This is hopefully something simple that I am just missing, but am panicking! I can toggle the tools bar on and off, but all that appears is the little slice of blue with the feather on - no tools, and no obvious way to get them back! I'm slightly freaking out as have a mammoth design project on, and whilst I have re-downloaded a trial version its only got a few days left on it and i'll never finish in that time!
View 1 RepliesIs there any way to get the broken symbol in a broken dimension like shown below?
View 9 Replies View RelatedI've tried to figure out the pattern of how the command works for inputting partial customization menu toolbar names but I'm unsuccessful.
You should be able to show and hide partial customization menu toolbars with the -toolbar command because it can hide all toolbars including my partial customization menu toolbars currently shown. I've tried the toolbar menu alias (defined in the CUI command) and the name (refer to this link to the same image embedded below) and none work.
I shoot strictly in raw (nef from a D80). All of a sudden a few days ago CS decided it did not want to open raw files any more, tiffs and jpgs still work fine. The first thing I tried was to download the latest raw plugin for CS and install it, still resulting in the same problem. I then proceeded to uninstall and reinstall CS in a few different ways, but to no avail. I also tried opening a raw file from my backup drive with the same results. The specific error message is "could not complete your request because of a disk error," which doesn't mean much to me but I am getting the idea that it is a problem with my machine and not the CS software itself.
View 10 Replies View RelatedSince switching to CS6 when I create an image resize action in Photoshop the action runs correctly but if I create a droplet then the action makes the image width and height deminsions the same matching neither from the action.
It makes a 2550 x 1880 image, that I'm trying to convert to 612 x 432 into a 512 x 512 image. It also seems to be having an issue with eps files, because when I open the same eps again and run the action it adds a '-1' then '-2' then '-3' and so on, to the end of the name.
I've tried it on three Macs works the same on each one. I'm try to convert .eps files created in illustrator to .gifs for web preview. I can make an action in Illustrator, but there's no droplet. And if I save the files in .ai then the action for the droplet won't make it past opening the files. Even though suppress action open prompts are turned off.
I created a set of actions a few weeks ago and have been using them regularly. Today all of my actions with curves are no longer working (giving the same effect).
Instead of having the settings I put up on the curves layer, an empty curves layer comes up instead. Is there a way to fix this?
i have broken text is what someone told me, and its causing photoshop not to open.
but i have over 3000 fonts in my windows fonts folder
how can i find and take out the broken text more effetively?
I was downloading pictures from someone's memory chip and when I wanted to use the pics, I got an error of "broken picture" and can't proceed any further....
View 1 Replies View Relatedwhy my logo image at the following link has such broken border:
This is saved as a standard PNG image with transparency...
How do I deactive photoshop CS5 on a computer that is no longer working so that I can free up my license to use on a new computer?
View 6 Replies View RelatedIs Color Range broken in CS6? …. it's not working…. OR it's not working like it has before in CS5...
View 13 Replies View RelatedThis is how my Photoshop CS6 (64-bit) looks
This is my 'Preferences' window, as you see the text is missing and it just generally looks weird as crap. That's the same with all the windows etc.
Then I added my old fonts because I was setting up this new PC (1k+ fonts) and then I got this problem. already tried re-installing Photoshop several times, deleting configs and restarting my computer but nothing seems to work and the problem persists...
why Photoshop changes grayscale values when pasted from the clipboard.
For example, I have a 24-bit bitmap on the clipboard that has every value set to (128,128,128). When I paste it into Photoshop the RGB values become (149,149,149) and (150,150,150), and not (128,128,128) like they should be.
My brushes have broken in some way.
when im going to use one and clicks it gets alot smaller then the actual size of the tip.
heres a picture of it: .......
I am doing some photo retouching and have the original photo on the background layer. Now I have never been able to get my clone stamp to work when I add a "new layer" and try working on that layer. It will work on the original background image, where there are definitely pixels. But the new layer sitting on top of the background layer is transparent, and my clone stamp won't do anything
But I want to be able to retouch on the new layer without affecting the original background layer. So I'm watching this Quicktime movie by J. Kost on Advanced Photoshop Portrait Retouching (I bought the entire set from her at Fotofusion) and I am watching her do this!!! But I can't! She is retouching a portrait with the clone stamp....the transparent layer 1 is active above the background layer (ie it's highlighted) and the paintbrush well is indicating that the transparent layer 1 is what is being worked on.
I checked my opacity for this layer...it's 100%. I am working in 8bit RGB mode. PS 6.01. Blending mode is normal....
Do any photoshop gurus have any idea about what I am doing wrong? As a beginner (I have only seriously been studying photoshop for about 2 years...and I know it takes a long time), this problem has been confusing me...and not just with the clone stamp but also with the other brushes, and thus knowing when I can work on a seemingly transparent layer versus one with pixels.
I am running Photoshop CS4 and whenver I try to make an adjustment layer only affect the layer below it by creatnig a clipping mask, it just disables the Adjustment layer. What I mean by this is that its just as if I hid the adjustment layer, so it doesn't affect anything. I've tried everything in the Solutions to Common Problems thread.
View 7 Replies View Relatedhow this guy did that glass effect.
View 9 Replies View RelatedI'm trying to create a shattered/broken mirror for a print I am currently making. Its either going to be just a few broken pieces of glass, or what I am really trying to make is a mirror after it has fell to the ground and is beginning to shatter.
View 3 Replies View Relatedto make broken or shattered glass?
View 3 Replies View RelatedI have a Wacom Intuos3 A5 Wide, but PS CS4 doesn't recognize nor use it and instead shows a warning next to the pressure sensitive features saying:
"Requires a pressure sensitive tablet."
I'm running Vista x64 Business and PS CS4 x64. Pressure sensitivity works in PS CS3 and PS CS2.
I'm really saddened to say that I find PS CS4 the slowest and most troublesome release yet. I start to regret ordering an upgrade from my beloved CS2 (which had a broken Vista support).
I have been looking through my PS & for the life of me I cannot find
anything remotely close to the jpeg attached, either I am overlooking
something or it's just not there.
how to accomplish this style of border which is found on a large number of
sales pages encasing perhaps a product as an example.
I've managed to break my line tool or something, when i want to use it, it draws a weird arrow and i can't change it.
View 4 Replies View RelatedI just upgraded from Lightroom 3 to 4.3. I'm trying to "edit in Photoshop" which is not greyed out. Photoshop opens successfully but the image from Lightroom never launches. Is there something I need to enable to allow the photo to open?
View 8 Replies View RelatedWhen I create a 3D Mesh from Grayscale in Photoshop 14.1.2, the resulting depth map appears to renormalize its depth. That is, I apply a levels adjustment to lower the depth map's contrast (e.g., output levels to 0 and 12), and that has no effect on the mesh. However, if I add a bit of white to the map, the other areas of the mesh flatten with the white spot becoming the high point. If I remove the the painted bit, the map renormalizes such that its lightest value acts like white, and darkest black, even if they are not.
View 3 Replies View RelatedHow to fix broken / destroyed layer masks (or the reason for that phenomenon)?
After clicking Alt+Click the whole picture transformed into rectangular fields and all masks are broken. I save the file 5min before that accident and it still works - only this file is dead
1st picture: accident
2nd picture: how it was before
last 3 pictures: layer masks right now... yes they are changing
Photoshop CS6 (student version) Version 13.1.2 x64 MacBook Pro: Mountain Lion 10.8.42.7 GHz Intel Core i716 GB 1600 MHz DDR3 NVIDIA GeForce GT 650M 1024 MB
MacPro1,1 (32bit kernel, 64bit OS X 10.7.5)
x5355 8-core 2.67GHz CPU,
32GB RAM,
4-Drive RAID0 System and data drive (four new 3TB Seagate Barracuda [fast] drives)
GTX 570, 1.3GB - Recognized by PhotoShop for OpenCL and OpenGL
PhotoShop CC (v 14.1.2 x64) Trail (about 5 days into it)
1) I can open a video and play it back at the speed of the video.
2) I can not get playback faster than 1 fps if there are any filters applied - the pre-render / buffering isn't working at all.
3) I can not "Render Video" by choosing either "Render Video from the menus or the Export Arrow button in the GUI.
As soon as I select either I get a Progress Bar that that says "Initializing Video Export" but never finishes. I have waited as long as 4hrs and still no dice.I've tried with more than a few different videos and the result is always he same. Here are three of the videos I have tried with:
P00001_Cell-cell-cel..
P1020060-25p_ReEncod..
The_1st_12hrs.mov
I use modified versions of the standard round brush for my art. And just a few days ago when I started up photoshop, my transfer and shape dynamics tools were not working. I can tick them on and off, edit the sliders and such but it doesn't effect the brush like it should.
I tried re-booting the brushes and resetting the painting workspace but it didn't make a difference. I then uninstalled photoshop under the impression that if I re-installed it, it would load up photoshop with factory settings. But it just re-loaded the broken version I thought I had deleted and it has no icon now.
Have a scanned glass negative that is broken. How to attach the broken pieces in Photoshop .
PC W7x64
CS5.
Has anyone been able to successfully import a collada Model containing textures into Photoshop CS4? I've been trying to open collada models from google's 3D warehouse, and when I open them, I don't see anything. It's clear that Photoshop creates a 3D layer, but you don't see anything by default.
When I play around with the imported layer, it's clear that some of the 3D information is there. If I set the render mode to box, wireframe, or any of the settings that don't deal with textures, I can actually see something a rudimentary version of the model.
I actually tested importing a collada model in CS3 Extended at work, and it imported fine, showing the textures and everything. When using CS4, I get the problem described above.
I've actually seen this issue both on Mac and PC versions of CS4.
How would I create a dotted or broken lined stroke around a selection.
View 1 Replies View RelatedIn PSE 9 when I "sometimes" save a picture, I get a broken picture symbol. I have gone to file/reconnect and this does not work. I can't figure out what I'm doing different when this happens, as it only happens now and then.
View 10 Replies View Related