Lightroom :: Chromatic Aberration Correction In LR4 Not Carrying Over To CS6 Photoshop
Nov 7, 2012
I am a commercial photographer and have use Lighroom since it was introduced. I just updated Photoshop to CS6 and found that the Chromatic Aberration corrections I apply to an image in Lightroom 4.2 are NOT following the image when I open the image in CS6 using Command-E to open the image from Lightroom. All other Lightroom corrections have been applied, only the Chromatic Aberration correction is missing. One other piece of information is that I convert all RAW files to DNG when I inport the RAW file into Lightroom. I had none of these issues when I was using Photoshop CS5.
View 3 Replies
ADVERTISEMENT
Jan 15, 2013
Why can't I find "Remove Chromatic Aberration" under Lens Correction?
View 2 Replies
View Related
Mar 8, 2012
So why did you remove the possibility to correct ca manually?
View 7 Replies
View Related
Jun 12, 2013
I have recently been playing with removing CA from pictures. I have a particular RAW file picture of the inside of a church dome. I have made a number of Develop Module adjustments. There is purple and green fringing along the window frames and the columns by the windows, which I would like to remove.
I can remove most of this fringing by checking the Remove Chromatic Aberration box and then either use the dropper tool or just slide the Amount sliders a bit for both the Purple and the Green fringes. I do see a noticeable difference.
However, I have a problem Exporting the resultant file. Right before I check the Remove CA box, I can Export the RAW file as a JPEG, with, say, 80% quality, and leaving size/dimensions unchanged.
After I check the Remove CA box, however, when I try to Export the file, I get 1 of 2 results. One result, probably more common, is that it appears as if the file is being Exported; however, after a bit of time, I get an error message that says "Not Enough Memory." The second thing which can happen is that it appears as if a file is being Exported, but there is no disc activity, and, after it looks as if the Export completes, there is no file in the folder I specified. If I try Exporting again, leaving everything exactly the same, I get no message at all telling me that the file already exists, confirming that it had not been exported the first time.
I have tried greatly reducing JPEG quality (down to 40% I think), and I still cannot Export. I have tried lowering the dimensions down to 1920 pixels on the long side, and I have tried restricting the file size to about 5000K. Nothing so far has allowed me to Export this file.
Yet, if I go back in the history, right before I checked the Remove CA box, I can Export that file.....although the only way I can do that is to first exit Lightroom and then relaunch it.
My PC is about 4 years old; I have 4 GB of memory. Maybe I need more, but even by trying to greatly reduce the file size, I have these problems.
View 2 Replies
View Related
Apr 29, 2012
LR4.1 RC2 for Mac.
In the Develop Module under Lens Corrections, the CA option is no longer present. It was there in the previous RC. In the Sync Settings, it is a still a selectable option.
View 1 Replies
View Related
Mar 7, 2012
I must state that I am miffed that manual adjustment of C.A. has disappeared in LR4. This would have been easier to understand if some commonly used lenses that are not the latest release had profiles available. For example, I shoot the older version Nikkor Micro D 60mm and 105mm lenses for underwater photography. I built a preset to correct the C.A., which I now assume won't work. The automatic setting does not entirely remove it. Is there any way to deal with this aside from adding an extra step and editing CA in Photoshop (which doesn't do a great job of it, either)?
View 3 Replies
View Related
Jun 27, 2012
I've just recently found that new chromatic aberration tools kills settings for old chromatic aberration tools. Lets say I have a PV2010 photo with adjusted sliders for chromatic aberration reduction and selected defringe "all edges".Now I'm importing this photo to LR 4.1. I'm not updating process version!
Photo is automatically updated by Lightroom to new CA controls (note it still PV2010 photo). Well, I must say the the results are superb - they are the same as I was achieving with manual sliders, but now with only one click. But the problem is - Lightroom says that metadata have been changed, and I am writing back changes to XMP.But now XMP contains settings for new CA tools, but settings for old CA tools are LOST.
So if I want to open this image in ACR 6.6, or send it to someone with older LR version I end up with completely resetted CA settings, because ACR 6.6 does not have new CA tools, and settings for old tools are killed by LR 4.1 - they are just removed from XMP. So I am loosing CA removal settings completely when opening image in earlier version of application. And I am NOT updating process version!
View 11 Replies
View Related
Oct 29, 2012
I am having a problem with LR 4.2 in correcting chromatic aberation. When I try to use the "defringe tool" I receive the following error message, "Cannot set the purple or green fringe color. Please sample a representative fringe color agian." However, I can see the sampled pixel in the pallette and read the RGB values.
View 4 Replies
View Related
Apr 28, 2012
Unchecking the "Remove chromatic aberration" after it had been checked and adjusted does not work in the sense that the removal remains active.
View 3 Replies
View Related
Jan 27, 2013
The chromatic aberration check box that should be present under lens corrections is missing from my LR4 program, how to get it back
View 6 Replies
View Related
Dec 19, 2012
CS5 camera raw, under lens correction tab, profile, no chromatic aberration slider. Under the manual tab, same thing. Do I need to download an update?
View 2 Replies
View Related
Feb 24, 2013
I am using bridge CS5 (version 4.0.5.11) and working in camera raw. In the lens corrections tab in the manual control I have lost my chromatic Aberration controll, this is to say, it has disappeared. I now see under the manual tab I now see the transform controlls, below that I see lens vignetting. The chromatic aberration conrolls have disappeared, where have they gone and can I get them back and how do I do that?
View 5 Replies
View Related
Nov 6, 2011
The subject line basically says it all. The chromatic aberration tool in Aperture doesn't do much for me. Is there one in PSE 10?
View 11 Replies
View Related
Jun 21, 2013
I work with GIMP 2.8.4 on Windows XP. In order to remove strong lateral chromatic aberrations I tried the CA plugin version 3x What I saw in the preview looked good, but when I pressed the OK button no result appeared. What is the reason? How to install this plugin on Suse Linux step by step.
View 4 Replies
View Related
Jan 30, 2013
Does PS use the sidecar files to correct previously processed raw images where the lens aberration correction box had previously been checked when processed in ACR? I sometimes dial back the lens aberration correction if it adversly effects shaprness in the corners.
When I merged 3 cr2 raw files to hdr the lens geometric aberration was corrected--but perhaps that is always done anyway?
Also I had previously processed the 3 raw files in ACR and left 16 bit files open in PS. PS warned that it is best to merge the raw files themselves, though I couldn't detect much loss of dynamic range if the 16 bit files in PS were merged or the raw files themselves. I had never saved the files yet as 8 bit jpegs so perhaps no data was lost.
View 8 Replies
View Related
Jul 30, 2013
chromatic aberration correction has changed since CS3. It's limited to ONE pixel correction, or what ? It seems i cant get strong cyan/red bands anymore, i used it as an artistic effect and i need it back. I'm not interested in manual workflow (moving manually RGB channels),
View 1 Replies
View Related
Jan 6, 2014
When I make adjustments to a photo in Ligthroom, such as Lens Correction, those adjustments are not applying to the image when I pull it into Photoshop.
All the sudden it just stopped carrying the adjustments over.
View 3 Replies
View Related
Aug 18, 2012
Lightroom adjustments that I make to an image are not being carried over when I "Edit in Photoshop CS6". I'm using LR 4.1 and ARC 7.1.
View 5 Replies
View Related
Jun 10, 2013
I did not download the LR5 beta. This is the new update - upgraded my LR4 catalogue today, now trying LR5. In Develop mode. I'm getting some seriously weird issues.
Example. Adjust exposure by +33 on one image. Hit Cmd Right to go to next image. The next image automatically adjusted itself to +33 to match. WTF?
Changed an image to B&W. Before even going to the next image - the one next to it changed to B&W automatically - to match. Even had the same burn masks etc.
It's like it has Auto Sync on or something - but it isn't.
I noticed that if I adjust by +33 then hit enter. Then go to the next image - the setting isn't carried over. I also noticed that sometimes the preview is carried over. But if I hit the history and go back one state - then back to the last state - it corrects itself. But in the case of one B&W image - it did not. It lost my history of ever having changed the image to B&W. Really odd and worrying.
View 7 Replies
View Related
Jan 10, 2013
One of the great features of the Sony NEX-7 is that the NEX-7 makes automatic lens corrections for vignetting, chromatic aberration and distortion problems. These corrections are written to the file and the preview. However, when converting these images from ARW to DNG the correction data seems to be lost, and the images revert to their uncorrected state. This requires all images to then be re corrected with the Adobe lens profiles, which is both tedious, an extra step, and also seems to produce results that are somewhat less optimal than the original corrections made by the camera.
Should not the ACR Converter and Lightroom retain the lens corrections made by the camera?
View 19 Replies
View Related
Feb 8, 2014
on a black and white photo in Lightroom 5, how do I remove a white aberation fringe in my photo.
View 5 Replies
View Related
Jun 23, 2013
I have a preset in Lightroom set to export photos with the long-edge at 900px in length. Whenever I use the resize feature, the photos that result have horrible noise and I don't know what to do about it. I can export the images at full size without any noise, then use Photoshop CS5 to resize the images and still have cleaner photos.
Here's an example.
The following export preset it set as such:
- Export as JPEG
- Quality = 100%
- DPI = 300
- Resize to 900px on long-edge
The first photo is exported via Lightroom 5 with the above settings, then directly uploaded to Imgur.
The second photo only has the Resize feature disabled in Lightroom. It was then resized to 900px on long-edge in Photoshop CS5 and the uploaded to Imgur.
The only difference between these two photos is which program was used to shrink them down to 900 x 600px.
Here is link to the referenced photos: [URL]
What do you think could be causing this? Since the only difference between the photos is which program resized them, all I can think is that it's an LR5 issue...
View 1 Replies
View Related
Aug 23, 2013
for some weird reason all of a sudden the adjustments I make to my images in ACR are not carrying over when I open them in CS5. I've cheked the Adobe website to make sure I have the latest versions of both ACR & CS5 & I do. Any thoughts on how I can correct this? Very frustrating to adjust 10 - 15 wedding images in ACR then they're right back to the original image when I open them in CS5.
View 11 Replies
View Related
Dec 25, 2012
I'm using Photoshop CS5.5 and I've placed a layer with my watermark. I'm trying to apply a plastic wrap effect, or many different artistic effects. But I cannot preview what it will look like prior to carrying out the artistic filter.
I think I may have to rasterize the layer or something like that. Basically I carry out the filter. nothing changes.Older versions you could see what was going to happen before you carried it out.
View 1 Replies
View Related
Dec 21, 2013
I don't have either the lens correction tab or detail tab listed to the right side in develop module. It also appears any standard presets that were there are gone.
View 3 Replies
View Related
Sep 14, 2013
No matter what I do, anytime I try to use the red-eye correction tool, I get the message "Unable to find red eye". Even in pictures where the red eye is huge and clearly visible. Has anything changed in LR 5 that would cause this? I have Red Eye Correction enabled.
View 4 Replies
View Related
May 28, 2012
Is there a way of setting the "Lens correction" in LR3 to be on by default? as it is now I have to se tit for each image.
View 4 Replies
View Related
Dec 28, 2013
When I try to use Lens Correction in LR 5 I get a restricted number of profiles, none of which match my standard Nikon 28-300mm zoom. However when I open the images in Camera Raw I have automatic access to this profile. I also have access to a custom Fuji profiles which I have downloaded and installed with Adobe Profile Downloader but which don't appear in the Lightroom module. Developing my images in Camera Raw before using Lightroom?
I had always assumed that Camera Raw formed the basis of Lightroom.
View 3 Replies
View Related
Jan 3, 2014
In Develop module I'm not able to see the Lens Correction menu. I am loading the 5.3 update.
View 2 Replies
View Related
Aug 24, 2013
It was there before but now I cant find the "Lens Correction" area in the Develop Module of LR5. What i can do to activate it again?
View 2 Replies
View Related
Sep 7, 2013
We have a white balance tool in the develop panel, but I could not find a way for setting black point in LR ...
How can I set the darkest point to the neutral color?
View 1 Replies
View Related
