Photoshop :: Camera Raw - Chromatic Aberration Controls Have Disappeared
Feb 24, 2013
I am using bridge CS5 (version 4.0.5.11) and working in camera raw. In the lens corrections tab in the manual control I have lost my chromatic Aberration controll, this is to say, it has disappeared. I now see under the manual tab I now see the transform controlls, below that I see lens vignetting. The chromatic aberration conrolls have disappeared, where have they gone and can I get them back and how do I do that?
View 5 Replies
ADVERTISEMENT
Dec 19, 2012
CS5 camera raw, under lens correction tab, profile, no chromatic aberration slider. Under the manual tab, same thing. Do I need to download an update?
View 2 Replies
View Related
Nov 7, 2012
I am a commercial photographer and have use Lighroom since it was introduced. I just updated Photoshop to CS6 and found that the Chromatic Aberration corrections I apply to an image in Lightroom 4.2 are NOT following the image when I open the image in CS6 using Command-E to open the image from Lightroom. All other Lightroom corrections have been applied, only the Chromatic Aberration correction is missing. One other piece of information is that I convert all RAW files to DNG when I inport the RAW file into Lightroom. I had none of these issues when I was using Photoshop CS5.
View 3 Replies
View Related
Jun 12, 2013
I have recently been playing with removing CA from pictures. I have a particular RAW file picture of the inside of a church dome. I have made a number of Develop Module adjustments. There is purple and green fringing along the window frames and the columns by the windows, which I would like to remove.
I can remove most of this fringing by checking the Remove Chromatic Aberration box and then either use the dropper tool or just slide the Amount sliders a bit for both the Purple and the Green fringes. I do see a noticeable difference.
However, I have a problem Exporting the resultant file. Right before I check the Remove CA box, I can Export the RAW file as a JPEG, with, say, 80% quality, and leaving size/dimensions unchanged.
After I check the Remove CA box, however, when I try to Export the file, I get 1 of 2 results. One result, probably more common, is that it appears as if the file is being Exported; however, after a bit of time, I get an error message that says "Not Enough Memory." The second thing which can happen is that it appears as if a file is being Exported, but there is no disc activity, and, after it looks as if the Export completes, there is no file in the folder I specified. If I try Exporting again, leaving everything exactly the same, I get no message at all telling me that the file already exists, confirming that it had not been exported the first time.
I have tried greatly reducing JPEG quality (down to 40% I think), and I still cannot Export. I have tried lowering the dimensions down to 1920 pixels on the long side, and I have tried restricting the file size to about 5000K. Nothing so far has allowed me to Export this file.
Yet, if I go back in the history, right before I checked the Remove CA box, I can Export that file.....although the only way I can do that is to first exit Lightroom and then relaunch it.
My PC is about 4 years old; I have 4 GB of memory. Maybe I need more, but even by trying to greatly reduce the file size, I have these problems.
View 2 Replies
View Related
Nov 6, 2011
The subject line basically says it all. The chromatic aberration tool in Aperture doesn't do much for me. Is there one in PSE 10?
View 11 Replies
View Related
Apr 29, 2012
LR4.1 RC2 for Mac.
In the Develop Module under Lens Corrections, the CA option is no longer present. It was there in the previous RC. In the Sync Settings, it is a still a selectable option.
View 1 Replies
View Related
Mar 7, 2012
I must state that I am miffed that manual adjustment of C.A. has disappeared in LR4. This would have been easier to understand if some commonly used lenses that are not the latest release had profiles available. For example, I shoot the older version Nikkor Micro D 60mm and 105mm lenses for underwater photography. I built a preset to correct the C.A., which I now assume won't work. The automatic setting does not entirely remove it. Is there any way to deal with this aside from adding an extra step and editing CA in Photoshop (which doesn't do a great job of it, either)?
View 3 Replies
View Related
Jun 21, 2013
I work with GIMP 2.8.4 on Windows XP. In order to remove strong lateral chromatic aberrations I tried the CA plugin version 3x What I saw in the preview looked good, but when I pressed the OK button no result appeared. What is the reason? How to install this plugin on Suse Linux step by step.
View 4 Replies
View Related
Jun 27, 2012
I've just recently found that new chromatic aberration tools kills settings for old chromatic aberration tools. Lets say I have a PV2010 photo with adjusted sliders for chromatic aberration reduction and selected defringe "all edges".Now I'm importing this photo to LR 4.1. I'm not updating process version!
Photo is automatically updated by Lightroom to new CA controls (note it still PV2010 photo). Well, I must say the the results are superb - they are the same as I was achieving with manual sliders, but now with only one click. But the problem is - Lightroom says that metadata have been changed, and I am writing back changes to XMP.But now XMP contains settings for new CA tools, but settings for old CA tools are LOST.
So if I want to open this image in ACR 6.6, or send it to someone with older LR version I end up with completely resetted CA settings, because ACR 6.6 does not have new CA tools, and settings for old tools are killed by LR 4.1 - they are just removed from XMP. So I am loosing CA removal settings completely when opening image in earlier version of application. And I am NOT updating process version!
View 11 Replies
View Related
Oct 29, 2012
I am having a problem with LR 4.2 in correcting chromatic aberation. When I try to use the "defringe tool" I receive the following error message, "Cannot set the purple or green fringe color. Please sample a representative fringe color agian." However, I can see the sampled pixel in the pallette and read the RGB values.
View 4 Replies
View Related
Apr 28, 2012
Unchecking the "Remove chromatic aberration" after it had been checked and adjusted does not work in the sense that the removal remains active.
View 3 Replies
View Related
Jan 27, 2013
The chromatic aberration check box that should be present under lens corrections is missing from my LR4 program, how to get it back
View 6 Replies
View Related
Jan 15, 2013
Why can't I find "Remove Chromatic Aberration" under Lens Correction?
View 2 Replies
View Related
Mar 8, 2012
So why did you remove the possibility to correct ca manually?
View 7 Replies
View Related
May 28, 2013
The controls that used to appear on the workspace after the pattern fill tool is selected are no longer accessible. I don't know the name of this control, but it has handles allowing a pattern fill to be re-sized and rotated within an object.
View 14 Replies
View Related
May 2, 2011
The same keys seem to be used to move the viewport camera, but the behavior of the viewport camera seems to have changed. For example, press Z to focus on an object, middle-drag the camera off to the side in one direction, and alt+middle-dragging used to just rotate the viewport camera around a new focus point. Now, it's almost like the viewport camera is getting swung around on a rope around the original focus point.
How can I change it back to the original way?
View 1 Replies
View Related
Feb 11, 2014
The main develop module controls have disappeared from the develop window. How do I recover them? I'm working with Lightroom 5.3. The missing controls are the sliders for exposure, contrast, clarity, etc. I must have inadvertantly clicked something that made them disappear but nothing I've tried brings them back. I've never had this experience in the years I've been using Lightroom (since version 1.1).
View 2 Replies
View Related
Mar 14, 2012
Camera Raw disappeared Mac OS 10.6.8 CS5 Extended v12.0. So has my Microtek Scanner (crashes). I've been told that upgrading to OS 10.6.8 caused corruption to the drivers. But both worked for long time with 10.6.8.
I had Camera Raw but haven't used it for long time. Now it is just not there. I reinstalled it and today, installed the patch. But still no Camera Raw.
View 2 Replies
View Related
Jun 4, 2008
I'm working my way through Scott Kelby's 7-Point book and in lesson 7, I'm directed to adjust the clarity slider in Camera Raw but it's just not there! I see vibrance and saturation but no clarity. Can anyone help me find this baby?
View 6 Replies
View Related
Aug 13, 2012
I opened up some photos to edit this evening, and have discovered that the camera profile options are gone. All that is available are the two ACR ones. I shot with the same camera and lens as I have before (Nikon D40 and 50mm), and I double checked, and I shot everything in RAW. I don't know what's going on. I'm running Windows 7 64 bit, and have LR 3.6. I would really like to use Camera Standard and Camera Vivid.
View 2 Replies
View Related
Jan 30, 2013
Does PS use the sidecar files to correct previously processed raw images where the lens aberration correction box had previously been checked when processed in ACR? I sometimes dial back the lens aberration correction if it adversly effects shaprness in the corners.
When I merged 3 cr2 raw files to hdr the lens geometric aberration was corrected--but perhaps that is always done anyway?
Also I had previously processed the 3 raw files in ACR and left 16 bit files open in PS. PS warned that it is best to merge the raw files themselves, though I couldn't detect much loss of dynamic range if the 16 bit files in PS were merged or the raw files themselves. I had never saved the files yet as 8 bit jpegs so perhaps no data was lost.
View 8 Replies
View Related
Aug 26, 2012
I am learning Photoshop from an excellent book by Scott Kelby. He has a section which clearly explains the use of Chromatic sliders. All I have is a check box. How do I get to these sliders? I have CS5.
View 2 Replies
View Related
Jan 28, 2009
I have a PDF target job containing a few hundred patches specified in the Lab colour space. I can import this into Photoshop specifying the 'Lab Color' mode and when I look at the Lab values of each patch they are exactly as the PDF says.
The problem comes when I choose to convert the image to a profile (any profile) because Photoshop appears to do no chromatic adaptation during the conversion. It is as though D50 is assumed, since that is the ICC standard. I can change X and Z values of the white point in the PDF to any numbers and the conversion is always unchanged. If the Y value is changed to any number other than 1, the Lab elements are not rendered in Photoshop.
Is there any way I persuade Photoshop to honour the chromatic adaptation implied by non-D50 white points? I am using CS2 on Windows.
View 2 Replies
View Related
Dec 16, 2008
I just got started in digital photography and have some experience in PS from a class i took in school.
I used to shoot film exclusively and I LOVED my crappy little plastic lensed camera called a Holga which produced dreamy focus, tons of vignetting, and some Chromatic Abberations. I really want to reproduce the effects given by this camera with images I take with my DSLR.
I can figure out how to vignette and create soft focus effects but how can I create chromatic abberations such as this one?
I have found a billion ways to get rid of abberations but no way to create one. Are there any plugins, actions or filters I can download somewhere?
View 4 Replies
View Related
Mar 17, 2004
What can be done to reduce or alter chromatic luminance qualities in photographic subjects of people (skin tones) and liquids (beverages, water, ice, etc.)?
View 2 Replies
View Related
Nov 8, 2012
I've used Chrome Acute in Elements 7 with success, but I'm not sure that I can plug it into CS6, not accordingly to Chrome Acutes homepage, so what do i do?
View 2 Replies
View Related
May 21, 2012
how do you manually adjust chromatic aborations in CS6
View 8 Replies
View Related
Jul 30, 2013
chromatic aberration correction has changed since CS3. It's limited to ONE pixel correction, or what ? It seems i cant get strong cyan/red bands anymore, i used it as an artistic effect and i need it back. I'm not interested in manual workflow (moving manually RGB channels),
View 1 Replies
View Related
Apr 18, 2012
How to intentionally creating color aberration with GIMP ?
View 2 Replies
View Related
Feb 8, 2014
on a black and white photo in Lightroom 5, how do I remove a white aberation fringe in my photo.
View 5 Replies
View Related
Jun 23, 2013
I have a preset in Lightroom set to export photos with the long-edge at 900px in length. Whenever I use the resize feature, the photos that result have horrible noise and I don't know what to do about it. I can export the images at full size without any noise, then use Photoshop CS5 to resize the images and still have cleaner photos.
Here's an example.
The following export preset it set as such:
- Export as JPEG
- Quality = 100%
- DPI = 300
- Resize to 900px on long-edge
The first photo is exported via Lightroom 5 with the above settings, then directly uploaded to Imgur.
The second photo only has the Resize feature disabled in Lightroom. It was then resized to 900px on long-edge in Photoshop CS5 and the uploaded to Imgur.
The only difference between these two photos is which program was used to shrink them down to 900 x 600px.
Here is link to the referenced photos: [URL]
What do you think could be causing this? Since the only difference between the photos is which program resized them, all I can think is that it's an LR5 issue...
View 1 Replies
View Related
