Photoshop :: Making Triangles And Other Shapes
Jun 7, 2006i know a few things about photoshop however can't find a way to make triangles. i need to make some edges round, some pointy.
View 4 Replies
ADVERTISEMENT
Photoshop :: Making Custom Shapes
Aug 6, 2006I was wondering how to create custom shapes with CS2. At the moment i'm dirtily drawing straight line angles freehand and they look terrible.
How would i, for example, cut the corners a square. Id use the rectangular marquee tool rotated 45 degrees and then cut off the corners like that. But it's not accurate at all and there's no shading to make the line look smooth.
Photoshop :: Making Shapes Smoother With The Pen Tool
Nov 13, 2003Any tips on making your shapes come out smooter (as in their edges) when creating them with the pen tool?
View 10 Replies View RelatedAutoCAD 2010 :: Making Duplicate Shapes On Drawing
Sep 19, 2012I wanted to know if their was an easier way to make duplicate shapes on a drawing. I am doing a survey plat and need to make at least 66 circles with a 2.5 radius on each corner of the lot. Using copy on autocad does not work since it will place the circles off center.
View 7 Replies View RelatedAutoCAD Inventor :: Making Line Configurations Closed Shapes For Extrusion?
Mar 7, 2011I just completed a sketch for a simple part I'm working on. It contains some arcs, lines, and rectangles that I've drawn. When I went to extrude them to make the sketch 3D, not all of the shapes I created could be extruded, presumably because in my sketch the lines/arcs did not come together properly to create a closed shape.
View 9 Replies View RelatedAutoCAD Inventor :: Making Hopper To Dispense Sand - Sheet Metal Lofts / Shapes
Aug 8, 2013I am making a hopper to dispense sand, but I can't figure out the process to make the shape I want. I thought it would be easy! This is pretty much the first sheet metal part I've tried to make apart from easy tutorial things. I'm OK at normal parts.
I've mocked up the rough shape I want from a normal extruded part (attached). I've also attached the start of a folded version. I've had lots of attempts and none of them have really got anywhere.
How can I make this??
Photoshop :: Just Got CS4 And I See Triangles
Aug 13, 2009Just got Photoshop CS4 and I get triangles on top of my art board and I need them gone because its blocking whatever I work on because I cant see it as a whole.
View 4 Replies View RelatedPhotoshop Elements :: Using / Converting Illustrator Shapes Into Custom Shapes
Sep 23, 2012I would like to use a vector object made in AI as a custom shape to be used as a cookie cutter in elements.. I imported the AI file in photoshop but the "define custom shape" entry under "edit" was grayed out.
View 2 Replies View RelatedPhotoshop :: Multiple Triangles On...
Apr 9, 2009Photoshop CS4. Recently I've purchased a new laptop and downloaded the trial version of Photoshop CS4.My computer is a Packard Bell with: AMD Turion64x2 2.10 Ghz 3Gb RAMATI Radeon HD 2400 (driver: 8.381.0.0) When I load any picture it doesn't look ok. They always seems like if I've used a filter or a grid, but i haven't. pictures have multiple triangles going through it or some strange black lines if I zoom it.
View 2 Replies View RelatedPhotoshop :: How To Save Shapes That Have Drawn To Custom Shapes
Sep 26, 2013Using Lasso i have created a good shape that i require in my work. so now i want to save that shape i have drawn to custom shapes so that i can use it later also in my future works.
View 4 Replies View RelatedPhotoshop :: Graphics Opening. Odd Triangles
Feb 8, 2009I recently got the new Photoshop CS4 better than Paint Shop Pro. However everytime I open a graphic (.JPG, .PNG etc) I get these wierd triangles across the graphic...
View 5 Replies View RelatedPhotoshop :: PS CS4 - Displays Images In Triangles
May 27, 2009I just downloaded and installed PS CS4 Extended, and set to use the Trial. Okay so my problem is that whenever i open a new document and start to color in it, it displays in some triangles or well spikes. You can see a Screenshot i took. So, I tried resetting the settings, but still came up with this problem.The graphic card that im using, is Ati Radeon HD 2600 - with fully updated drivers.
View 6 Replies View RelatedPhotoshop :: Stars And Triangles And Site Design
May 28, 2003how they drew they lay out for this site and where can i get some of the side way trinagles in the navigation and stars. ANy brushes any ideas?
View 7 Replies View Related3ds Max :: FBX Export Is Converted To Triangles
Oct 18, 2011I'm modelling in 3ds Max 2012 with quad polys but when I export it shows a message and then exports the mesh in triangles.
View 1 Replies View RelatedVideoStudio :: Function Of Green Triangles
Nov 16, 2011I noticed that you can click on the top of the time line to put green triangles at various places at the top of the story board. I am not sure what they are for other than to mark a place on the timeline. I also noticed that when I burned the video to disk, there was a skip or brief pause at the exact location where the green marker was located. So I have two questions:
1 Was the "skip" at the marker purely coincidental or was it caused by the marker and
2 What are the markers for?
Mudbox :: Can It Work With Models That Have Triangles
Jan 10, 2012can mudbox work with models that have triangles.
View 1 Replies View Related3ds Max Modeling :: How To Get Rid Of Triangles Within Faces In Model
Jan 13, 2012I am fairly new to 3ds Max and I would like to know if there is a way to fix my model to get rid of the triangles within the faces. And how I may prevent these errors in the future.
View 2 Replies View RelatedCorelDRAW X6 :: Creating Shapes Through Inverting Other Shapes
Nov 18, 2013I drew something up on a sheet of paper, scanned it, then traced it's bitmap as line art. I then proceded to edit the vectors to recover all the detail I lost with the tracing. It took forever!
Now that I´m done, I realised there is a problem... how can I color in the drawing, if the lines themselves make up the shape? Essentially, I´m left with blank spaces in between all the lines instead of solid individual shapes that can be colored in.
What can I do? I´m so desperate I´m thinking of creating a gazillion individual shapes with the colors, and slapping them underneath the lines to "improv" a fill. But that will take waay too long, so is there an easier way?
If I could "invert" the shape I have now, so that the blank spaces become individual shapes, and the lines become blank spaces.
AutoCAD Civil 3D :: Triangles Not Seeing Break Lines
Apr 17, 2012Putting in a simple berm crest, and the triangles skip right over a certain section. Swap edge does nothing and adding points seems to make things worse. I have been able to fix this problem before, but only by deleting my surface and then putting all the pieces back in at once. Then it's perfect.Â
I think part of the problem may be that the "Contour help" I put in at the blue major contours is screwing things up.I have had the same issue when putting in down-slope channels as well.
AutoCAD Civil 3D :: TIN Triangles Showing Up On PDF - 2012 SP2.1
Aug 15, 2012Whenever I try to use the "DWG to PDF.pc3" driver, I'm getting TIN triangles in my PDF. They don't show up in the "Print Preview", just in the resulting PDF. They also don't show up if I print directly to a printer. Only in the PDF. Never saw this before installing SP2.1.
View 9 Replies View RelatedAutoCAD Civil 3D :: Reading Triangles From File
Nov 14, 2011I am running 2011 c3d on windows 7 with 15 GB of ram.
An error message I get is "reading triangles from file" and the program locks up to where you need to do a reset on the computer. I have an existing ground surface that is data shortcut into the file I am opening when I get this error. The existing ground surface is about 5 mg in size. I'm not sure if this is causing the error.Â
Illustrator :: How To Align Triangles Exactly So There Is No White Space
Jul 18, 2012I'm creating some geometric images in Illustrator for an animation in After Effects. I have four triangles that are all aligned to make a square. However, there are small white spaces between each of the triangles, so when viewed at actual size, there's a white X through the centre of the square.
Â
How can I align the triangles exactly so there is no white space in between?
Lightroom :: Missing Histogram Clipping Triangles
Jan 1, 2014The histogram clipping triangles disappeared in the Develop module. Upgrading from LR 5.2 to 5.3 did not solve the problem, and I can't find an on/off toggle in any of the support sites.
View 1 Replies View RelatedCorelDRAW X6 :: How To Symmetrically Set Up Angles / Triangles On Business Card
Sep 12, 2013Question: How do I join triangles and squares so that they are symmetrical?
I have a customer for whom I am designing a business card. I am having to reset the business card from a scanned image.
The business card has got angles and triangles on it. Some of the angles have fills. Others do not.
I can use the Shape tool and trace the scanned image of my customer's business card. However, some of the angles are mirrored on either end of the business card. If I trace the scanned image it would be hard to get the angles right.Â
Basically, how, to work with triangles? I need to join triangles together at angles and so forth so that the business card looks symmetrical.
Paint Shop Pro :: Script To Draw Triangles Within Triangle?
Jan 13, 2013I'd like to draw a 10-inch equilateral triangle, and then fill it with 0.5-inch triangles.
View 14 Replies View RelatedAutoCAD Civil 3D :: Surface Drawing Triangles Across Breakline
Jan 6, 2014i am trying to add as a breakline. i have not been able to get this particular line to work as a breakline and the surface keeps drawing triangles through the line like its not even there. The figure properties show that it is a breakline. The figure prefix database brings the line style in as a breakline from the start.
View 5 Replies View RelatedAutoCad 3D :: Drawing Of Jug - Tessellation Lines Showing As Triangles
Jun 23, 2011I have created a drawing of a jug from a CAD learning manual, however when I enter HIDE mode the tessellation lines show as triangles, not rectangles as shown on the image in my book.
It appears fine before HIDE (horizontal and vertical lines only) -- I've tried FACETRES but that just creates a higher amount of triangles during hide.
Is there a way to adjust how it's shown in HIDE mode?
I have attached 2 images (or tried to!):
1 - Before HIDE.
2 - After HIDE.
I need 2 to look like 1 on the surface.
J1.jpgJ2.jpg
CorelDRAW Graphics Suite X5 :: Creating Triangles And Then Aligning Edges
Jun 25, 2012I want to create a page similar to this graphic;
The problem I am having is creating the Triangles and then aligning their edges.
I've tried changing the rotation node and then duplicating and rotating. But I can't get a tight edge to edge.
I can't figure out how to align the right edge to a left edge and so on.
AutoCAD Civil 3D :: On / Off Display Toggle For Surface Points And Triangles?
Dec 5, 2013Since Action recorder does not work with the surface style display box, is there any way
to automate the toggle of points and triangles display ?
I dont see any command lines that can change the light bulb status?
using c3d 2012
3ds Max Modeling :: How To Remesh Existing Mesh With Equally-spaced Triangles
Nov 10, 2012I have an existing mesh based on quads.(Similar to how 'garment maker' generates a flat mesh, but wrapped around my existing mesh while keeping (close to) the same shape.
Is there a way to do that? Most remeshers will generate quads but I really need equally-spaced triangles to reform the mesh.
AutoCAD Civil 3D :: Surface Triangles Not Appearing In Object Viewer
Mar 7, 2013Today I opened a file that has previously worked perfectly well, only to find that when I open my surface in Object Viewer and begin to rotate it manually, the triangles making up the surface do not appear. I have the contour lines and border (what is enabled in the Edit Surface Style/Display/Model tab) although the triangles (which should be displayed as well) do not appear. Other surfaces show like they should.
Is there another option other than the Edit Surface Style/Display/Model tab and the VISUALSTYLES command?
using Civil 3D 2013.