When I try to run in selective startup mode with all my non-Windows startup item turned off, Photoshop (CS2) tells me I need to have administrator status, but I do. ? Can I run in selective startup mode or not? andIf so, there must be an Item that I need to turn on.....
View 2 Replies
I get the following message almost, but not every, time that I start Photoshop.
b This application has failed to start because vfzcore.dll was not found. Re-installing the application may fix this problem.
I have tried reinstalling Photoshop. But this does not help. I often also get a windows error after photoshop is closed saying that it did not shut down properly.
I suspect that the vfzcore.dll error is due to some 3rd party plug-in. But does anyone have any ideas? These error do not appear to affect the performance of photoshop that I can tell. Everything that I use works fine and it never bombs off (except after closing the program out). But having to hit "OK" at the error dialog every time the program starts up is annoying.
I am unable to print from PSE11 editor. i receive an error message stating 'photoshop cannnot print this document'. I can print standard photos from the organizer but any edits I make in editor are unable to be printed. I have checked the printer, it works fine for every other application. I have uninstalled and re-installed PSE11 but still no luck. The problem appears to have started since I installed a new printer (Epson XP). Photoshop is recognising the new printer from the print screen.
Â
I have also tried saving my works in other formats (e.g. PDF) and saved to my desktop. I can print these but the quality is quite poor.
My PS don't want to understand me! Every time i close brush panel, save document and every time after starting PS i see this panel. In preference i try picking "Remember Panel Location", but it's not working. And this software don,t save last color mode, i start PS with grayscale mode.
View 3 Replies View RelatedI'm trying to convert VHS to DVD. I have VS4Pro and a Hauppauge Collosus capture card and I get the error "unable to switch to cpature mode" when I'm in the capture tab and click capture video. VS4Pro recognizes the card but pops up the error "unable to switch to capture mode". In device manager, the drivers for the card appear to be installed/operating correctly.
View 2 Replies View RelatedI have recently updated LR to 4.3 and am trying to run a contact sheet. I've specified "Draft Mode Printing" but LR continues to try and render all the images. Each page has 108 cells and I'm working with RAW images so it's taking way to long.Â
Â
In the past it was able to produce and print these types of contact sheets in just a few moments.Â
VS starts in Edit Mode. After connecting the video camera by a iLink cable to PC and switching the camera to Play mode, clicking on tab "Capture" an error message appears: "Unable to switch to Capture Mode. Check if your video capture driver is working properly" Question: How do I do it? I am not a computer savvy person, just want to capture, edit and finally burn my videos taken with the camera.
View 2 Replies View RelatedFor some reason, I'm not able to get my Mask Mode button "turned on" -- the Help section pointed to "Window > Mask mode on" -- but even though a shape / object / photo is selected, mask features always remain unavailable.
View 2 Replies View RelatedI have problems with displaying images in develope mode. On the main screen it keeps simply black, on the second screen (scaled fullscreen view) is shows blurry and not sharp...
I'm using LR 4.4. 64bit PC, yesterday I tried an installation of LR 5 beta and got the same problem with showing images
If I have project properties set to anything but the default, I am unable to scrub through a clip when in clip mode if the clip has the second icon indicator, as shown in the screen grab below. This second icon (double diagonal frames) does not appear immediately. Before it appears, I can scrub in clip mode, but after it appears, I cannot. What that icon represents? My video files are from Canon HV20 (m2t 1440x1080) and my project properties match them.
I have a suspision that it has something to do with proxy files, and that once the proxy file is made, I lose clip scrubbing.
I just tried turning off smart proxy, and wouldn't you know it, I can scrub in clip mode.
I restarted X4 and clip scrubbing is fine. I enabled Smart Proxy, and clip scrubbing doesn't work again.
I just installed Lr4 with update 4.3. . First when i click a photo in develop mode it shows up very small. If I adjust the zoom the photo does erratic things. It gets big but with massive distortion then it will clear up but will have an effect like looking into a bunch of mirrers. Also i can not get the adjustment tools to work at all.
View 5 Replies View RelatedI saw a pic which was converted to Black n white except this one object in it.
For example: If you have a bunch on red roses.. only one amoung them is in color, everything else is black n white. Gives picture a unique look!
How can this be done in PS? I've just started using PS so please excuse if this is a stupid question.
how to do this chore. Worse, I know it must be so simple that its laughable. I haven't ever needed to do it though.
I have an image that is great [in my eyes] but in the middle of the image an area of tree foliage shows that is so tightly focused, it distracts. How do I selectively soften, fuzz, blur [likely] or what ever only that portion. I have fought this since Sept and haven't found an answer that feels right.
I'm trying to make a photo monochrome, but keep the person with the originial colors (so background is monochrome).
View 3 Replies View RelatedDoes CS5 have this option and if so, how do you use it?
View 1 Replies View RelatedI am trying to apply a selective blur to a photograph. What I am doing is using the Polygonal Lasso and select around my item. Then I try to use the Ctl +I to invert, but when I do that, the image inside the lasso tool looks polorized. What I am trying to get. it using the Gaussian Blur to blur everything in the background and not the item that I have applied the lasso tool to, everything in the lasso should be clear and everything outside (the background) should be blured.
I am getting this tio from a book called "Retouching cookbook for digital photographers" and it is a simple tip, but it is not turning out.
I'm in class and the teacher just showed us Selective Color. I usually use Hue Saturation to enhance colors or color correction. Is there a diffence between the two tools?
View 4 Replies View RelatedHow did they do that?
View 4 Replies View RelatedIn my one file I am unable to do copy and past command in paragraph text mode in one particular paragraph text handle. Can't find the reason. But in same file with new artistic or paragraph text handle I can do copy and past.
View 3 Replies View RelatedI'm running photoshop CS3 in a macbook pro under windows xp, and I want to add color to something in my picture. I used "selective color" (Layer > adjustments > selective color) to add color to a whitish-looking robe that is worn by a character that I created in photoshop earlier, but even when I move the slider to +100 % the color is still too washed out (will add images later). I know from experience using Photoshop CS 3 in my old laptop (a HP Compaq Presario X6000 running windows XP)Â that to get the depth of color I want in my character's robe, I shouldn't have to move the slider all the way to +100 %. Is there any way to fix this so I can get the same color depth I got when I used my old laptop? P.S. When I choose "selective color" a dialogue box comes up. I left the settings in this dialogue box as they are seen in the image, and clicked "ok".
View 2 Replies View Relatedis there a way to select which fonts show up in photoshop (without deleting them)? I want to keep as few as possible so I can find the ones I like quickly.
Now another thing I dont get is all the different font types. Type 1, 2, 3 TrueType, OpenType....
What's the difference between all of these, which should I be using, and how can I tell what my font types are?
i was using ps cs5 but i switched to pse 10 but i can't find the selective color option.
View 1 Replies View RelatedI tried to find good information about selective color tool about absolute vs relative
Â
i 'm reading
[URL].............
Â
but i did not understand.
ps i would like to have cs6 manual in pdf.
My camera software dumps jpegs and raw files into a single folder.Â
Â
I am wanting to batch (automate) process the jpegs in said folder, but not the camera's raw files. How do I employ an action that will only run on the jpegs in the folder and skip the raw files?
I work on an image and use Selective Color to make adjustments, then, out of nowhere, the panel no longer operates.
I can no longer select the colors from the drop down menu for adjustments because the menu is grayed out...here is a photo to demonstrate...
In a file with several layers, my monitor temporarily blacks out when adjusting colors in a Selective Color adjustment layer. Is there a solution?I changed the Advanced Graphics Processor Settings to "Normal" from "Advanced." Seems better but am I losing performance?
Â
Adobe Photoshop Version: 14.1.1 (14.1.1 20130910.r.414 2013/09/10:23:00:00) x64
Operating System: Windows 8 64-bit
Version: 6.2
System architecture: AMD CPU Family:15, Model:1, Stepping:2 with MMX, SSE Integer, SSE FP, SSE2, SSE3, SSE4.1, SSE4.2
[code]....
I'm possibly showing my ignorance here but this is what I'm trying to do. I want to change the colour balance of a part
View 2 Replies View RelatedCS6 is consistenly locking up in the selective color and curves dialog. i.e. I come to the selective color dialog and try to choose the reds and it is stuck on whites, which I used last and I can't change it. I have to quit and relaunch. The same thing is happening with the Curves dialog. I can edit the RGB curve , but can't select the R, G or B channels until I relaunch. It works for a while and then it just stops.
View 4 Replies View RelatedWe are giving Corel VideoStudio Pro X6 a trial. We recently attended a concert a client of ours performed. We video recorded this performance using an iphone 4s cell phone and then downloaded to a Toshiba laptop which operates using Windows Vista Home Premium 32bit . We video recorded one song that we wish to upload to YouTube. Our question is: how can we delete sections of the video portion of the recorded file without deleting the audio portion, and then add wanted video clips which have no audio ? Our goal is to replace sections of the video portion of the file with wanted "silent" video clips from other files without changing the original audio track and original timeline in any way. Can this be done using Corel VideoStudio Pro X6? We are hoping that Corel VideoStudio Pro X6 is the video editing software for us.
View 1 Replies View RelatedI just got Lightroom 4 last night. When I was in college, I used Illustrator and, we learned how to do selective coloring. I have no clue what I'm doing in lightroom 4 to do this. The set up is way more intricate than I anticipated. I've searched for videos online and, they are all for older versions of Lightroom and do not work. how to use selective coloring in Lightroom 4??
View 7 Replies View RelatedIn the Printer Settings drop down menu both Color Mode and Print Mode are grayed-out. This just happened I cannot think of anything I've done differently.
I'm using OS 10.6.8 and the latest Epson drivers for the 3880. I have re-installed both PS and the Epson drivers. If I print from Acrobat Reader everything seems to work fine, this only is happening in Photoshop CS5.
