My computer crashed and luckily I managed to save a back up copy of all my photoshop brushes. Problem is that they are all in png format and I need to convert them to abr. I've got well over 2000 brushes and this will take me forever to do. Is there a program or a quick way to convert all these png files to abr so I can put them in my brush file?
View 1 RepliesI am working on a museum project. I have been asked to convert full resolution files to web based files using "Save for Web and Devices". The problem is in the file naming. Museums typically use accession #s for each work. Example 1999.63.102 So the digital file would be named 1999.63.102.jpg (or tif).
When I attempt to save the file using "Save for Web and Devices" the resulting name is converted to 1999.jpg I believe the . (periods) to be the culprit. There are hundreds to do so renaming is not an option. This does not occur when I use "Save as".
I want to convert my DGN files to DWG files.
So I write this code in LISP:
(defun C:Batch_DGN2DWG (/path dgnfile SDI_Mode) (setq path "C:\DGN\" ;;Default path for DGN files location. DGNIMPORTMODE 0 ;;Imports the DGN file in a new drawing file. SDI_Mode SDI ;;Save Current SDI MODE SDI 1 ;;SET Single Drawing Mode for AutoCAD. );;setq (foreach dgnfile (vl-directory-files path "*.DGN" 1) (progn (command "-dgnimport" (strcat path dgnfile) "" "" "" "y" (strcat path dgnfile ".DWG")) (delay 100) );;progn );;foreach (setq SDI SDI_Mode) ;;restrore SDI Mode to previous value.)
but I can't finish it!
I attached some DGN files for test purpose.
What they are using to convert RAW files with the new Canon 5D Mark III? This is a bummer!!
View 13 Replies View RelatedYears ago I scanned old family photos using Adobe Photoshop and saved them as pdf files. Now I don't have the software to open them. I've read online that I may have success if I download software called Image Converter Plus. Should I go that route or will today's Adobe Photoshop software convert them? I currently do not own any of the Adobe products.
View 4 Replies View RelatedI'm building palette's for another application that is not presently capable of reading the Adobe Color Swatch file .aco and would like to initially develop the palette in CS6 Photoshop, save the swatch file and then produce a file in similar fashion as is already used in Flash; namely the .clr file; e.g. the sample below where the last values given on each line are in RGB.
wrangle the .aco into an RGB ASCII, either from within PS or from some other application ?
ColorMap 1 1 -95700000.000000 34 15 51 -10634881.000000 20 1 38 -7656000.000000 72 54 88 -5742000.000000 120 104 135 -3828000.000000 169 155 183 -1914000.000000 212 200 225 -50000.000000 241 229 251 -45000.000000 255 0 0 0.000000 255 0 0 45000.000000 255 0 0 50000.000000 234 252 244 1914000.000000 193 212 202 3828000.000000 132 154 143 5742000.000000 66 91 79 7656000.000000 15 42 29 8511802.000000 0 27 14
I have Photoshop files that have UI elements but i don't know how to use it in illustrator as with normal copy and paste it doesn't work, i tried to open the files in illustrator and although i choose the option convert layers to objects but that doesn't work as all layers are converted to a one whole image ?
View 2 Replies View Relatedwill I be able to convert raw files from my new Sony A99 using my SC5's ACR 6.7?
View 2 Replies View Relatedmy new camera takes MVI files which will not open in ps elements slide show.. How do i convert the files to WMV?
View 1 Replies View RelatedI recently downloaded cs5 and it won't download .mp4 files to layers. whenever i go to file > import > video frames to layers, the mp4 files are greyed out and i can only click on .avi files.
there is no high quality converter from mp4 to avi, so it's quite frustrating.
I want to save space in my external hard drive by converting RAW files to DNG files. How to create an action for batch processing these files.
View 7 Replies View RelatedI have a few files that I need to make ASAP into banners that are 19ft x 15ft and many other sizes. I can only change into a RAW Photoshop or a tiff. I tried saving into a tiff then converting but nothing is working.
I was also going to try to convert into a AI program then into a vector but with no luck.
im having problems with saving my tiff files and converting. once i convert them to jpegs to email or go to the printers, they are changed and are washed out as if the org tiff before editing. when i open on my comp they are ok but when emailed to someone or once printed are destroyed. i dont
think is my colour management as org jpegs files are fine. below are some details of the process. the thumbnails on my mac are even off with colour.i open my file (pro photo RGB, 16bit, 3888x2592 10.1MP)i edit the photo. if saving in jpeg i change to 8bit and save with the embedded colour profile button clicked
Dowmnloaded Elements 11 thinking it would convert Canon Raw-2 files to tif, but it will not why?
View 2 Replies View RelatedHow can I convert Adobe psd phopt files to jpeg or gif files?
View 4 Replies View RelatedWhen i try to convert the ARW files with dng converter ver.6.2 it returns the error "The source folder does not contain any supported camera raw files."I have a Sony NEX6 which is not explicitly listed as supported. The nex 6 is very similar to the NEX5 that is supported.
View 4 Replies View RelatedI just bought a Nikon D7000 camera & need to convert Nikon RAWS (NEF) files & they are not recognized by my Adobe CS4 on my Mac 0sX 10.6.8
Do I need to update to CS5 or CS6. Also, would like the new software to allow me to still convert older pre-existing RAWS that are in my photo archives.
After much work, and after I convert my Nikon D7100 NEF files to DNG, Camera Raw starts when I open the DNG file. What is very strange it that it indicates I am using Camera Raw 7.1 with a Nikon D7100 file.
(Strangely enough, I have not found a way to launch Camera Raw directly.)
===========
Anyway, I have only 2 tools in camera raw: Basic and detail.
I absolutely need the chromatic aberration tool. And a few others would be great.
Where do I get this ? How do I install it ?
In elements 10 i used to be able to convert multiple .nef files to various jpeg resolutions at one time by using "process multiple files" under the file heading. When i try to do this inelements 11, that option is unavailable (unhighlighted). How do i do this?
View 3 Replies View RelatedI just purchased the Canon T4i and us PE9. PE9 doesn't support the new raw format. I tried using Adobe DNG converter as Adobe recommended. That didn't worl either. How to convert these raw files so that PE9 will recognize them?
View 10 Replies View RelatedI have a D7100 and PSE10 -- I learned (after the fact...) that PSE 10 can not open D7100 RAW files. I have tried using the DNG converter but do not want to have to do this. I also purchased Lightroom 5 in ordert to solve the problem, but again (after the fact...) learned that LR5 doesn't work with VISTA, which is that my desktop has. I know mostly my fault for not researching enough.... but I really just want to open the D7100 RAW files directly in ACR. Will PSE 11 support D7100 RAW files without having to convert to DNG first?
View 1 Replies View RelatedI am trying to use Elements 10 to convert Panasonic RAW files to JPEGs for web use. The batch runs, but prompts for a "save" location at every file. I have reinstalled Elements, reinstalled the Camera RAW update, and have ensured I have ownership of source and destination folders (in Windows 7).
I have tried several folders, set up test folders etc. and nothing seems to work.
I have many PSD files from photoshop – with layers, masks, adjustment layers, nested groups, smart filters, layer styles and editable text at 600dpi with embedded color profiles. The idea is to import them all into lightroom and make a book.
Should I flatten the files and make them into tiffs or jpegs?
Does it make sense to keep them at 600dpi or Blurb will downsample them to 300 anyway? (if so I would rather do it myself, if not is there an option to control the output resolution?) What happens to color? – How do I ensure the best match between what I see on the screen and what the book will look like?
How do I convert a number of TIFF files into Jpegs all at one time
View 1 Replies View RelatedI used Adobe DNG Converter version 8.3.0.141 to convert .rw2 files created by my Panasonic Lumix FZ200 camera. These files won't transfer into the Organizer and, when trying to open them from the Editor, I get an error message saying the file can't be opened "because it is the wrong type of file".
View 3 Replies View RelatedRecently, I have needed to convert my CR2 or DNG files to CMYK profile for a printer. It is my understanding that PS Elements (any version) does not support CMYK profiles. I am an avid amateur I think I need to change from Photoshop Elements to CC or PSCS. What would be the most cost effective way to accomplish this goal?
View 2 Replies View RelatedHow do I process multiple files and turn them from raw to jpeg. Ive tried and it seems to go through the files but doesnt seem to process them or store them in the selected folder
View 4 Replies View Related10.7.4/Mac Pro/PhotoshopCS6 13.0 - When cmyk converting a multilayered rgb file layers containing transparency doesn't convert to same profile as layers not including transparency, e.g. a product with a shadow - each on separate layers.
the product layer is converted to working Color settings but the transparent layer isn't and is converted completely different, both grayscale and UCR/GCR.
I am trying to batch convert several thousand TIFF files to lossless JPEG-2000, but I can't get it to work.
When I open a single file and "Save as" JPEG-2000 with the lossless option checked, the result is truly lossless. But when I record this as an Action and then Automate/Batch this action, the output is not saved as lossless.
I just set up a new PC and loaded Pro X2 that I had bought a year ago. I also downloaded the patches. It appears that I can not place a MOV file into the timeline like I could with version 10Plus. 10 Plus did not work well but it did load. So, am I missing something here or do I need to convert all MOV files into something else.
View 9 Replies View RelatedCan AutoCAD LT convert pdf files into dwg files?
View 9 Replies View Related