LR4.1 RC2 for Mac.
In the Develop Module under Lens Corrections, the CA option is no longer present. It was there in the previous RC. In the Sync Settings, it is a still a selectable option.
The chromatic aberration check box that should be present under lens corrections is missing from my LR4 program, how to get it back
View 6 Replies View RelatedCS5 camera raw, under lens correction tab, profile, no chromatic aberration slider. Under the manual tab, same thing. Do I need to download an update?
View 2 Replies View RelatedI have recently been playing with removing CA from pictures. I have a particular RAW file picture of the inside of a church dome. I have made a number of Develop Module adjustments. There is purple and green fringing along the window frames and the columns by the windows, which I would like to remove.
I can remove most of this fringing by checking the Remove Chromatic Aberration box and then either use the dropper tool or just slide the Amount sliders a bit for both the Purple and the Green fringes. I do see a noticeable difference.
However, I have a problem Exporting the resultant file. Right before I check the Remove CA box, I can Export the RAW file as a JPEG, with, say, 80% quality, and leaving size/dimensions unchanged.
After I check the Remove CA box, however, when I try to Export the file, I get 1 of 2 results. One result, probably more common, is that it appears as if the file is being Exported; however, after a bit of time, I get an error message that says "Not Enough Memory." The second thing which can happen is that it appears as if a file is being Exported, but there is no disc activity, and, after it looks as if the Export completes, there is no file in the folder I specified. If I try Exporting again, leaving everything exactly the same, I get no message at all telling me that the file already exists, confirming that it had not been exported the first time.
I have tried greatly reducing JPEG quality (down to 40% I think), and I still cannot Export. I have tried lowering the dimensions down to 1920 pixels on the long side, and I have tried restricting the file size to about 5000K. Nothing so far has allowed me to Export this file.
Yet, if I go back in the history, right before I checked the Remove CA box, I can Export that file.....although the only way I can do that is to first exit Lightroom and then relaunch it.
My PC is about 4 years old; I have 4 GB of memory. Maybe I need more, but even by trying to greatly reduce the file size, I have these problems.
I must state that I am miffed that manual adjustment of C.A. has disappeared in LR4. This would have been easier to understand if some commonly used lenses that are not the latest release had profiles available. For example, I shoot the older version Nikkor Micro D 60mm and 105mm lenses for underwater photography. I built a preset to correct the C.A., which I now assume won't work. The automatic setting does not entirely remove it. Is there any way to deal with this aside from adding an extra step and editing CA in Photoshop (which doesn't do a great job of it, either)?
View 3 Replies View RelatedI've just recently found that new chromatic aberration tools kills settings for old chromatic aberration tools. Lets say I have a PV2010 photo with adjusted sliders for chromatic aberration reduction and selected defringe "all edges".Now I'm importing this photo to LR 4.1. I'm not updating process version!
Photo is automatically updated by Lightroom to new CA controls (note it still PV2010 photo). Well, I must say the the results are superb - they are the same as I was achieving with manual sliders, but now with only one click. But the problem is - Lightroom says that metadata have been changed, and I am writing back changes to XMP.But now XMP contains settings for new CA tools, but settings for old CA tools are LOST.
So if I want to open this image in ACR 6.6, or send it to someone with older LR version I end up with completely resetted CA settings, because ACR 6.6 does not have new CA tools, and settings for old tools are killed by LR 4.1 - they are just removed from XMP. So I am loosing CA removal settings completely when opening image in earlier version of application. And I am NOT updating process version!
I am a commercial photographer and have use Lighroom since it was introduced. I just updated Photoshop to CS6 and found that the Chromatic Aberration corrections I apply to an image in Lightroom 4.2 are NOT following the image when I open the image in CS6 using Command-E to open the image from Lightroom. All other Lightroom corrections have been applied, only the Chromatic Aberration correction is missing. One other piece of information is that I convert all RAW files to DNG when I inport the RAW file into Lightroom. I had none of these issues when I was using Photoshop CS5.
View 3 Replies View RelatedI am having a problem with LR 4.2 in correcting chromatic aberation. When I try to use the "defringe tool" I receive the following error message, "Cannot set the purple or green fringe color. Please sample a representative fringe color agian." However, I can see the sampled pixel in the pallette and read the RGB values.
View 4 Replies View RelatedUnchecking the "Remove chromatic aberration" after it had been checked and adjusted does not work in the sense that the removal remains active.
View 3 Replies View RelatedWhy can't I find "Remove Chromatic Aberration" under Lens Correction?
View 2 Replies View RelatedSo why did you remove the possibility to correct ca manually?
View 7 Replies View RelatedI am using bridge CS5 (version 4.0.5.11) and working in camera raw. In the lens corrections tab in the manual control I have lost my chromatic Aberration controll, this is to say, it has disappeared. I now see under the manual tab I now see the transform controlls, below that I see lens vignetting. The chromatic aberration conrolls have disappeared, where have they gone and can I get them back and how do I do that?
View 5 Replies View RelatedI work with GIMP 2.8.4 on Windows XP. In order to remove strong lateral chromatic aberrations I tried the CA plugin version 3x What I saw in the preview looked good, but when I pressed the OK button no result appeared. What is the reason? How to install this plugin on Suse Linux step by step.
View 4 Replies View RelatedThe subject line basically says it all. The chromatic aberration tool in Aperture doesn't do much for me. Is there one in PSE 10?
View 11 Replies View Relatedon a black and white photo in Lightroom 5, how do I remove a white aberation fringe in my photo.
View 5 Replies View RelatedI have a preset in Lightroom set to export photos with the long-edge at 900px in length. Whenever I use the resize feature, the photos that result have horrible noise and I don't know what to do about it. I can export the images at full size without any noise, then use Photoshop CS5 to resize the images and still have cleaner photos.
Here's an example.
The following export preset it set as such:
- Export as JPEG
- Quality = 100%
- DPI = 300
- Resize to 900px on long-edge
The first photo is exported via Lightroom 5 with the above settings, then directly uploaded to Imgur.
The second photo only has the Resize feature disabled in Lightroom. It was then resized to 900px on long-edge in Photoshop CS5 and the uploaded to Imgur.
The only difference between these two photos is which program was used to shrink them down to 900 x 600px.
Here is link to the referenced photos: [URL]
What do you think could be causing this? Since the only difference between the photos is which program resized them, all I can think is that it's an LR5 issue...
The "Quality and Media" setting is missing from the print dialog box using Illustrator. It's there in Acrobat. How do I fix it?
Adobe Illustrator CS 5 Mac OS X 10.7.4
Does PS use the sidecar files to correct previously processed raw images where the lens aberration correction box had previously been checked when processed in ACR? I sometimes dial back the lens aberration correction if it adversly effects shaprness in the corners.
When I merged 3 cr2 raw files to hdr the lens geometric aberration was corrected--but perhaps that is always done anyway?
Also I had previously processed the 3 raw files in ACR and left 16 bit files open in PS. PS warned that it is best to merge the raw files themselves, though I couldn't detect much loss of dynamic range if the 16 bit files in PS were merged or the raw files themselves. I had never saved the files yet as 8 bit jpegs so perhaps no data was lost.
How to intentionally creating color aberration with GIMP ?
View 2 Replies View RelatedI am learning Photoshop from an excellent book by Scott Kelby. He has a section which clearly explains the use of Chromatic sliders. All I have is a check box. How do I get to these sliders? I have CS5.
View 2 Replies View RelatedI have a PDF target job containing a few hundred patches specified in the Lab colour space. I can import this into Photoshop specifying the 'Lab Color' mode and when I look at the Lab values of each patch they are exactly as the PDF says.
The problem comes when I choose to convert the image to a profile (any profile) because Photoshop appears to do no chromatic adaptation during the conversion. It is as though D50 is assumed, since that is the ICC standard. I can change X and Z values of the white point in the PDF to any numbers and the conversion is always unchanged. If the Y value is changed to any number other than 1, the Lab elements are not rendered in Photoshop.
Is there any way I persuade Photoshop to honour the chromatic adaptation implied by non-D50 white points? I am using CS2 on Windows.
I just got started in digital photography and have some experience in PS from a class i took in school.
I used to shoot film exclusively and I LOVED my crappy little plastic lensed camera called a Holga which produced dreamy focus, tons of vignetting, and some Chromatic Abberations. I really want to reproduce the effects given by this camera with images I take with my DSLR.
I can figure out how to vignette and create soft focus effects but how can I create chromatic abberations such as this one?
I have found a billion ways to get rid of abberations but no way to create one. Are there any plugins, actions or filters I can download somewhere?
What can be done to reduce or alter chromatic luminance qualities in photographic subjects of people (skin tones) and liquids (beverages, water, ice, etc.)?
View 2 Replies View RelatedI've used Chrome Acute in Elements 7 with success, but I'm not sure that I can plug it into CS6, not accordingly to Chrome Acutes homepage, so what do i do?
View 2 Replies View RelatedLR states that my photos are missing, but none of my photographs seem to be missing, ie, there are no question marks and all photos can be found, edited, and exported in the normal fashion.
View 2 Replies View Relatedhow do you manually adjust chromatic aborations in CS6
View 8 Replies View Relatedchromatic aberration correction has changed since CS3. It's limited to ONE pixel correction, or what ? It seems i cant get strong cyan/red bands anymore, i used it as an artistic effect and i need it back. I'm not interested in manual workflow (moving manually RGB channels),
View 1 Replies View RelatedHow do I go about setting up LR4 for two monitors?
View 1 Replies View Related1) Additional Zoomrates, such as 1:1.41 - to view an image at 1/2 of the side length.The best would be configurable zoom rates. That should be really easy to do.
2) Zoom to a fixed MP setting. I want to view all my images at 6MP, 12 MP or any other. This would be useful to check the details visible at a certain printsize.
3) Global switch to disable De-Noise rendering. This would speed up handling of D800 files a lot. De-Noise seems to take up most of the performance.
4) Possibility to view original, embedded JPEG Data in JPEG. (i.e. as reference)
5) Auto Histogramm:This function should move the left (black) and right (white) point of the curve to clip black and white at a minimum.
6) Sort and filter images by width and / or height in pixels
7) Sort and filter images by megapixel value
8) Autostack files with same name, such as xxx.NEF + xxx.JPEG. This is useful in case images were not combined at import.
9) When a folder is synchronized missing JPEGs should be removed from RAW+JPEG auto stacks.I see no way to reset this property, although it does not seem to disturb LR that the JPEG is gone.
10) Possibility to do a no-copy export. The purpose: copy the original file to the same name (which of course does nothing) and start an external application (such as RAW converter) with it.
Need setting up my email in lightroom. For some reason it's not connecting.
View 2 Replies View RelatedIs is possible to include the camera WB setting (e.g. daylight, cloudy etc, or temp K) in the LR metadata?
View 1 Replies View Related