Photoshop :: Where's Metadata In A Video - Lightroom Adjustments Not Transferred To CS6
Feb 23, 2013
I've shot some video clips with DSLRs, and imported into Lightroom4 along with my stills, with normal Import metadata applied. All looks good in LR.
Videos are generated as .MOV files.If I open a video in Photoshop CS6, and look at File Info, there is nothing there, not even camera info let alone the LR import preset with copyright info etc., nor the keywords and caption that I added in LR? Metadata for videos is also blank if I look at the file with Bridge.
Metadata for stills (including what was added in LR) is visible in both PS File Info and in Bridge.Why doesn't PS or Bridge see any metadata for the video files?
Separate problem, although perhaps related, is that I made some develop edits to the video in LR (using capture frame, develop, save as preset, then apply preset to the video file). All looks good in LR, as well as exported files. However, if I want to use enhanced capability in CS6, there is no "edit in" available as there is with stills. If I open the video directly in CS6, none of the edits show; I get the as-shot file (which I can understand). Is there any way to open the video in CS6 with LR edits applied? At least be presented the option of doing this or opening the as-shot file? If I open the file in Corel's Video Studio Pro, the LR adjustments are there (clipped to length and colour and tonal adjustments applied).
View 5 Replies
ADVERTISEMENT
Jul 10, 2013
I'm about to upgrade Lightroom as my version is 2. I've been late in trying to buy version 4, which supported video catalogues and did minor adjustments. Looking through version 5 manual, I've not seen any reference to videos.
View 2 Replies
View Related
Sep 1, 2013
I took a short video on my iphone of my sister-in-law's wedding. I want to transfer the video to my CS6 Cloud. Can this be done? Can I transfer it to photoshop or is there another part of the CS6 that would work better for this type of project? I have "streaming" from my iphone to my mac computers and the pictures go into my iphoto library. Can I "stream" the video to photoshop instead and then create "still shots" so I can edit individual photos to put in a wedding album?
View 4 Replies
View Related
Sep 17, 2013
Video metadata (EXIF) is not being correctly read by Lightroom 5.
1) From the same Canon S100 camera, photos show the correct model "Camera Model Name," but videos show "Unknown camera."
2) Lightroom 5 upgraded a catalog from LR 3. The videos already in the LR 3 catalog when it was upgraded to LR 5 show NO times (modified, created, nothing).
3) Importing the same videos directly into LR 5 shows Capture Time and Capture Date, but the time is offset by several hours.
The correct metadata is in the file, as proven by ExifTool (using Metadata Viewer Plugin).
View 1 Replies
View Related
Mar 10, 2012
I've just had a problem with LR4. Instaled the full version a few days ago on my old computer. Just got a new computer where I instaled LR4 and imported all my latest work and noticed that all video (.mov) metadata were not saved on to files (Photos are OK!!!) So all editing and rating/flags/color filter I've done is gone.
Thought that I forgot to save Metadata on my old computer and did a couple of tests.
I did some rating and some color filters on my actual catalog then saved the metadata a couple of times. Removed from the Library and re-imported and the metadata were not there again. Did the same to Photos and is fine!
LR4 does not write XMP to video files?
Just lost hours of work on cuting and rating a video Job since my old computer is gone.
View 2 Replies
View Related
Jan 3, 2014
I use LR5 to manage RAW/JPG/MOV files from events where I have taken pictures from. Most of the MOV files do either come from my Canon Camera or from my iPhone.
I regular export the files in a reduced file back to my iPad or iPhone for "public" viewing. Unfortunately LR5 is loosing all metadata from my videos, especially creating date/time and GPS tags.
Is there any way to include metadata in exported (and compressed) video files ? It works in photo's very well.
If not, do you know any other program which can compress original video files from my iPhone and keep the metadata ?
View 3 Replies
View Related
Jan 15, 2014
We have a bunch of shots taken using natural light - the shots all have completely different exposure and white balance adjustments.
Now that the shots feel like they've been shot at the same time of day (and on the same day) we'd like to start adjusting the white balance accross multiple shots - but use the current white balance/exposure from each individual shot as the starting point - not reset the adjustments.
Kind of like baking the current settings or making adjustments on top of current adjustments - or make new adjustments relative to the current adjustments.
View 12 Replies
View Related
Apr 18, 2012
When I update photo's to current process in LR 4.1RC, and then edit them in Photoshop, I don't see the changes I've made in LR (Exposure, contrast, highlights, shadows, whites and blacks) in CS5.
If I don't update them, all changes are perfectly transferred to CS5.
View 2 Replies
View Related
Mar 23, 2012
As far as I can tell, Copy Metadata and Synchonize Metadata do the same thing. Is there a difference in what they do?
View 1 Replies
View Related
Mar 16, 2014
I loaded some old, saved images I have on disk to Lightroom. When I attempt to export the image to email, the command states It can't locate the mage, even though I am looking at it.
View 2 Replies
View Related
Oct 2, 2012
Since transferring my photo files from my hard drive to an external drive(without telling lightroom) I have completely lost all connections between lightroom and the new destination (my external drive). There is no sign of anything at all in Lightroom. It shows 0 photos, my preferences seem gone, and it is as though I have just loaded up lightroom for the very first time. Do I need to start from scratch and reimport my photos or is there some way I can retreive/reconnect the photos so I have the edits I have already made?
View 9 Replies
View Related
Aug 25, 2012
I have recently moved my photo files to a different harddrive from their original location. Some of these images had been included in "collections" prior to the move. Now, when I open a "collection", the photo files are no longer associated with the collection. How do I reassign a location to these files in these collections?
I have already reassigned the photo files in the catalog to their new harddrive location.
View 9 Replies
View Related
Jan 6, 2014
When I make adjustments to a photo in Ligthroom, such as Lens Correction, those adjustments are not applying to the image when I pull it into Photoshop.
All the sudden it just stopped carrying the adjustments over.
View 3 Replies
View Related
Jun 25, 2012
I transfer my adjustments from lightroom to photoshop for additional editing. The adjustments show in the new Photoshop file. However, when I make a selection from that file and copy and paste it into a different Ps file, it does not show the adjustments. I even tryed saving the adjusted photoshop file as a jpeg and then opening it up and reselecting what I want.....Copy and paste it.....and the adjustments still don't appear on the different Ps file/photo. How can I keep the adjustments made in lightroom as a selection to copy and paste to a new file?
View 2 Replies
View Related
Aug 18, 2012
Lightroom adjustments that I make to an image are not being carried over when I "Edit in Photoshop CS6". I'm using LR 4.1 and ARC 7.1.
View 5 Replies
View Related
Dec 6, 2013
I don´t know why, but suddenly there seems to be no way, I can get edit in PS with LR adjustments. There used to be an options box in LR when selecting "edit in Photoshop". Now I get no options, and my adjustments from LR does not show in PS. I have tried both the tiff and PSD setting in preferences/external editing, but no luck. I have also used the "Reset Warnings" in LR, hoping this would bring back the external edit dialog box, but no luck.
as I have a lot of urgent work to do, and I go back and forth between LR and PS a lot.
Mac OS 10.8.5
Photoshop CS6 13.0.5 x64
Camera Raw 8.2.094
Lightroom 5.2
View 10 Replies
View Related
Jun 3, 2013
I have recently opened a LR catalog from an external hard drive connected to a new mac pro. All the 'user templates' are there and all the images in each respective collection, although I had to re-connect them as the originals had moved to a new external hard drive but... most (not all), but most of the images I had adjusted in 'Develop' have gone. Most of the images I made a virtual copy of before adjusting have reverted back to the original raw image without the adjustments.
If I have to start all over again from scratch or is there a magic 'LR Develop adjustments' file I haven't transfere to the new laptop and hard drive?
View 2 Replies
View Related
May 15, 2012
Are the modifications that you make during development added consecutively as you make each one or are they all added up and applied once at the end?
In other words: say I have a RAW file, well exposed, but it's flat and boring. So I choose to knock the whole thing down 1 eV in exposure. Then I use the adjustment brush and add 1 eV to just my subject. Is my subject essentially untouched as to exposure, or has the subject been brought down and taken back up and thus would have some inherent noise and whatnot?
And does the same apply for adjustments other than exposure, like clarity or tint?
View 9 Replies
View Related
Apr 10, 2012
I am using LR4 and PS-CS5. I just upgraded to LR-4 but now when I select an image to edit in PS, the LR adjustments have been stripped. I have looked at preferences and menu items but cannot find how I can change this.
View 3 Replies
View Related
Jun 11, 2012
I have reinstalled LR4.1 to the new hard drive on my computer. Had to import all the images again, and all my LR adjustments seems gone? Mapping, keywords, rating, development adjustments etc... The old catalogues are on the new hard drive. How can I get LR to find my ajustments? Or do I have to do it all over again :S ?
View 2 Replies
View Related
Jan 25, 2014
When I use send an image from LR to PS using "Edit in..." Only some of the LR adjustments show up in PS. (E.g. color adjustments are visible while crop and exposure are not). All versions (LR, PS, ACR) are the newest. I am on mac OSX 10.9.1.
View 11 Replies
View Related
Mar 19, 2012
I upgraded to LS4 without a hitch, and updated my catalogs. Everything seemed to work fine for a few days. Then I tried to drag my LR catalog onto another drive and open it from there. Afer that, it all went down the tubes, regardless of which copy of the catalog I open.
Normally I'll make adjustments my my imported RAW files in LR, then hit "command-E," and edit original to PS CS5.1 (all software is current release), with LR adjustments rendered to that TIFF file. Now, I don't ever get that dialog box, but I do get another box telling me to update to Camera Raw version 7.0, which I understand is not available yet. So I hit "open anyway," and the image appears in PS but without any adjustments. Furthermore, it appears to be an opened CR2 file, rather than a TIFF. I didn't even know PS could open a CR2 file without the Camera Raw plugin dialogue launching. So, it appears I have a CR2 file opened rather than a TIFF, despite the external editor presets being correct (TIFF, 16bit, etc.).
I can render it using lightroom, but that doesn't work for me because I need to be able to not save a tiff I've created (layers of different adjustment settings I discard), I need to be able to click "don't save" but that way just automatically saves them. Also,
View 3 Replies
View Related
Jul 19, 2013
I am running windows vista with lighroom 4.1 and CS4 11.0.2.
If I edit a photo with lighroom and send it to CS4 for final editing I am not getting any lighroom adjustments transfered with the image. I have been using lightroom 2.5 with no problems and now I have upgraded to lightroom 4 I am having problems..
View 2 Replies
View Related
Aug 9, 2012
I'm having a problem exporting a DNG file as an original or as DNG with adjustments. All the exports is the original DNG file. I do get a clean export with adjustments when I export to jpg.
here's the details: software is lightroom 4.1 and camera raw 7.1. File was NEF converted to DNG on import. numerous adjustment to tone, w/brushes, etc. xmp written to file. tried dng export preset as well as through the export module. exported to various versions of camera raw. all with no luck. opened in CS 5 and Preview, with the same results: no adjustments to DNG.
I have won a free high-end print and the printer says DNG will be better.
View 1 Replies
View Related
Jun 20, 2013
I have upgraded from LR4 to LR5, but my adjustments from developer module, stars, keywords tag etc is missing. I think I moved the catalog from 4 to 5 instead og copied
View 5 Replies
View Related
Feb 25, 2012
As you can see, I am in a frantic stage. I just finished editing through close to 800 photos of a wedding that I recently shot. After I finished editing them I went to the floder location, in Windows, not Lightroom 3 (huge mistake), and I made a folder inside of that folder called "raw". I selceted all of the photos and then moved them into the that folder. So, the files were in weddings/021812/ and I put them in weddings/021812/raw/ . When I went to Lightroom, of course it said that the files were offline. Instead of finding the missing folder, I clicked "synchronize folder" and pointed towards the "raw" folder. I noticed that the images were importing without their setting and I cancelled the synchronization. I went back to windows and moved all of the photos back to their original folder and now when I try to "update folder location", the photos do not show up in Lightroom.
View 13 Replies
View Related
Jun 2, 2012
I would like to be able to sort a set of photos by those that have Develop Adjustments and those that do not. For now, I don't want to sort by the type of adjustment.....just whether or not an image has one.
View 3 Replies
View Related
Aug 12, 2012
I use [k] to get me into local adjustments, and [z] to zoom in, how I can pan around without deselecting the local adjustments (which loses which local adjustment I have selected). I tried [fn]+[arrow key] without any luck. This is very disruptive for me.
retina MBP + OS X 10.8 + LR4.1
View 3 Replies
View Related
Feb 7, 2014
I need to pass raw files, but I would like to apply my adjastments. Can I do it with Lightroom?
View 9 Replies
View Related
Jun 11, 2013
I just bought LR5 yesterday. I own Photoshop CS5. Normally I open my images in LR, make my raw adjustments and then open in CS5 for my creative editing. When I do that now from LR5, the adjustments revert back to the original settings when opened in CS5. I downloaded and installed the new Camera RAW 8.1... it didn't make a difference.
LR5 is useless to me if the adjustments don't transfer over to CS5 as I ALWAYS use finish in CS5.
View 11 Replies
View Related
Dec 5, 2011
I am having trouble with RAW files in Lightroom, and also camera RAW.
When I import a RAW file into Lightroom (i have the current version, 3.5) Lightroom adds adjustments to the file, for example in the basic section of the develop module exposure will be set to 0.25, recovery will be at 100, contrast 54 etc...
I have tried shooting on different cameras and I do not have the problem. I have put the same RAW files into another computer with Lightroom and it works fine. Just seems to be a wierd combination of my camera and my computer.
Everything was working fine, and I recently purchased a new camera, and still everything was fine. Then one day it started adding adjustments to the RAW image automatically. And the same when I open a file in camera RAW..
View 1 Replies
View Related
