It seems, by default, Photoshop CS 5.5, has only a limited number of brushes. I want my kindergarten students to have access to all of the brushes available in CS 5.5, so I've had these brushes by way of appending, for each individual student. having all of the brushes populate from the start?
View 4 RepliesWith the new paint brush features, specifically using the mixer and the new brushes, every paint stroke I make just lags and gets stuck, hanging until it catches up....I have a Xeon Quad and 18 GB of RAM in my pc.....Is there a special way to set prefs or something else??
View 25 Replies View RelatedBrushes keep un installing. CS6, Windows7. Is there away to load more then one brush at a time?
View 2 Replies View RelatedEvery single time I activate the Adjustment Brush, Mask, and Filter tools, they activate with the "Iris Enhance" preset active. So when I start editing the first thing I have to do is reset the tools to zero every. single. time. Yes a double-click isn't that big a deal, but LR4 did not do this. I have not changed any settings since going to LR5 and I can't stand this issue anymore.When I use these tools, the adjustments I'm making are highlights, shadows, noise, clarity, etc. Individual sliders. So why does "Iris Enhance" keep turning on when never even touch the effects? In LR4, after finishing an edit with a brush, mask, etc., I would press the Enter key and it would switch to a "new" brush/mask. At that point, the Effect would automatically switch back to Default. How can I make LR5 do this? I want it to jump back to default slider settings after every time I press Enter.
View 1 Replies View RelatedI am interested in grouping and sorting brushes according to size, shape, whatever.
Right now when I add a brush library, they just stack on top of one another.
For example let's say I have a round brush with a 10 diameter, then next to it a round brush with a 20 diameter. If I make a 15, it goes to the bottom of the list, and I have to scroll all around. How can I group them?
I suspect I would have to make my own brush library with my brushes how I want them, then save that and load it?
How do I populate the address book when trying to send a photo(s) by email?
View 1 Replies View RelatedI have just rendered an animation with moving people trains cars etc. My people were done with populate. They are theonly objects that flash. All other animated objects are fine.
View 3 Replies View RelatedI am using P&GD2013..If I use a template from the designs gallery it will automatically replace photographs and create new pages to match the number of photographs I import. If I make my own template I can't make it do that.I have tried modifying a supplied template but that seems not to work either. All I want to do is to create a template of an A5 landscape page with one centred 7 x 5 photograph and then import forty photographs. Do I really have to drag each one from the bitmap gallery ?
View 5 Replies View RelatedLike the title says is there a way to save a single mesh from the populate feature? Also are there other premade meshes available? Such as beach people etc..
View 6 Replies View RelatedI just noticed that I get a "3dsmax.exe process no response" when I try to render a scene that has populate people in it on backburner
View 1 Replies View RelatedI have been using the new populate feature. I would like to use custom skins. I have several biped figures that are what I would like to use for textures. I am not sure how the mapping works and you can not just copy the textures over.
What do I have to do to take my texture from my biped skinned character and apply it to the populate character?
What i want to do is popluate a Listbox with with the area of previously selected Objects.This is what i have at the moment:
i = 0ListBox1.ColumnCount = 2For Each ssetOBJ In sset objarea = ssetOBJ.Area i = i + 1 With ListBox1 .AddItem .List(.ListCount - i, 0) = "Fläche" .List(.ListCount - i, 1) = objarea End With Next.
But the code only writes the area of the last Object in the first Row of the Listbox.I think in the FOR EACH Expression the variable "i" pass always "1" for the Row Number.
Is there a way to populate a ListBox with all of my Action Recorders?
View 1 Replies View RelatedI'm using AutoCAD 2014. When we upgraded from 2013 I migrated all of my tool palettes and settings over to 2014 earlier this year. All seemed normal up until Friday when I created a new palette. That part was normal, but when I tried to drag a block from Design Center to that tool palette it wouldn't populate. It seemed like it was going to, it gave me that typical >---< under where the block would show up in the tool palette, but when I tried to release it in the palette, nothing.
Additionally, if I right click on a directory/folder in design center and select "Create Palette of Blocks" (which I have done a million times before), it will create the tab of the directory/folder I have created but does not populated it with the blocks within that directory/folder. Leaving me with a blank Tool Palette.
I just want to ask if its possible to swap or change the models wich are used by the new populate function? The texture can be changed when i overwrite the original ones in the temp folder. Is that true?
View 1 Replies View RelatedI need to populate a park/sports complex. I need a few people walking and a few people running. I don't have any experience with animating people. What is the best way to do this? I have used 3ds Max for years but never animated people. I found some models on turbo-squid. Should I purchase rigged models? Do I need to purchase mo-cap or is walking/ running easy to do in Max?
View 2 Replies View RelatedI have to add 80 Xdata to some objects. How to populate them within a loop. This what I did for 11 of them . But
I am pretty sure there is a way to do it in a loop which I don't know .
Public Sub SetXData2()
Dim doc As Document = Application.DocumentManager.MdiActiveDocument
Dim ed As Editor = doc.Editor
[Code]....
How to populate an Inventor Multivalue PARAMETER using a For cycle in iLogic according to a variable index corresponding to a different number of array items?
for example:
i grab some data from a Rule and populate an Arraylist variable. I trace the number of instances using a counter. after the data acquisition I want to populate the Multivalue Parameter with the acquired values.
No problem browsing the Arraylist parameter: MyArraylist.(Index)... but what about the Multivalue parameter?
the MultiValue.SetList("Multivalue Parameter", Value 1, Value 2, ... , Value N) provide a defined number of data and cannot be set dynamically according to an Index.
I've been given a floor plan of a building which I need to populate with smoke detectors. The smoke detectors are larger than the entire building. I've used the same smoke detectors on other floor plans and they've always been scaled properly.
Also, I notice the floorplan is 1:250@A3
How to create and populate a new custom dictionary in with vb.net. None of the examples I could find (that I think would work) were written in vb and weren't very well documented. So I guess what I would like is a push in the right direction.
View 9 Replies View RelatedI have more than 2,000 QR codes that I need to insert into this template for printing. I am hoping that there is an automated way to do this so I don't need to resize and place each QR code image by hand.
Is there a batch command or action of some kind that can perform this task for me?
sample1.cdr
I have attached a file, I need to clean up and populate with objects: room names, furniture and etc. This file will contain the object library as well.
I'm using CorelDRAW Graphics Suite X3
It should be.
a. Clean up: If you zoom in 800% this file you will see the corners have spikes. They are not clean.The best way to check it is to extract to a pdf file and check it.
1. Select a piece of a wall. Press "No outline" button. Done. CorelDraw will squeeze a wall a little bit and remove all rubish. The floor plan will still be ok.
I know how to create a new Palette but I need to populate it with some terminal blocks i use every day, I currently open drawings and copy and paste, How do I add the terminal blocks I created to my custom palette. I have AutoCAD LT 2013
View 2 Replies View RelatedI have one drawing with several thousand instances of the same block in it. Each block has a 'name' attribute. I want to populate those block attributes with a spreadsheet. What is the best way in AutoCAD 2013 to do that?
Ideas: the old ATTOUT, ATTIN commands from Express Tools....rather a dated method, but it might work
dbConnect: I've never used it, but might work.
Data Extraction Wizard: I think is just for data extraction from a drawing, but again not sure.
here my code :
Public Function LectureDefLine() As Collection
Dim db As Database = New Database(True, False)
Dim OkErreur As Boolean = False
dim cCollDefTypeLine as collection = New Collection
Try
Dim path As String = HostApplicationServices.Current.FindFile
[Code]...
i use it for populate a ComboxColumn of a dataview.
I want populate a ColumnDataview but not integrate all the linetype in mu current dwg.
This code run but acad crash after .. So have you a function/sub working fine ?
I am trying to use an iLogic rule to populate iProperties (some generic, some custom) from a part number spreadsheet (containing columns such as PART NUMBER, DESCRIPTION, FINISH etc) and the rule keeps throwing up the following error 'Conversion from string "" to type 'Double' is not valid.'
Here’s part of the code (would be extended for the required custom iproperties but I’m assuming the same principle is ok)
StartRule:
'read excel file
GoExcel.Open("C:DESIGNDocumentsEXCEL FILESPART NUMBERS", "PARTS")
'index row 3 through 10000
For rowPN = 3 To 10000
'find first empty cell in PART NUMBER column (Column A)
If (GoExcel.CellValue("A" & rowPN) = "") Then
[code]...
Changing the format of the excel data (number or text) has no effect. Is manipulation of the format required so that Inventor can read text and numbers to iProperties in this way?
I am struggling to populate a list view on my windows form. I have tried various methods but its not working. I can get the values into the listview but where i need 2 columns with many rows, i am just get 5 columns.
my list view needs to populate 2 columns. the first column is visible and shows a part name. the second column is hidden and holds a different value. I recursively loop through records and i need to add a row per record. This is captured with j. How can i add the correct amount of rows per j and the columns to hold the correct data?
I have some files (OK, 11,000 of them) and they have drawings on the bottom and text on the top. I want to erase this text and replace it with data that comes from a database. I don't know where to start.
I need to:
1. preferably find a way to erase the old data on the top, but I could do it manually
2. Insert data from specific fields into specific spots on the drawings.
3. Each drawing would have the same fields but different data corresponding to an account number. The account number is included in the name of the drawing and is a field in the database.
How to get started? I have Map3D as well, which I was told would work better than regular AutoCAD on this, but I also have regular AutoCAD. I can't even figure out how to make the database connection work.
I was wondering if there was a way to import excel datat into illustrator, then it populates a vector pie or bar chart for me?
[URL]
How do you rearrange the brushes in the brushes box?
I've seen they are arranged by name, so how do you rename the brushes since renaming the file name don't rename the brush.
I am struggling to find the right ilogic to extract the state of a multi-value text parameter and use it to populate a single i property.
View 1 Replies View Related