When I make adjustments to a photo in Ligthroom, such as Lens Correction, those adjustments are not applying to the image when I pull it into Photoshop.
All the sudden it just stopped carrying the adjustments over.
Lightroom adjustments that I make to an image are not being carried over when I "Edit in Photoshop CS6". I'm using LR 4.1 and ARC 7.1.
View 5 Replies View Relatedfor some weird reason all of a sudden the adjustments I make to my images in ACR are not carrying over when I open them in CS5. I've cheked the Adobe website to make sure I have the latest versions of both ACR & CS5 & I do. Any thoughts on how I can correct this? Very frustrating to adjust 10 - 15 wedding images in ACR then they're right back to the original image when I open them in CS5.
View 11 Replies View RelatedI am a commercial photographer and have use Lighroom since it was introduced. I just updated Photoshop to CS6 and found that the Chromatic Aberration corrections I apply to an image in Lightroom 4.2 are NOT following the image when I open the image in CS6 using Command-E to open the image from Lightroom. All other Lightroom corrections have been applied, only the Chromatic Aberration correction is missing. One other piece of information is that I convert all RAW files to DNG when I inport the RAW file into Lightroom. I had none of these issues when I was using Photoshop CS5.
View 3 Replies View RelatedWe have a bunch of shots taken using natural light - the shots all have completely different exposure and white balance adjustments.
Now that the shots feel like they've been shot at the same time of day (and on the same day) we'd like to start adjusting the white balance accross multiple shots - but use the current white balance/exposure from each individual shot as the starting point - not reset the adjustments.
Kind of like baking the current settings or making adjustments on top of current adjustments - or make new adjustments relative to the current adjustments.
I did not download the LR5 beta. This is the new update - upgraded my LR4 catalogue today, now trying LR5. In Develop mode. I'm getting some seriously weird issues.
Example. Adjust exposure by +33 on one image. Hit Cmd Right to go to next image. The next image automatically adjusted itself to +33 to match. WTF?
Changed an image to B&W. Before even going to the next image - the one next to it changed to B&W automatically - to match. Even had the same burn masks etc.
It's like it has Auto Sync on or something - but it isn't.
I noticed that if I adjust by +33 then hit enter. Then go to the next image - the setting isn't carried over. I also noticed that sometimes the preview is carried over. But if I hit the history and go back one state - then back to the last state - it corrects itself. But in the case of one B&W image - it did not. It lost my history of ever having changed the image to B&W. Really odd and worrying.
One of the great features of the Sony NEX-7 is that the NEX-7 makes automatic lens corrections for vignetting, chromatic aberration and distortion problems. These corrections are written to the file and the preview. However, when converting these images from ARW to DNG the correction data seems to be lost, and the images revert to their uncorrected state. This requires all images to then be re corrected with the Adobe lens profiles, which is both tedious, an extra step, and also seems to produce results that are somewhat less optimal than the original corrections made by the camera.
Should not the ACR Converter and Lightroom retain the lens corrections made by the camera?
Lightroom 3.3 just stopped working error says lightroom has stopped working and shuts down. installed photoshop CS3 is that the problem?
View 2 Replies View RelatedI've shot some video clips with DSLRs, and imported into Lightroom4 along with my stills, with normal Import metadata applied. All looks good in LR.
Videos are generated as .MOV files.If I open a video in Photoshop CS6, and look at File Info, there is nothing there, not even camera info let alone the LR import preset with copyright info etc., nor the keywords and caption that I added in LR? Metadata for videos is also blank if I look at the file with Bridge.
Metadata for stills (including what was added in LR) is visible in both PS File Info and in Bridge.Why doesn't PS or Bridge see any metadata for the video files?
Separate problem, although perhaps related, is that I made some develop edits to the video in LR (using capture frame, develop, save as preset, then apply preset to the video file). All looks good in LR, as well as exported files. However, if I want to use enhanced capability in CS6, there is no "edit in" available as there is with stills. If I open the video directly in CS6, none of the edits show; I get the as-shot file (which I can understand). Is there any way to open the video in CS6 with LR edits applied? At least be presented the option of doing this or opening the as-shot file? If I open the file in Corel's Video Studio Pro, the LR adjustments are there (clipped to length and colour and tonal adjustments applied).
I'm using Photoshop CS5.5 and I've placed a layer with my watermark. I'm trying to apply a plastic wrap effect, or many different artistic effects. But I cannot preview what it will look like prior to carrying out the artistic filter.
I think I may have to rasterize the layer or something like that. Basically I carry out the filter. nothing changes.Older versions you could see what was going to happen before you carried it out.
I transfer my adjustments from lightroom to photoshop for additional editing. The adjustments show in the new Photoshop file. However, when I make a selection from that file and copy and paste it into a different Ps file, it does not show the adjustments. I even tryed saving the adjusted photoshop file as a jpeg and then opening it up and reselecting what I want.....Copy and paste it.....and the adjustments still don't appear on the different Ps file/photo. How can I keep the adjustments made in lightroom as a selection to copy and paste to a new file?
View 2 Replies View RelatedI don´t know why, but suddenly there seems to be no way, I can get edit in PS with LR adjustments. There used to be an options box in LR when selecting "edit in Photoshop". Now I get no options, and my adjustments from LR does not show in PS. I have tried both the tiff and PSD setting in preferences/external editing, but no luck. I have also used the "Reset Warnings" in LR, hoping this would bring back the external edit dialog box, but no luck.
as I have a lot of urgent work to do, and I go back and forth between LR and PS a lot.
Mac OS 10.8.5
Photoshop CS6 13.0.5 x64
Camera Raw 8.2.094
Lightroom 5.2
I have recently opened a LR catalog from an external hard drive connected to a new mac pro. All the 'user templates' are there and all the images in each respective collection, although I had to re-connect them as the originals had moved to a new external hard drive but... most (not all), but most of the images I had adjusted in 'Develop' have gone. Most of the images I made a virtual copy of before adjusting have reverted back to the original raw image without the adjustments.
If I have to start all over again from scratch or is there a magic 'LR Develop adjustments' file I haven't transfere to the new laptop and hard drive?
Are the modifications that you make during development added consecutively as you make each one or are they all added up and applied once at the end?
In other words: say I have a RAW file, well exposed, but it's flat and boring. So I choose to knock the whole thing down 1 eV in exposure. Then I use the adjustment brush and add 1 eV to just my subject. Is my subject essentially untouched as to exposure, or has the subject been brought down and taken back up and thus would have some inherent noise and whatnot?
And does the same apply for adjustments other than exposure, like clarity or tint?
I am using LR4 and PS-CS5. I just upgraded to LR-4 but now when I select an image to edit in PS, the LR adjustments have been stripped. I have looked at preferences and menu items but cannot find how I can change this.
View 3 Replies View RelatedI have reinstalled LR4.1 to the new hard drive on my computer. Had to import all the images again, and all my LR adjustments seems gone? Mapping, keywords, rating, development adjustments etc... The old catalogues are on the new hard drive. How can I get LR to find my ajustments? Or do I have to do it all over again :S ?
View 2 Replies View RelatedWhen I use send an image from LR to PS using "Edit in..." Only some of the LR adjustments show up in PS. (E.g. color adjustments are visible while crop and exposure are not). All versions (LR, PS, ACR) are the newest. I am on mac OSX 10.9.1.
View 11 Replies View RelatedI upgraded to LS4 without a hitch, and updated my catalogs. Everything seemed to work fine for a few days. Then I tried to drag my LR catalog onto another drive and open it from there. Afer that, it all went down the tubes, regardless of which copy of the catalog I open.
Normally I'll make adjustments my my imported RAW files in LR, then hit "command-E," and edit original to PS CS5.1 (all software is current release), with LR adjustments rendered to that TIFF file. Now, I don't ever get that dialog box, but I do get another box telling me to update to Camera Raw version 7.0, which I understand is not available yet. So I hit "open anyway," and the image appears in PS but without any adjustments. Furthermore, it appears to be an opened CR2 file, rather than a TIFF. I didn't even know PS could open a CR2 file without the Camera Raw plugin dialogue launching. So, it appears I have a CR2 file opened rather than a TIFF, despite the external editor presets being correct (TIFF, 16bit, etc.).
I can render it using lightroom, but that doesn't work for me because I need to be able to not save a tiff I've created (layers of different adjustment settings I discard), I need to be able to click "don't save" but that way just automatically saves them. Also,
I am running windows vista with lighroom 4.1 and CS4 11.0.2.
If I edit a photo with lighroom and send it to CS4 for final editing I am not getting any lighroom adjustments transfered with the image. I have been using lightroom 2.5 with no problems and now I have upgraded to lightroom 4 I am having problems..
I'm having a problem exporting a DNG file as an original or as DNG with adjustments. All the exports is the original DNG file. I do get a clean export with adjustments when I export to jpg.
here's the details: software is lightroom 4.1 and camera raw 7.1. File was NEF converted to DNG on import. numerous adjustment to tone, w/brushes, etc. xmp written to file. tried dng export preset as well as through the export module. exported to various versions of camera raw. all with no luck. opened in CS 5 and Preview, with the same results: no adjustments to DNG.
I have won a free high-end print and the printer says DNG will be better.
I have upgraded from LR4 to LR5, but my adjustments from developer module, stars, keywords tag etc is missing. I think I moved the catalog from 4 to 5 instead og copied
View 5 Replies View RelatedI am creating a table of data using mtext to store data such as project name, client name, address, phone, scale, date etc. etc. and I plan to use that as the "master data" so I dont have to change a dozen text blocks whenever I update the file.
So I use FIELDS to enter the data into my title block. Problem is it works fine in Modelspace, but it doesn't carry over to Layout.
As you can see, I am in a frantic stage. I just finished editing through close to 800 photos of a wedding that I recently shot. After I finished editing them I went to the floder location, in Windows, not Lightroom 3 (huge mistake), and I made a folder inside of that folder called "raw". I selceted all of the photos and then moved them into the that folder. So, the files were in weddings/021812/ and I put them in weddings/021812/raw/ . When I went to Lightroom, of course it said that the files were offline. Instead of finding the missing folder, I clicked "synchronize folder" and pointed towards the "raw" folder. I noticed that the images were importing without their setting and I cancelled the synchronization. I went back to windows and moved all of the photos back to their original folder and now when I try to "update folder location", the photos do not show up in Lightroom.
View 13 Replies View RelatedI would like to be able to sort a set of photos by those that have Develop Adjustments and those that do not. For now, I don't want to sort by the type of adjustment.....just whether or not an image has one.
View 3 Replies View RelatedI use [k] to get me into local adjustments, and [z] to zoom in, how I can pan around without deselecting the local adjustments (which loses which local adjustment I have selected). I tried [fn]+[arrow key] without any luck. This is very disruptive for me.
retina MBP + OS X 10.8 + LR4.1
I need to pass raw files, but I would like to apply my adjastments. Can I do it with Lightroom?
View 9 Replies View RelatedI just bought LR5 yesterday. I own Photoshop CS5. Normally I open my images in LR, make my raw adjustments and then open in CS5 for my creative editing. When I do that now from LR5, the adjustments revert back to the original settings when opened in CS5. I downloaded and installed the new Camera RAW 8.1... it didn't make a difference.
LR5 is useless to me if the adjustments don't transfer over to CS5 as I ALWAYS use finish in CS5.
I am having trouble with RAW files in Lightroom, and also camera RAW.
When I import a RAW file into Lightroom (i have the current version, 3.5) Lightroom adds adjustments to the file, for example in the basic section of the develop module exposure will be set to 0.25, recovery will be at 100, contrast 54 etc...
I have tried shooting on different cameras and I do not have the problem. I have put the same RAW files into another computer with Lightroom and it works fine. Just seems to be a wierd combination of my camera and my computer.
Everything was working fine, and I recently purchased a new camera, and still everything was fine. Then one day it started adding adjustments to the RAW image automatically. And the same when I open a file in camera RAW..
If I want to clear all History and adjustments, I know I can "Clear All" on the History but how do I clear the "Adjustments" so the little icon on the filmstrip thumbnail image (+/-) "this image has adjustments" goes away, too?
View 7 Replies View RelatedSometimes when I want to edit a LR edited photo in PS, even when I open a copy with LR adjustments, some of those settings get lost when the PS file opens, especially brush adjustments.
View 7 Replies View RelatedI transformed an image in LR 5.3 and gave it a 70s look including some adjustments with the brushes.
When I create a new preset, I cannot import the adjustments of the brushes as well.
Is possible to create a new preset that includes the adjustments of the brushes (see red areas)?