Photoshop :: Selecting Pixel In Specific X / Y Position

Oct 23, 2013

I've got a series of meteorological satellite pictures (updated every 15 minutes), which indicate rainfall by means of a color code (blue means weak rain, red is heavy rain; the scale also includes green and yellow in-between). I wish to know the average daily rainfall on a specific spot in the map, which corresponds roughly to a single pixel in the picture, whose X,Y coordinates I've already determined.
 
Now, I could manually select this pixel in each of the pictures and see which color it was in that specific moment of the day; however, there are too many pictures (96 every day, to be precise), and I began wondering if there's any way to automate this process - that is, I would need Photoshop to select this specific pixel in each image, and determine which color it is.

View 2 Replies


ADVERTISEMENT

Photoshop :: Pixel Position

Sep 25, 2006

I am trying to make a new skin for a phone software,

sometime the button dont appears at the right place, when I try the program

I was looking at the ini files

FileName=sd.bmp
Left=124
Top=225
Width=36
Height=12
NumGlyphs=3

[Btn_Sd7]

FileName=sd.bmp
Left=124
Top=244
Width=36
Height=12
NumGlyphs=3

[Btn_Sd8]

FileName=sd.bmp
Left=124
Top=263
Width=36
Height=12
NumGlyphs=3

so I think those are the button position, so how do I know in photoshop
those button position?

View 4 Replies View Related

Photoshop :: Copy Then Paste With Specific Position?

May 23, 2006

I'm batching my signature onto a bunch of photos at the bottom righthand corner. I put my preferences to percentage rather than pixels so I could try things for most sized-photos. My dilemma now goes like this:

I record, open my signature, copy & paste to the other image (works fine). The signature shows up in the middle of the other image and rather than moving it manually where it'll be different for vertical and horizontal photos, is it possible to align right and bottom or get specific with entering numbers such as 90% horizontal and 90% vertical placement?

Basically, when you copy & paste to a different open file, is there a way to specify exactly where it should go when you paste it, or do you have to manually move it?

View 3 Replies View Related

Photoshop :: Cropping A Specific Pixel Size

Jan 12, 2005

Suppose I have a 300px x 300px image and I need to choose a part of that image to crop to 150px x 150px without resampling. (I need that hypothetical 150px x 150px so it fits a pre-defined area in a web page layout.)

I know I can take the crop tool to the image and view the "Info" tab to get my 150px x 150px. But that requires a fine touch and some trial and error to get the exact crop I want.

Is there a way to specify a particular size to crop or select and then move that selection around in the image to find the best crop? (Photoshop 7.0)

View 1 Replies View Related

Photoshop :: Selecting A Specific Color

Dec 25, 2006

how do I select a specific color on an image.

View 5 Replies View Related

Photoshop :: Spot Heal At Specific Pixel In Action?

Nov 14, 2013

I'd like to create an action that spot heals with a specific brush, with specific brush parameters and centered on a specific pixel - is this possible? I've got 16MP image files coming from a camera with a hot pixel, and I'd like to just run an action on import rather than heal it manually every time.

View 4 Replies View Related

Photoshop :: Moving Content By Specific Pixel Numbers

Sep 18, 2005

way to position content in photoshop as you would in say flash by plugging in specific pixel information? say i have a rectangular selection and I want to move it exactly 535 pixels to the right. or move all the layers content 75 pixels to the left.

View 2 Replies View Related

Photoshop :: How To Consistently Crop To Specific Pixel Dimensions Without Scaling

Aug 11, 2013

I have a set of drum scans of medium format film images. The pixel dimensions of the scans vary slightly. But they all consist of images of the same frame size, with borders around the image (scanned film outside the image.) All of the scans were done at 4000 pixels per inch, at 100 percent.
 
For example, the pixels dimensions of one scan is 10492 x 6907, another is 10390 x 6968, and another is 10483 x 6976.
 
I want to crop all of them to 10200 x 6738 pixels. I want to delete the cropped pixels, and I do not want any scaling to take place. I want to preserve the original metadata (the scanner model, pixels per inch, etc.); in other words, I want to modify the files (or copies of the files), not create new files. The print size does not matter.I've tried several approaches, and none of them let me do what I want:
 
1.) Manually cropping each scan individually does not give me the control that I need for cropping to precise pixel dimensions.
 
2.) Creating a Crop Preset with the desired pixel dimensions doesn't work because using it results in scaling (I think.)
 
3.) Using Canvas Size doesn't work because the borders in the scans are not equal on all four sides. I need to be able to move and position the image inside the crop area.
 
4.) Using New, and Place… allows me to create a Canvas Size with the desired pixel dimensions and resolution, and move the placed images; they will fit without scaling. However, this results in a new file being created, and therefore the metadata is lost.

View 3 Replies View Related

Photoshop Elements :: Crop JPG File To Specific Pixel Size?

Apr 30, 2013

I know how to crop images but want to be able to view the resulting pixel measurements (ie, 1600 c 1200 pixels).

View 1 Replies View Related

Paint.NET :: Multiple Crops For GIF - Getting Accurate Pixel Position?

Jan 22, 2013

Is there an easy way to crop a dozen pictures so the image is in the same place? I kept the camera as still as possible but there's inevitably a bit of jumping about.  I've tried calculating x and y distances from a fixed point but it doesn't ever seem to work. And can you control the cursor position from the keyboard? It's soooo difficult to get accurate pixel position using a mouse.

View 1 Replies View Related

3ds Max Modeling :: How To Set Vertex To A Specific Position In Space

Mar 20, 2011

In sub object mode, I have some vertex selected, I would like to set this vertex to a specific position in space.

For exemple, In the picture attached, I want that each 4 vertex set to 0 in x position in one command (I don't want set to 0 individually each vertex).

View 2 Replies View Related

GIMP :: Move Image To Specific X / Y Position

Dec 13, 2013

I'm creating a sprite sheet and I need to move my sprites to a specific location.

For example my sprite is 120x120, so I need to place the 5th animated frame at EXACTLY 120x5=600 pixels from zero or at 600, 0. I can't seem to find a way of doing this in GIMP, it shows me a mouse delta position from where I first clicked?

View 2 Replies View Related

GIMP :: Crop To Specific Position In Images

Jun 21, 2012

I have a question with batch crop. I have about 300 images of same dimension and would like crop to specific position in all of them. In photoshop, I would import all the images as a layer and crop a layer, then export the layer as an individual file.

View 1 Replies View Related

3ds Max Modeling :: Model Plane With Specific Pixel Aspect Ratio?

May 13, 2011

I am trying to model a plane that will fit a specific pixel ratio (960x640, 800x480, 480x320, 240x240). So I know how to make a plane, that's not the problem, I just want to make the plane fit these aspect ratios without any stretching of the texture I will apply. So when I port this over to Unity I don't have any problems.

View 4 Replies View Related

3ds Max Animation :: Assign Specific Vertices To A Bone By Selecting Separate Part Of Object

Nov 24, 2013

Is there a way to assign just specific vertices to a bone by selecting a separate part of an object? Like for example, I have a model of a gun which I'm trying to rig now and this gun has two barrels, one obove the other, and each of this barrel needs to be assign to a different bone. Those bones are there, but the problem is that certain parts (vertices) of second barrel are assigned as well to the second bone, which is incorrect. How do I select only part (an element) of an object and assign it to the bone?

View 5 Replies View Related

GIMP :: Position Picture In Specific Location Within Background Picture?

Jan 7, 2013

or how to position a picture in a specific location within a background picture.

View 3 Replies View Related

AutoCAD Visual LISP / AutoLISP :: Change A Specific Attribute From Specific Block To Specific Value

Dec 7, 2011

I've had a simple lisp I've been using for years that suddenly disappeared.  It required that you identify a block name, tag name, and the value that you want the tag to be.  All of this is performed via command line, so it is scriptable.  Since I lost it, I've been experimenting with -attedit.  This command comes frustratingly close to what I'm looking for, except it only appends an existing tag, or replaces a specific string within the tag; I can't get it to replace the entire tag, regardless of its value.

1> Any lisp routine that does what I describe?
or
2> How to make -attedit replace a tag value without regard to what the value currently is (like a * wildcard)?

View 9 Replies View Related

Photoshop Elements :: Crop Picture Pixel Dimensions Become 6 Bytes Width And Height 1 Pixel Each

Apr 11, 2013

When I crop a picture Pixel Demensions become 6 bytes Width and Height 1 pixel each. I can no longer see the picture.  How can I fix this?

View 4 Replies View Related

Photoshop :: Scaling Two Objects To Match Exactly Pixel To Pixel

Apr 22, 2013

I have two art objects on two layers. I want to match to the pixel the two objects that otherwise could be exactly the same but one layered object was imported slightly smaller.

The scale tool has good scale handling, I just want to measure the tool spots to the pixel to gain an exact scale size factor and match sizes.

View 2 Replies View Related

Photoshop :: Changing Somthing's Color Pixel By Pixel

May 12, 2007

It blows my mind that somthing this simple isnt all that simple. I used the eyedropper tool to slect a color from another photo, then used the brush while fully magnified to change the color of each pixel.

It was coming out a weird greyish color, and I noticed that if I clicked more than once, it got darker, but so did the pixels directly around the one i was editing. So, i copied both pictures, loaded them into paint, and went to town.

It worked, but then when i copied it back into photoshop, it had a black background (there was no background in the original pictures) around the sprite I was editing. I tried to use the magic wand tool to get rid of it, but it took parts of the sprite with it, so...

Is there any way that I can edit the color of a single pixel (or hell, even a group of pixels if they share the same exact color would be nice...preferred, even) accurately? If not, what program could I use that would keep the transparent background?

View 1 Replies View Related

AutoCAD 2010 :: Force Attribute Position To Remain Fixed In Drawing When Moving Block Position

Jul 12, 2013

Is it possible to setup a block so that an attribute position remaines fixed (absolute to drawing) when moving the block?

I've been playing around with creating a Coordinate Block by following these instructions: [URL] ........

What I would like is to be able to set the position of the Coordinate Label and Coordinate Object independently, so that if I move one in the drawing, it doesn't move the other.  I've looked into Dynamic Blocks, and the "Lock Position" parameter. I can move the attribute independently, but still everytime I move the block, the attribute moves too.

Our company uses a custom Sheet/Coordinate system to follow flyoffs across a drawing, and I'm trying to learn how to automate the process.  It's completely manually right now, so any changes to a drawing creates a lot of work renumbering these flyoffs.

View 4 Replies View Related

CorelDRAW Graphics Suite X5 :: Getting RGB / CMYK Color Values Of A Bitmap Pixel By Pixel?

Feb 19, 2012

Via VBA macro, some way of getting RGB/CMYK color values of a bitmap pixel by pixel?

View 1 Replies View Related

GIMP :: How To Make Clean Image Without Deleting Pixel By Pixel

Mar 13, 2011

I managed to remove the background, of an image,(A whit background) and put the image on top of a transparent layer. made a transparent image. When I place this image over a light color background, it looks fine, but when I place it over a dark color background, the edge of the image looks very rough and dirty, I think it's because some of the anti alias from the original image, how can I make it a clean image without going to delete pixel by pixel?

View 2 Replies View Related

GIMP :: How Channel Mix Works Exactly For Transforming Pixel By Pixel In Java

Jul 26, 2012

We are developing an application using functionality of Gimp´s channel mixer with java.

Our problem is that we don’t Know how channel mix works exactly for transforming pixel by pixel in Java.

For example,

We have an image an do on it the next mix:

Output Channel = Red
Red=200.0
Green=0.0
Blue=0.0

For simulate that, we transform all pixels with Red Component *2 and 255 (maximum) if is greater.

Our problem is:

Output Channel = Red
Red=200.0
Green=60.0
Blue=0.0

How can I simulate that?

View 1 Replies View Related

Photoshop :: Canvas Pixel Size Doesn't Match Grid Pixel Size

Dec 6, 2012

I'm using Photoshop CS5 and as you can see on the picture below, when I set my grid line to every 1 px, grid doesn't match canvas pixel size.

Now I'm not able to draw sharp shapes using pen tool because even if I hold shift key everything gets blurry. 

View 5 Replies View Related

GIMP :: Make Hotkey Or At All Save Specific Options For Specific Tools?

Sep 26, 2012

What I want to know is if there is a way to make a hotkey or at all save specific options for specific tools. Let's say I'm using the 'Paintbrush, Opacity 70%, Hardness 075, Size 4.00' as my "standard outline tool". Can I some how save that preference (and any other tool such as "Specific Eraser Op. 100%, Hard. 100, Size 10.00) so that I can easily switch between "Ouline Brush" and "Specific Eraser" . Maybe to the 'f-buttons'

I'd like to be able to make maybe 5 specific tools:-Outline Brush

-Small Eraser
-Big Eraser
-Detailed Color brush
-Big Color Brush.

View 4 Replies View Related

AutoCad :: Make Specific Command To Start At Specific Layers

Nov 27, 2013

Im using Autocad Structural Detailing 2013. Its is possible to make specific command to start at specific layers?

EX: Breakline ,by default start at "LAYER 88".
Polyline ,by default start at "LAYER 150".

View 2 Replies View Related

AutoCad :: Delay In Selecting Object And Selecting Command?

Sep 25, 2008

I am having a problem with a delay in selecting an object and selecting a command.

When I select an object the pointer has at least a 3 second delay before it starts moving around normally again. It is the same with selecting a command. This has started to get tedious. It has worked fine in the past so I don't think it is a RAM/graphics card problem.

View 5 Replies View Related

AutoCAD Inventor :: Mouse Selecting / Not Selecting?

May 15, 2012

OK, today, or actually just this afternoon I've noticed it has become much harder to select items with the mouse.

Points, nodes, etc...anything where you'd typically hover the mouse over the item and it highlights for you to select it.

For example, lets say you want to project a point from another sketch, or select the center node of a line, etc.

Never really had an issue until this afternoon where now it seems I have to be right on top of the item and I cannot budge one bit or it won't select it. It is now taking me numerous attempts to select things like points (zooming in does not work, points scale accordingly).

Is there a setting somewhere? I can't seem to find such under Tools>Application Options and the like.

View 8 Replies View Related

AutoCad :: Position Of Attributes On Block Match Position On Another Block

May 15, 2013

Is there an easy way to ensure that the position of attributes on a block match the position on another block?

I just used the ATTIN command to upload a bunch of data to the block attributes on a drawing, and now the information is all over the place.

Instead of going through each one manually and repositioning the attributes (a VERY lengthy process), I want to use a "correct" version as a template of sorts to inform the other selected blocks of where to place the attributes and have it reposition the whole thing automatically.

Is this even possible?

View 6 Replies View Related

Photoshop :: Why Do Paths Snap To Pixel Grid Although (snap Vector Tools To Pixel Grid) Is Off

Aug 8, 2012

When I drag around vector points of paths they are not constrained to the pixel grid, when the option "Snap Vector Tools and Transform to Pixel Grid" is off. This is the behavior I expect.BUT: When I drag whole paths, they snap to the pixel grid, no matter what. I even have snapping completely disabled.
 
This is particularly annoying when eg. creating a path for a zipper. I first make a path for the inside of the jacket or whatever, then I make one notch for the zipper and copy it over and over again for all the notches. It's very troubling when these elements snap to the pixel grid, because it's very unprecise then.

View 1 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved