I just upgraded from Lightroom 3 to 4.3. I'm trying to "edit in Photoshop" which is not greyed out. Photoshop opens successfully but the image from Lightroom never launches. Is there something I need to enable to allow the photo to open?
View 8 RepliesWhenever I try to collapse a group of edges in Edit Poly mode there is always 1 edge that is left intact therefore creating undesired results. This doesn't happen in Edit Mesh mode, and also behaves accordingly in previous versions of Max.
Currently using Autodesk® 3ds Max® 2014 Version 16.0 commercial
Mesh mode example:
Specs:
Autodesk® 3ds Max® 2014 16.0 SP3 commercial
Windows 8.1 x64
Nitrous (Direct 3D 11.0 Feature Level 11 - NVIDIA GeForce GTX 780)
I'm using fcp hotkey , by default the 'drag copy (single frame)' is mapped to ' alt-c' . Normally this will work fine. But in some case where a cfx clip is selected or my time indicator is parked on top of a cfx clip in active timeline , then do 'alt-c' will give an error message "connectfx cannot be modified inside the containers. Proceed with edit ? "
So to solve this temporarily, i have to first deselect the cfx clip or move the current positioner on top of a non-cfx clip.
Is there any way to get the broken symbol in a broken dimension like shown below?
View 9 Replies View RelatedI have a set of precious digital images, they are actually fairly low-res scans of prints but they are irreplaceable and cannot be re-scanned.
The images exhibit the following issues and I don't know how to fix them:
1) In the LR import dialogue box they show up as "Preview unavailable for this file".
2) When I attempt to import to LR, I get the error "The following files were not imported because they could not be read".
3) If I open the file in Photoshop CS5, I get the warning "The embedded ICC profile cannot be used because the embedded ICC profile is invalid. Ignoring the profile" - if I ignore, PS can open the file but of course the colour profile is missing and the images look universally awful.
Curiously however the images DO provide a preview in Windows Explorer, and if I open them with the infinitely inferior Windows Live Photo Gallery, they open correctly and the colours are as they should be.
This all leads me to believe that there is something wrong with these files which Windows is OK with but Adobe is not. Since I do not have the paper prints, cannot rescan, and do not know the workflow process applied, I have absolutely no idea whether this happened at scanning time or subsequently.
HOWEVER surely, in this day and age, there must be a tool which allows me to package the information Windows can read and put it back into the file where it should be so that Adobe can read the same thing?
I've had trouble since upgrading from LR3 to LR4 with previewing files on import. Sometimes reports no import, sometimes just shows thumbnail; sometimes fails on all photos, sometimes on just some. Happens for different file formats (ie, JPEG, raw from different cameras), different card readers, different USB ports. Canceling the import and selecting import again seems to be a workaround, but this is annoying nonetheless.
View 3 Replies View RelatedI am a relatively new user to LR and I moved a few hundred images on my Mac without realizing that it should have been done through LR. I now have a few hundred broken image links. The tutorial seems to indicate that I must re-connect them one by one. Is this true or is there a ya I can connect multiple images in folders?
View 1 Replies View RelatedImages brought in to LR4 used as layout overlays are the wrong proportions - they are slightly skinnier. It makes the feature unusable.
View 2 Replies View RelatedI take a series of images, insert the SD card into the card reader and import the images into LR 4.3 RC.
Later after taking more images I insert the SD card into the reader, click Import in LR and it now imports all the old images again with '-2' appended to the file name.
'New Photos' is selected at the top of the Import dialog window.
LR 4.2 did not do this as far as I can recall - is this a known problem in 4.3 RC?
Happens on Windows 7 64 bit and OS X Mountain Lion.
After installing LR4.1 RC2 i have lost the link to PS6 when working with CR2 files... when i right click "edit in" PS6 opens but no document is created... when i do teh same with a DNG file all works fine... perhaps it is an issue with Camera Raw compatibility?
Both CR2 and DNG work fine with PS5.5...Obviously this is not a major issue but it is behavior that needs to be fixed...
I'm running LR5 on Windows 64 bit and have noticed that the flag accelerator keys, P, U and X don't work. When I press these in the Library module, the text pop-up tells me that the appropriate flag state is being set but the flag never actually changes state. To change the flag, I have to right click and use the "Set Flag..." context menu. This makes editing a lot slower since I can no longer move through all the shots and pick selects and rejects using the keyboard.und?
View 2 Replies View RelatedI have a set of images that fit within 1400x1050. I want them to fit within 1024x768. As I have done before, I set the export directory, choose 1024x768 as the export size, highlight all of the images and click export. The first image in the set shows what iis going wrong. It starts out as 680x1050 and finishes as 680x1050. Clearly this is wrong - it is not resizing.
some of the images ARE corectly resized. Random ones are not.
I moved from an XP based PC to a Mac Pro running Lion. I copied LRcat to the new location and all photo files. Catalog opens and works fine in the Folders tab, but all of the Collections links are broken. Each of the collections links are pointing to the old location on the pc: C:usermy documentsphotoslightroom....
I have tried to right click on the collection folder and point it too the new location. This seems to be processing the change, but results in loss of info in the old C: location and does not redirect the Mac collection to the right place.
Is there any way to fix this at the top level without having to delete and recreate all the collections?
I'm using Light Room 1.3. on a Mac. My catalog is in my user/pictures folder, but my photos were kept in a large number of nested folders and subfolders on an external hard drive. The hard drive died. I have backups of all the photos and a fairly recent backup of the LR catalog, but when I open the catalog or the backup, all the paths to the photos have been broken. The folders appear in red in the "Folders" window of LR. I know how to relink the individual folders by using "Locate Missing Folder", but I've got hundreds of folders listed. The top level folders are not listed--there were basically three folders in which all the rest were located (sometimes several folders down). Is there anyway to re-establish the paths without doing so for each individual folder? how I might re-arrange my thousands of photos so this can't happen again. I was just about to upgrade to a new iMac and LR4, but am afraid of the same thing happening when I transfer everything to the new computer.
View 6 Replies View RelatedI dragged over about 200 GB worth of pictures from my internal drive to an external within Lightroom. In doing so, a majority of my images did not retain their associations.
For example. a picture whose name in a folder is: /pic1.nef
but in the gallery it's named: /pic1_2.nef
So, the association is broken. Is there a way to mass rename everything that has the string "_2" in it and remove it. I.e, go from pic1_2.nef to pic1.nef.
Since upgrading to Lightroom 5 I've been seeing this nasty bug pretty much all the time. In the library module choose a folder where a bunch of photos already have ratings. Select the attribute filter and choose to only display photos with a rating of exactly 4. Now open one of the photos and switch to the develop module. Then click to change the rating to 5. Now go back to the library module, clear the filter and look at what filter the photo actually got. For me it gets changed to a rating of 1!
This was tested on Lightroom 5.0 on Windows.
I'm running on LR 5.3, but this problem persisted in LR 5.2. Working in PS CS6 and Camera Raw 8.3. RAWs are NEFs from a Nikon D600.
I can't figure out what happened but suddenly I am not getting prompts when moving from LR to PS to "Edit Original" or "Edit a Copy".
I reset all dialog warnings and nothing. The prompt will appear for TIFFs but not for NEFs.
It's kind of pointless to not be able to choose to edit an original or copy with LR adjustments for a RAW when they are the file types that retain my RAW editing information.
Plus, when I do click on a NEF and choose to edit in PS without the prompt (it will appear with lightroom adjustments, not as original), it will open a second icon for photoshop on my dock, and prompt me to continue trial? I have a version of PS installed with the serial plugged in, and in LR "edit in PS" for a TIFF will open this primary version.
After installing LR 3.2, the first thing I noticed is that it is much slower than the previous version (using XP Pro + 3GB memory and a speedy processor).
But the most terrible novelty of this version is that the Adjustment Brush is going berserk after a while:
It first slows down to a crawl, so slow that it's almost impossible to work with.While working with it after a while, it starts to show random rectangular areas that are copies of other areas of the image that have nothing to do with the area I'm working on. This happens after a brush stroke. The Undo command makes these rectangular "patches" disappear.From time to time, the whole image is flipped upside down (You can't believe it? Neither could I) eventually, after a brush stroke, the sandclock mouse cursor is displayed and the program freezes (at this time it can be using over 1 GB of memory although I'm working on a single, standard EOS 5D image). The only way to stop this madness is to kill the process. The Heal/Clone tool also shows a similar misbehavior. I didn't have these problems with the previous version.
the map module is broken after a recent adobe flash update on OSX 10.8.2. It's just a grey screen now when I go to it.
View 6 Replies View RelatedI am trying to access the edit original (edit with) option to edit a photo that has not been edited yet. I right click and go through the edit menu and does not appear or is not available? Would I have to reopen it manual in photoshop or is there a way around this to access that setting? it sometimes does not appear on my already edited photos.
I would prefer not to open each photo again, as some files i do not have and were imported into the document with another computer.
when I edit and save a file in Photoshop CS6 from Lightroom. After I save and return to LR4.2 in Windows Explorer it puts the TIFF in the same directory next to the original RAW file as it should, however in the Library module it gets a different entry. So I end up with the same directory listing with the photocount 1 next to it. It also doesn't show up in the main directory where all the other files are, it's not next to the originel RAW.
I can do "show parent folder" until the point I get to the root directory which then gives me an error message which says.
Unable to choose edit in photoshop from light room. and unable to edit in photoshop
View 8 Replies View RelatedI'm running a Mac and since upgrading to lightroopm 4.4 I can't right click and edit in photoshop. The option is there and it starts photoshop but thats it, there is no photo imported into photoshop. I can right click and edit in a Nik software module with no problem. I'm using the creative cloud so I cant really reinstall from a disc.
View 2 Replies View RelatedI have LR3 and CS5 using the Prophoto color profile on a Windows 7 system. I always shoot RAW (NEF) and usually use both LR3 & CS5 to process an image. The issue I have is after processing the image in LR3, I then use, Photo/Edit in Photoshop, for the image to open in CS5, carry out a couple of further processes (crop & clone tool) and then 'save' (not 'save as'). When I view the 'Edit' image back in LR3 the initial settings have changed considerably. The image is also slightly darker. I have also experimented in carrying out no processes whatsoever in CS5 by going direct to 'save' but the same issues prevail.An example of the difference in settings is:
LR3 settings; Tint +10, Exposure -0.24, Recovery 46 Fill L 3, Blacks 7.
The edit version shows; Tint +1, Exposure -0.41, Recovery 23, Fill L 0, Blacks 5.why the settings in the returning edit version are not the same as those shown in the initial processed RAW version which is also leading to a darker image?
I am wanting to make a panorama. Should I first Edit my RAW files in Lightroom 4 then Merge in Photoshop 6, or Merge in Photoshop 6 and then Edit in Lightroom 4?
I can easily edit the RAW files first and then go back and redo them if I have to in Lightroom, but if I Merge it first in Photoshop I no longer have a RAW file to play with.I am using .DNG files in Lightroom.
When I right click a photo in LR 4.2, I cannot get the option to edit in Photoshop Elements 11. The option to open in Photoshop is greyed out. What do I need to do to fix this? I have the Preferences in the Eternal Editing tab set to edit as a PSD, sRGB, 8 bit.
View 6 Replies View RelatedSudenly the edit in photoshop option has been greyed out in both programs It has always worked and for no apparant reason that I can recall this has happened
View 12 Replies View RelatedI am running Lightroom 4.4 with Camera 7.4 and Photoshop CS 6 will no longer let me edit directly from Lightroom. I am on an IMac running the most recent OS, OS X 10.8.3.
View 9 Replies View RelatedI am using Lightroom 3 on my Mac. I have been unable to switch from Lightroom to "Edit in Photoshop" when I go to the "Photo" menu - the words are just not highlighted. I have tried to access this through Library and Develop.
View 3 Replies View RelatedI reinstalled both LR4.2RC and Photoshop CS5 on a new drive. But now I can't seem to edit in Photoshop from LR. Am I doing something wrong? It worked fine before (except for getting the "Render in Lightroom" thing because of the differnece in process versions). Using Windows 7 Prof. Cntrl E no longer works and Edit in Photoshop is grayed out on the drop down menu. Both work independently just fine. A setting in LR perhaps?
View 1 Replies View RelatedI have uninstalled PS CS6 and Lightroom and reinstalled PS CS6 then LR4.1. When I select EDIT IN Photoshop CS6, PS opens but freezes after a few seconds and the file is never transferred into PS. Files will open when I select other 3rd party editors like Photomatix Pro.
LR Version 4.1
Camera RAW version 7.1
Photoshop Version
Adobe Photoshop Version: 13.0 (13.0 20120315.r.428 2012/03/15:21:00:00) x64
System Information:
Operating System: Windows 7 64-bit
Version: 6.1
System architecture: AMD CPU Family:15, Model:10, Stepping:0 with MMX, SSE Integer, SSE FP, SSE2, SSE3
Physical processor count: 6
Processor speed: 2812 MHz
Built-in memory: 16382 MB
Free memory: 12911 MB
Memory available to Photoshop: 14680 MB
Memory used by Photoshop: 70 %
Image tile size: 132K
Image cache levels: 4
The GPU Sniffer crashed on 5/31/2012 at 6:40:23 PM
OpenGL Drawing: Disabled.
OpenGL Drawing Mode: Advanced
OpenGL Allow Normal Mode: True.
OpenGL Allow Advanced Mode: True.
OpenGL Allow Old GPUs: Not Detected.
Video Card Vendor: ATI Technologies Inc.
Video Card Renderer: ATI Radeon HD 5570