I have an existing mesh based on quads.(Similar to how 'garment maker' generates a flat mesh, but wrapped around my existing mesh while keeping (close to) the same shape.
Is there a way to do that? Most remeshers will generate quads but I really need equally-spaced triangles to reform the mesh.
I am fairly new to 3ds Max and I would like to know if there is a way to fix my model to get rid of the triangles within the faces. And how I may prevent these errors in the future.
View 2 Replies View RelatedIs there an easy ways to clean up a mesh so that its easy to skin ? i am working with the mvu default mesh. someone told i have to remake my own body then redo the uvw map to match. Unfortunately i don't have the skills to do that currently.
My end goal is to increase the poly count so that my clothing look smooth and still be able to skin it easily. Mesh smooth just causes more problems.
My ribbon does not have Mesh Modeling Tab. Where can I find the tab?
View 3 Replies View RelatedI have recieved an dwg file with the hight infomations of a valley. My task is to convert these splinelines into a mesh so we have a model that can be populated with trees. Is there an easier way beside pulling it out by hand?
View 2 Replies View RelatedI'm missing a shrink tool or modifier which can shrink a mesh. I don't want to scale it down because it's preserving the proportions but that is not what I propose to do.
The Shell modifier for example extrudes the polygons along their local normals. This in reverse I'm trying to do.
Think about a banana and you will get a copy of it in a smaller and thinner way because you have modelled the shell of the banana but not the flesh in it. I think that explains the difference between shrinking and scaling.
I would like to move two different vertex, from different mesh, at the same place. I thought maybe I could put a guide or a landmark to the position I want the vertexes to be. I can't find anything about guides in 3ds max
View 2 Replies View RelatedI am having a trouble when a try to bend a "Editable Mesh" element. I need to bend the "Peca1" and it need to looks like the "Peca2" (booth in attachment or in skydrive [URL]......
View 5 Replies View RelatedI have a mesh which is derived from a heightmap. It represents the water surface on the terrain. I need to tile the mesh so that I can apply each piece to a separate terrain tile in the Unity game engine.I'm working in meters so I guess just importing the mesh and converting to meters on input would set up the mesh extents correctly. The mesh will be square covering the entire world extents.How do I set up a grid and slice the mesh precisely along that grid? Are there any methods in Max, or any scripts? It would also useful if I could scale the mesh in the Y (height) axis to change the span. How to do that?In addition, I need to delete parts of the mesh. The triangles will always be along the same plane- for eg, any triangle on the plane in the pic. Is that possible? I don't mind editing manually, but I'm wondering if there's a more quick way to do it.
View 2 Replies View RelatedTell me the approach to model a spherical microphone mesh?
-->Here is an example<--
Application: 3Ds Max 2010
GPU: ATI HD6970
RAM: 8GB
OS: Windows 7 64-bit
DX: 11
My website: [URL].....
Turbosquid Page: [URL].......
Is it possible to subdivide a mesh by using a grey scale image?
Work Computer - Max 2012, Core i7 3.6, 6GB RAM, ATI FireGL V7700 512MB, Windows 7 64bit
Home Computer -BBC Electron with tape player and a copy of creepy cave
I have these diagonals showing on my mesh-objects - How to get rid of them?
View 3 Replies View Relatedis there a max plugin that identifies errors on a mesh? I have a .obj file I imported. I know it has some problems like holes or doubles shared edges and unwelded vertics. I am just looking for a program or max plugin that can point out those errors?
View 1 Replies View RelatedI work in Max 2012 on a mesh who explode at some point when my stack is heavy, it can occur while I'm working on it or if I open the max scene. I had that problem in old version like 4.2 or 5 but apparently it's back.
View 2 Replies View Relatedfrom what I understand, mesh cleanup fixes problems with bad geometry. but is there a function by which I can delete all edgeloops in a mesh that don't contribute to the shape? so Maya turns the mesh into as low rez as possible while retaining the shape....
View 2 Replies View RelatedI'm attaching part of my mesh with another using the Boolean Tool. When I do this part of the mesh I'm using disappears when it shouldn't. How do I fix this?
Before Boolean (showing the two parts)
After Boolean (look at the railcars far left side its gone)
I was modeling a unicorn in ZBrush (because it's so comfortable and intuitive with modeling) for a film in a project of my studies and imported it to 3ds Max then, because I know how to rig and animate there (and in ZBrush I didn't even find out how to MOVE an object).
After a while I finally killed all the triangles in my mesh, but it's just... horrible. So many polys where they aren't needed, so unclean. It looks like this:
[URL]..........
And I'd rather want it to be clean like that:
[URL].......
I've been working on an editable poly model and I noticed that when I convert it to a editable mesh the number of polys doubles.
View 3 Replies View RelatedI have a 3d scan, its a dense mesh with a messy texture map.
I want to retopologize it by hand. Is there a way of automatically re projecting the old texture map back onto it from the 3d scan?
I bought a 3d mesh model of a chair I want to make out of wood. To do this I want to use Maya to create 2D slices of the mesh model that I can use as templates for my woodwork.
The model looks great in Maya, but how to create these slices or 2D views and print them.
Is there any way for editing more then one meshes at a time? For example: I want to extrude, bevel, connect components of my two cubes at the same time.
View 2 Replies View RelatedIs there a non-destructive way to import a mesh and then work on it symmetrically in Max? I'm not having a ton of luck looking on the net (though it may well be my search criteria). I need to work on a symmetrical mesh that I've imported but the symmetry tools all seem to create geometry or require I cut mine in half. I'm missing something, right?
View 4 Replies View RelatedWhen I go to edit mesh on a brand new hedra and take two points and scale them, the sides are uneven, one side isn't scaling properly. It looks to be the one with the square edge. Here's a video.
[URL].........
I am trying to fix holes on my mesh by selecting the whole mesh and hitting weld at .001, but its pulling the whole mesh in. I have tried increasing the scale of the mesh by 1000x and even 5000x but a weld of .001 is causing the exact same result. I thought increasing the mesh size was supposed to scale the weld distance as well but its not for some reason.
View 2 Replies View Relatedhow can i reduce the poly count of a static mesh I made. I am attaching a screen shot of it. Rather than re-modelling the mesh or re-topologizing what can i do to reduce the poly count??
View 2 Replies View RelatedI connected two pieces using merge vertex tool. And now i have difference in mesh (material). Line in center of model. How to remove it?
View 2 Replies View RelatedI've just extruded a face. I realize I need make a slight adjustment. I don't want to undo the extrudtion nor do I want do an Edit Mesh to create a new extrusion.Is there an easy way to readjust an extrudtion?
View 1 Replies View RelatedI need merge many objects in one for export to fbx. If I delete any of polySurface objects, mesh lowpolyHouse crushes. If I stay it, than it all export to fbx file, problem is that I need mesh object only.
View 1 Replies View RelatedI am using maya 2011. I have a simple roof, which i extracted faces from the small house (see pic1). However, when i smooth the roof, all the extracted faces went smooth individually (see pic2). How can i combine all those individual faces i extruded, to make into a single mesh or polygon, so that when i press 3, it will smooth like as in pic3 rather than individually.
View 3 Replies View RelatedI do sometimes buy some objects at Turbosquid that I download as .obj files.
They are represented as a single mesh object in Maya, however when I look the material of this mesh, I see different tabs representing the different sections of the mesh with the different materials (e.g. a duck would be seen as 1 mesh, but 1 material for the body, 1 for the left eye and 1 for the right eye).
How to split up this mesh in different meshes by material ?
I'm using Maya 2013 and I can't find "Edit Mesh" at the top of the window. I've found this page (
[URL]......
but it refers to Maya 2012. The second problem is:
I'm trying to put an image on the cylinder-surface. I've found a youtube-video (added bellow) which says I have to click on "Cylindrical Mapping" after making a "blinn2" (and so on).
But when I click on "Cylindrical Mapping" nothing happens. There isn't even an error message.
