way to position content in photoshop as you would in say flash by plugging in specific pixel information? say i have a rectangular selection and I want to move it exactly 535 pixels to the right. or move all the layers content 75 pixels to the left.
View 2 RepliesI've got a series of meteorological satellite pictures (updated every 15 minutes), which indicate rainfall by means of a color code (blue means weak rain, red is heavy rain; the scale also includes green and yellow in-between). I wish to know the average daily rainfall on a specific spot in the map, which corresponds roughly to a single pixel in the picture, whose X,Y coordinates I've already determined.
Â
Now, I could manually select this pixel in each of the pictures and see which color it was in that specific moment of the day; however, there are too many pictures (96 every day, to be precise), and I began wondering if there's any way to automate this process - that is, I would need Photoshop to select this specific pixel in each image, and determine which color it is.
Suppose I have a 300px x 300px image and I need to choose a part of that image to crop to 150px x 150px without resampling. (I need that hypothetical 150px x 150px so it fits a pre-defined area in a web page layout.)
I know I can take the crop tool to the image and view the "Info" tab to get my 150px x 150px. But that requires a fine touch and some trial and error to get the exact crop I want.
Is there a way to specify a particular size to crop or select and then move that selection around in the image to find the best crop? (Photoshop 7.0)
I'd like to create an action that spot heals with a specific brush, with specific brush parameters and centered on a specific pixel - is this possible? I've got 16MP image files coming from a camera with a hot pixel, and I'd like to just run an action on import rather than heal it manually every time.
View 4 Replies View RelatedI have a set of drum scans of medium format film images. The pixel dimensions of the scans vary slightly. But they all consist of images of the same frame size, with borders around the image (scanned film outside the image.) All of the scans were done at 4000 pixels per inch, at 100 percent.
Â
For example, the pixels dimensions of one scan is 10492 x 6907, another is 10390 x 6968, and another is 10483 x 6976.
Â
I want to crop all of them to 10200 x 6738 pixels. I want to delete the cropped pixels, and I do not want any scaling to take place. I want to preserve the original metadata (the scanner model, pixels per inch, etc.); in other words, I want to modify the files (or copies of the files), not create new files. The print size does not matter.I've tried several approaches, and none of them let me do what I want:
Â
1.) Manually cropping each scan individually does not give me the control that I need for cropping to precise pixel dimensions.
Â
2.) Creating a Crop Preset with the desired pixel dimensions doesn't work because using it results in scaling (I think.)
Â
3.) Using Canvas Size doesn't work because the borders in the scans are not equal on all four sides. I need to be able to move and position the image inside the crop area.
Â
4.) Using New, and Place… allows me to create a Canvas Size with the desired pixel dimensions and resolution, and move the placed images; they will fit without scaling. However, this results in a new file being created, and therefore the metadata is lost.
I know how to crop images but want to be able to view the resulting pixel measurements (ie, 1600 c 1200 pixels).
View 1 Replies View RelatedI need to move areas of an image that I have selected using the unit of points. For example, I get corrections in our copy where I need to move certain parts of the image 8 points up or over 3 points.
I can use the measurement tool to meausure the distance but then it disappears when I try to actually move the selection. The same thing happens when I try to use guides to mark the area. I wish I could just set Photoshop to "nudge" in points instead of pixels. Is there any way to make this easier? (Photoshop CS4 version 11)
I'm trying to learn Gimp so I can use the art I made with it in my games later on but as a formal Photoshop user I feel like that I have a hard learning curve.
I'm trying to move things on my layer without effecting the layer boundaries (just like the way move tool works in Photoshop).
I know that this is possible using selecting the part I want to move on my layer, then holding Ctrl+Alt and dragging with my mouse, then it creates a floating layer what I have to convert to layer in the layers panel.
I am trying to model a plane that will fit a specific pixel ratio (960x640, 800x480, 480x320, 240x240). So I know how to make a plane, that's not the problem, I just want to make the plane fit these aspect ratios without any stretching of the texture I will apply. So when I port this over to Unity I don't have any problems.
View 4 Replies View RelatedWe just bought new Macbook Pro laptops last Friday and also got Adobe Photoshop CC and Adobe Illustrator CC. Everything works pretty fine, except moving layer content eg. images or fonts around is a bit behind, slow/laggy, without any apparent reason.
Â
This happens despite external screen connected or not. It also happens with or without power adapter connected. We have brand new Mac OS Mavericks and 16GB RAM so performance should not be a problem.
Â
Some information (translated from Finnish system info):
Â
Model name:Â Â Â Â Â Â Â Â Â MacBook Pro
Model:Â Â Â Â Â Â Â Â Â MacBookPro11,1
Processor:Â Â Â Â Â Â Â Â Â Intel Core i5
Processor speed:Â Â Â Â Â Â Â Â Â 2,4 GHz
Processor amount:Â Â Â Â Â Â Â Â Â 1
Core amount:Â Â Â Â Â Â Â Â Â 2
L2-memory per core:Â Â Â Â Â Â Â Â Â 256 kt
L3-memory:Â Â Â Â Â Â Â Â Â 3 Mt
RAM:Â Â Â Â Â Â Â Â Â 16 GB
[code]....
Is this functionality available in PSE 11?
View 1 Replies View RelatedJust as it sounds, my client wants to be able to set the layers up in a drawing file so that all CC parts come in on a specific layer on the drawing.
I'm looking at the layers and the Object Defaults menus in Style Editor but not finding a way to accomplish this.
when I try to rearrange artboards most of the content doesn't move with it.How do I change the content to be associated with a specific artboard?
View 3 Replies View RelatedI have been using Corel for over 20 years, and have never needed support. Â I do most of my work editing nodes within a drawing for creating continuous line patterns that are repeatable. Â
For years I have simple "nudged" the first and last point of a complex curve to the appropriate position. Â Now I want to simplify that by entering in the coordinates for the node. Â
I have tried Object Coordinates, but it appears to do nothing after I change the node location, or radically change my design. Â There is no documentation for it. I have searched Customize for some sort of input field to add to the toolbar with no luck.
I always have to add the information on the coordinates of the selected note to the Status Bar, so I am surprised that I can't find an option for editing the position.
How can set that an object only moves per 1 pixel increments when moving using the arrows keys?I am designing a few web banners right now and when i move objects with the arrow keys to have them placed exactly, they jump with more then 60 pixels in one go making this exercise a bit useless.
View 3 Replies View RelatedI'm working on some plumbing in an assembly and in the past I've inserted all the fittings and pipe into a main assembly. Then created a sub-assembly and moved all those parts into that assembly. However I cannot drag and drop the pipe fittings around in the browser window. So I'm unable to move them to a sub-assembly.
I last remember moving content center parts between assemblies in Inventor 2012 and I'm currently running 2013.
I need to scale / tranform 30 - 40 circles from .5 to .25 that are in specifice locations, without moving the circles when scaled. AI CS6
View 9 Replies View RelatedIs there a way to move a solid part in an assy using grip snaps and a specific vector direction .
Please look at the attachment,here you will see a gusset positioned on top of a foot plate,the gusset needs to be moved so that it makes contact with the cylinder,it will then be welded. The problem is more difficult because the gusset is offset to the axis of the cylinder and the precise distance is unknown unless worked out using trigonometry.
The question is what is the best method of moving the gusset to the precise distance and direction ?
I've had a simple lisp I've been using for years that suddenly disappeared. It required that you identify a block name, tag name, and the value that you want the tag to be. All of this is performed via command line, so it is scriptable. Since I lost it, I've been experimenting with -attedit. This command comes frustratingly close to what I'm looking for, except it only appends an existing tag, or replaces a specific string within the tag; I can't get it to replace the entire tag, regardless of its value.
1> Any lisp routine that does what I describe?
or
2> How to make -attedit replace a tag value without regard to what the value currently is (like a * wildcard)?
I have subroutine that retrieves a list of detail numbers in a drawing. Sometimes there are missing numbers. I am looking to find a list of any missing numbers.
Example -
(setq List_DN (list 1 2 3 5 6 7 10 11 12 17))
Missing numbers are - 4,8,9,13,14,15,16
I would like a subroutine to take the List_DN are return the following missing numbers as text
(Get_Missing List_DN)
return
4,8-9,13-16
I am trying to link my parts list to a drawing however all balloons have different numbers.Â
I open the assembly and check everything out from vault I open my bom and change item numbers. When I get back to my drawing and apply for auto balloon I get completely different item numbers in my balloons. We just updated our software to a new 2012 version so it's maybe something with set up.Â
Is there a way to sync callout numbers to correspond with note numbers. When I add or delete notes in my drawings it takes to much time to update the callout number in the drawings. I need to figure out a way for the note and corresponding callout to change at the same time.
View 6 Replies View RelatedI hereby have a school note report from my little brother. He told me he had some bad notes in his last period and I would like to make a fake copy of it.
Basically, I scanned his 3th period notes and I would like to change some and add some
How you can remove numbers and add new ones over it and add numbers with the same digital code used on the old ones to put those in empty notes
When I crop a picture Pixel Demensions become 6 bytes Width and Height 1 pixel each. I can no longer see the picture. How can I fix this?
View 4 Replies View RelatedI have two art objects on two layers. I want to match to the pixel the two objects that otherwise could be exactly the same but one layered object was imported slightly smaller.
The scale tool has good scale handling, I just want to measure the tool spots to the pixel to gain an exact scale size factor and match sizes.
It blows my mind that somthing this simple isnt all that simple. I used the eyedropper tool to slect a color from another photo, then used the brush while fully magnified to change the color of each pixel.
It was coming out a weird greyish color, and I noticed that if I clicked more than once, it got darker, but so did the pixels directly around the one i was editing. So, i copied both pictures, loaded them into paint, and went to town.
It worked, but then when i copied it back into photoshop, it had a black background (there was no background in the original pictures) around the sprite I was editing. I tried to use the magic wand tool to get rid of it, but it took parts of the sprite with it, so...
Is there any way that I can edit the color of a single pixel (or hell, even a group of pixels if they share the same exact color would be nice...preferred, even) accurately? If not, what program could I use that would keep the transparent background?
I want to select part of an image with just one layer. Say I just flattened the image and have to move one part of. I select it with the rectangular select tool. It seems intuitive that I could then just move what I selected, but when I drag the selection, the selection itself moves without moving what is inside the selection.
If I then remember to click the move tool and try to move what's in the selection (seems to work sometimes, maybe when there's multiple layers?) the entire image moves.
The only way I can move part of the image over is if I make a selection and then cut it (ctrl X) then paste it.
How am I supposed to move part of the flattened image, is there a way I can set it to default to "When I select something, I can immediately drag that selected area around."
Via VBA macro, some way of getting RGB/CMYK color values of a bitmap pixel by pixel?
View 1 Replies View RelatedI managed to remove the background, of an image,(A whit background) and put the image on top of a transparent layer. made a transparent image. When I place this image over a light color background, it looks fine, but when I place it over a dark color background, the edge of the image looks very rough and dirty, I think it's because some of the anti alias from the original image, how can I make it a clean image without going to delete pixel by pixel?
View 2 Replies View Related We are developing an application using functionality of Gimp´s channel mixer with java.
Our problem is that we don’t Know how channel mix works exactly for transforming pixel by pixel in Java.
For example,
We have an image an do on it the next mix:
Output Channel = Red
Red=200.0
Green=0.0
Blue=0.0
For simulate that, we transform all pixels with Red Component *2 and 255 (maximum) if is greater.
Our problem is:
Output Channel = Red
Red=200.0
Green=60.0
Blue=0.0
How can I simulate that?
I'm using Photoshop CS5 and as you can see on the picture below, when I set my grid line to every 1 px, grid doesn't match canvas pixel size.
Now I'm not able to draw sharp shapes using pen tool because even if I hold shift key everything gets blurry.Â