?
Door panel width is about half of door width. Therefore I am confused what panel width mean since it should be roughly same as door width.
I have a problem wrapping a wall around a decustomised angled sill.
1. The Brick layer should wrap around the concrete core
2. The plaster should cover the whole wall and not stop at the sill
