I am a relatively new user to LR and I moved a few hundred images on my Mac without realizing that it should have been done through LR. I now have a few hundred broken image links. The tutorial seems to indicate that I must re-connect them one by one. Is this true or is there a ya I can connect multiple images in folders?
View 1 RepliesI am running C3D 2013.
Is it a good practice to have several WMS connections already connected to the provider in our standard "dwt" template file? Will this affect the speed or performance of a drawing?
I have many slides, scanned over the past 10 years, with duplicate file names and filed by date. I converted my Elements 9 from PC to iMac and many incorrect connections occured. Is there a way I can correct these connection errors? This problem involves about 5% of my 25,000 photo files.Â
View 2 Replies View RelatedIs there any way to get the broken symbol in a broken dimension like shown below?
View 9 Replies View RelatedI seem to have issues with this particular file from sketchup pro, Ive tried converting the .bak file without luck, on my mac the file briefly opens then closes.
I am using autocad 2013 student and also tried opening it on other computers with the same result.
I want to get the "file.displayName" property of a RasterItem from a file where links are broken.the script :
Â
myItem = app.activeDocument.selection[0];
myItem.file.displayName;
Â
works fine if the RasterItem source file is where the link points at.In my case, the link points to the local drive of another computer, so the "file" property of the RasterItem doesn't exists !!!I don't understand why, because all the informations are in the Links pannel of illustrator.
I just upgraded from Lightroom 3 to 4.3. I'm trying to "edit in Photoshop" which is not greyed out. Photoshop opens successfully but the image from Lightroom never launches. Is there something I need to enable to allow the photo to open?
View 8 Replies View RelatedI have a set of precious digital images, they are actually fairly low-res scans of prints but they are irreplaceable and cannot be re-scanned.
Â
The images exhibit the following issues and I don't know how to fix them:
Â
1) In the LR import dialogue box they show up as "Preview unavailable for this file".
Â
2) When I attempt to import to LR, I get the error "The following files were not imported because they could not be read".
Â
3) If I open the file in Photoshop CS5, I get the warning "The embedded ICC profile cannot be used because the embedded ICC profile is invalid. Ignoring the profile" - if I ignore, PS can open the file but of course the colour profile is missing and the images look universally awful.
Â
Curiously however the images DO provide a preview in Windows Explorer, and if I open them with the infinitely inferior Windows Live Photo Gallery, they open correctly and the colours are as they should be.
Â
This all leads me to believe that there is something wrong with these files which Windows is OK with but Adobe is not. Since I do not have the paper prints, cannot rescan, and do not know the workflow process applied, I have absolutely no idea whether this happened at scanning time or subsequently.
Â
HOWEVER surely, in this day and age, there must be a tool which allows me to package the information Windows can read and put it back into the file where it should be so that Adobe can read the same thing?
I've had trouble since upgrading from LR3 to LR4 with previewing files on import. Sometimes reports no import, sometimes just shows thumbnail; sometimes fails on all photos, sometimes on just some. Happens for different file formats (ie, JPEG, raw from different cameras), different card readers, different USB ports. Canceling the import and selecting import again seems to be a workaround, but this is annoying nonetheless.
View 3 Replies View RelatedImages brought in to LR4 used as layout overlays are the wrong proportions - they are slightly skinnier. It makes the feature unusable.
View 2 Replies View RelatedI take a series of images, insert the SD card into the card reader and import the images into LR 4.3 RC.
Â
Later after taking more images I insert the SD card into the reader, click Import in LR and it now imports all the old images again with '-2' appended to the file name.
Â
'New Photos' is selected at the top of the Import dialog window.
Â
LR 4.2 did not do this as far as I can recall - is this a known problem in 4.3 RC?
Â
Happens on Windows 7 64 bit and OS X Mountain Lion.
After installing LR4.1 RC2 i have lost the link to PS6 when working with CR2 files... when i right click "edit in" PS6 opens but no document is created... when i do teh same with a DNG file all works fine... perhaps it is an issue with Camera Raw compatibility?
Â
Both CR2 and DNG work fine with PS5.5...Obviously this is not a major issue but it is behavior that needs to be fixed...
I'm running LR5 on Windows 64 bit and have noticed that the flag accelerator keys, P, U and X don't work. When I press these in the Library module, the text pop-up tells me that the appropriate flag state is being set but the flag never actually changes state. To change the flag, I have to right click and use the "Set Flag..." context menu. This makes editing a lot slower since I can no longer move through all the shots and pick selects and rejects using the keyboard.und?
View 2 Replies View RelatedI have a set of images that fit within 1400x1050. I want them to fit within 1024x768. As I have done before, I set the export directory, choose 1024x768 as the export size, highlight all of the images and click export. The first image in the set shows what iis going wrong. It starts out as 680x1050 and finishes as 680x1050. Clearly this is wrong - it is not resizing.
Â
some of the images ARE corectly resized. Random ones are not.
I moved from an XP based PC to a Mac Pro running Lion. I copied LRcat to the new location and all photo files. Catalog opens and works fine in the Folders tab, but all of the Collections links are broken. Each of the collections links are pointing to the old location on the pc: C:usermy documentsphotoslightroom....Â
Â
I have tried to right click on the collection folder and point it too the new location. This seems to be processing the change, but results in loss of info in the old C: location and does not redirect the Mac collection to the right place.
Â
Is there any way to fix this at the top level without having to delete and recreate all the collections?
I'm using Light Room 1.3. on a Mac. My catalog is in my user/pictures folder, but my photos were kept in a large number of nested folders and subfolders on an external hard drive. The hard drive died. I have backups of all the photos and a fairly recent backup of the LR catalog, but when I open the catalog or the backup, all the paths to the photos have been broken. The folders appear in red in the "Folders" window of LR. I know how to relink the individual folders by using "Locate Missing Folder", but I've got hundreds of folders listed. The top level folders are not listed--there were basically three folders in which all the rest were located (sometimes several folders down). Is there anyway to re-establish the paths without doing so for each individual folder? how I might re-arrange my thousands of photos so this can't happen again. I was just about to upgrade to a new iMac and LR4, but am afraid of the same thing happening when I transfer everything to the new computer.
View 6 Replies View RelatedI dragged over about 200 GB worth of pictures from my internal drive to an external within Lightroom. In doing so, a majority of my images did not retain their associations.
For example. a picture whose name in a folder is: /pic1.nef
but in the gallery it's named: /pic1_2.nef
So, the association is broken. Is there a way to mass rename everything that has the string "_2" in it and remove it. I.e, go from pic1_2.nef to pic1.nef.
Since upgrading to Lightroom 5 I've been seeing this nasty bug pretty much all the time. In the library module choose a folder where a bunch of photos already have ratings. Select the attribute filter and choose to only display photos with a rating of exactly 4. Now open one of the photos and switch to the develop module. Then click to change the rating to 5. Now go back to the library module, clear the filter and look at what filter the photo actually got. For me it gets changed to a rating of 1!
Â
This was tested on Lightroom 5.0 on Windows.
After installing LR 3.2, the first thing I noticed is that it is much slower than the previous version (using XP Pro + 3GB memory and a speedy processor).
Â
But the most terrible novelty of this version is that the Adjustment Brush is going berserk after a while:
Â
It first slows down to a crawl, so slow that it's almost impossible to work with.While working with it after a while, it starts to show random rectangular areas that are copies of other areas of the image that have nothing to do with the area I'm working on. This happens after a brush stroke. The Undo command makes these rectangular "patches" disappear.From time to time, the whole image is flipped upside down (You can't believe it? Neither could I) eventually, after a brush stroke, the sandclock mouse cursor is displayed and the program freezes (at this time it can be using over 1 GB of memory although I'm working on a single, standard EOS 5D image). The only way to stop this madness is to kill the process. The Heal/Clone tool also shows a similar misbehavior. I didn't have these problems with the previous version.
the map module is broken after a recent adobe flash update on OSX 10.8.2. It's just a grey screen now when I go to it.
View 6 Replies View RelatedI just used the help file for the first time in ages and noticed all the links to the graphics are broken hence no diagrams etc. I tried to search out where they are usually stored and it gives some weird Address under properties. It's a vba so suppose it's a database? How do I restore the links without having to do a re-install?
As to the pen: How do you stop the annoying over-the-top predictive curve that happens past the node in the next section after a long drag to form the first curve. i.e. you simply want to draw a straight line after dragging out a curved section previously and you get this unmanageable curve to deal with ?
When i go into Edit > Remote Connections and enable it, then set a password and click ok, I get the following error:"Could not complete the Remote Connections command because of a program error"
Â
This used to work fine, not sure what has changed. On win7 x64. CS5.5 Extended (12.1), when i try to connect and send a script, I always get: "Error handling network messge". I suppose these two are related?
found these two things under the Window option in Photoshop CS4...i'm not sure if they are new or not, but i'm also not sure they are working properly. I understand Kuler....its a color-scheme/inspiration list linked to things you search for, using the internet connection of course. But about Connections....how does this work? It brings up a log-in screen, which you log into using your Adobe ID....so i do that, and then i get this: (image in the attatchment "image.png"). This makes no sense....it looks like its trying to tell me i done something wrong, but i haven't, and it says log out...but also sign in above it, even though i just did. The first time it brought this up, Photoshop crashed with an error report.
View 1 Replies View RelatedI´ve been building an airplane. After sculpting in rivets and some detail onto the wing i wanted to retopologize to get a lowpoly. But the new surface doesn´t always stick to the original object, when i try to let it go around the whole object it connects the vertices through the wing instead of sticking to the surface. This usually happens when i start at the top of the object-i place loops around it and when i try to close them at the bottom it "steals" the working surface on the top and pulls it down.
View 1 Replies View RelatedI understand the process of splitting faces and applying a Bonded Contact between the split faces when you have a bolted connection with a nut, but what kind of contacts would you use for say a threaded connection?For example, suppose you have a plate that will be bolted to a mold. The plate has clearnace holes for said bolts and so that the bolts are threaded into the mold to be lifted. The plate has a threaded hole for the lifting mechanism (Swivel Hoist Ring). Finally, the desired load is applied to the Swivel Hoist Ring and the bolts are placed in pre-tension. I would like to simulate this via FEA but am getting tripped up in the contacts. Also I am trying to make it as simple and efficient as possible (by eliminating any bolts or other parts that are not needed). I use INV Pro 2014.Â
View 4 Replies View RelatedI've got two pieces with 11/16" diameter holes for 5/8" bolts.
When I use Bolted Connection to place nut/bolt in the hole, it detects the 11/16" hole and sizes the bolt to look for 11/16" bolts. There aren't any 11/16" bolts so the window shows no bolts. I have to manually choose 5/8" for the bolt size in order to get a list of bolts to choose from. In my reading, i was thinking this was supposed to have been fixed by 2010, is that not correct?
Also, in testing another theory, after placing the bolted connection andt then editing the bolt size to 7/16" or 1 13/16" in diameter. The bolt doesn't update it's size to reflect the change in the hole. Is there really no correlation here? Is a manual change to existing bolts, nuts, washers, etc going to be necessary if the hole size changes? If i change the thickness of the plate(s) the bolt is going through, using autosolve updates the bolt length, but nothing seems to be checking the diameter of the hole.
If true, kinda harst to be able to make a completely parametric assembly of everything but the fastners.I'm using the Hole method on the bolt connection dialog with pre-existing holes that do not have threads on them.
Is possible to connect a pipe to a structure and not have in connected to the structure center?Â
I have some two-tiered structures that are 108" dia for the bottom section and 48" dia for the top section. The 48" top section is not centered I need my small 12"-15" pipes to connect to this section of the structure.
Civil 3D 2014
Win 7
I have yet to be able to connect to our ArcSDE database using 2011. In 2009 and 2010 Civil 3D I had to move 3.dll files from my ESRI directory to the FDO/bin directory for Civil 3D. This immediately allowed for a connection using CAD's Data Connect.
View 5 Replies View RelatedWhen i try to make a bolted connection my "click to add fastener >Â standard/category" box is empty. my hole, which used hole command, is 11/16" and the bolt only needs to be roughly 2" long so im not demanding odd fasteners.
inventor 2014
Windows 7 Pro 64
i7-3820 3.6GHz
32 GB RAM
2 TB HD
NVIDIA GeForce GTX 660 Ti
Liquid Cooled
3D Connexion
CM Storm
twin ASUS LED
So I've got this part, and it's got bolted connections. There's two of them, and each one is a pattern of multiple #10 machine screws.
No matter what I do, one of them will always have a lighting bolt next to it, as shown in this picture:
Rebuild All doesn't fix it. Manually editing the bolted connection will fix the lightning bolt ... but it will invariably switch to the other bolted connection instead.
Also, another fun little thing I've found: if you grab one of the screws with the mouse and drag on it, only the first bolt in the pattern seems to be actually constrained to the hole. The others appear to have pretty much just distance constraints, maybe plane-axis constraints. You can rotate the whole pattern around the hole that the first bolt was set in. This doesn't seem like a good behavior to allow ...
Anyway, the data set for the above image is attached. The screws themselves aren't, but they're just content center parts and should get automatically generated if you open the assembly.Â
Product Design Suite Ultimate 2013, 2014
Autodesk Inventor 2013
Work: Dell Precision T1600 (Xeon E3-1280 / 16GB / 512 GB SSD / 250 GB (Internal) / 1 TB (External) / Quadro 600)
Home: i7-4770k / ASUS Z87-Pro / 16GB / 250 GB SSD / 1 TB HDD / 3 TB USB3 HDD / 2xRadeonHD 4870 in CrossfireX
Laptop: Toshiba Satellite P755-S5269 (i7-2630QM / 8 GB / 250 GB SSD / 750 GB HDD / GT540M)
We're new to using bolted connection in our piping systems. They work great within a pipeline, connecting flanged fittings, etc. Where we have an issue is across two pipelines. Each pipeline is a sub-assembly, so in the bolted connection wizard it is impossible to select the mating flange on the other sub-assembly as the termination plane for the bolted connection. I want the bolted connection to show up in the BOM for one or the other sub-assembly, not at the top level.Â
Right now what I am doing is manually inserting what would be the mating washer and nut, from the CC and using an offset Insert constraint to make it appear to sit on the face of the mating flange, then pattern that... and THEN run the bolted connection for the bolt and another washer on the other side. This works, but is very time consuming. How this could be done across sub-assemblies, with all of the parts in one sub-assembly's BOM?  Â