How to create and populate a new custom dictionary in with vb.net. None of the examples I could find (that I think would work) were written in vb and weren't very well documented. So I guess what I would like is a push in the right direction.
How I can tie a key from a custom dictionary to display in a field?
I know that I can dump the custom dictionary into global and the fields can track those values, but instead of strangling my available memory I'd rather track the dictionary key directly. How can I utilize the Entity name or the actual dictionary name & key?
I have been using the new populate feature. I would like to use custom skins. I have several biped figures that are what I would like to use for textures. I am not sure how the mapping works and you can not just copy the textures over.
What do I have to do to take my texture from my biped skinned character and apply it to the populate character?
Any way to create a parcel from an object (closed polyline) and populate the parcel with Object Data from the polyline?
I have imported a .shp file into a drawing and the result is many closed polylines with properties similar to the attached image. I would like to bring this data into a parcel object for labeling purposes.
say you make some parcels in your project with custom data fields like: id_no, permit_no, acres_served etc. you attach an agency provided shape file via an fdo connection that has many fields of information like above.
when you right click on your parcel and do parcel properties you get a tab that lets you input the custom parcel data.
lets say you print an fdo map label showing, say, the id_no, provided in the shape file. Then in your custom parcel properties for id_no you type that in.
is there a way to make an expression to put in the other custom parcel properties that will read, say, the permit_no(id_no) from the fdo like and put that information in the custom parcel property field?
I'm trying to figure out how to create an iLogic rule that would create a Custom iProperties and put in what version of Inventor the file was last updated with.
My ultimate goal is to have a virtual human model that I can re-size parametrically to reflect real-world measurements. I've used MAX to make architectural models and scenes so I know how to manipulate basic shapes in MAX.
how to make some sort of basic-custom geometric shape and control that shape parametrically, like the built-in "Box", "Sphere" and "Cylinder" objects.
I have a dictionary in the NOD with several xrecords. I want to change an entry value in one but the others in the dictionary also get changed. How would they be connected?
This is some simplified code that looks at two xrecords, changes one, then reports the new values. Weird thing is that both xrecords get changed.
For i = 1 To 2 XRecId = MyAppDict.GetAt(i) XRec = trans.GetObject(XRecId, OpenMode.ForRead) ed.WriteMessage(vbLf + "XRecord: " & i & " First Entry: " & XRec.Data(0).value) Next XRecId = MyAppDict.GetAt(2) XRec = trans.GetObject(XRecId, OpenMode.ForWrite) Dim data As ResultBuffer = New ResultBuffer(New TypedValue(DxfCode.Int16, 2), New TypedValue(DxfCode.Text, XRec.Data(1).value)) XRec.Data = data For i = 1 To 2 XRecId = MyAppDict.GetAt(i) XRec = trans.GetObject(XRecId, OpenMode.ForRead) ed.WriteMessage(vbLf + "XRecord: " & i & " First Entry: " & XRec.Data(0).value) Next
After installing AutoCAD on 3 new Windows 7 workstations, one of them can't find the main dictionary. I can find dictionaries (*.dct) by using the Windows Search function, but when I try to specify a path with the Options command, I'm told that there are "None available". What do I need to do to get a dictionary path loaded?
I want to iterate through the Image Dictionary and Connect into the Raster ImageDef Properties.
I want to be able to modify and fix missing Raster Images.
How to get this code sorted out.
For Each myObjID As ObjectId In myModelSpace Dim myEnt As Entity = myObjID.GetObject(OpenMode.ForRead) If TypeOf myEnt Is Image Then Dim myRasterImg As RasterImage Dim myRasterImgDef As RasterImageDef 'Open The Dictionary Dim ImgDict As ObjectId = RasterImageDef.GetImageDictionary(DatabaseIn) For Each dictEntry In ImgDict NextEnd If
i have a set of prints (4 seperate files) and when i try to eport them to pdf, i get a error stating:
Job: - Error(s) Did Not Plot
Job ID: 1
Sheet set name:
Date and time started: 9/25/2013 7:05:02 AM Date and time completed: 9/25/2013 7:05:03 AM
UserID: X.X Profile ID: Total sheets: 1 Sheets plotted: 0 Number of errors: 1 Number of warnings: 0 Sheet: B-0193-1-Model - Error(s) Did Not Plot File: Z:EngineeringPRINTSBPRINTSB-0193-1.dwg Category name: Page setup: Device name: Plot file path: Paper size: ERROR: Internal Error: Failed to get Plot Settings Dictionary.
The file was originally created with Autocad 2010 in 2011. i would post the file but it is a customer print and i cannot disclose it here. we are now running up-to-date autocad 2013. this is not a problem with other files i have had to work with (older and newer). just seemds to be a localized event and am wondering if it is that something is corrupt.
I want to write an overrule to automatically suppress xrecords in extension dictionary while coping but then I test my module, the xreocrd is supressed in the original piece , not the newest one !!
I have been trying to research how to create a custom surface. I found this article [URL]...... about how to to create a surface from a jpeg. The article says to "expand color on the top left." of the style editor. However, when I open the dialogue there is no "color" that can be expanded. The only thing in the top left of dialogue box is "lighting." Is there another step that the article misses, or is there another way for me to create a surface from a jpeg?
i'm trying to create a custom shaped viewport. Instead of using just a rectangular viewport I need to make it polygon shaped. I know I've done it before but for the life of me I cannot remember how. I'm using ACAD MEP 2011.
I want to create a custom linetype for a drawing but am unsure of the best method to use. I only need this linetype for 1 drawing and so I would like it embedded in that drawing if possible. Other people may need access to this file so sending a custom file is out of the question.
Should I create a new .lin file or edit the default acad.lin?
I started to create one using Express Tools and when it prompted me to create / save a new .lin file it defaulted to the 'C:Program FilesAutodeskAutoCAD 2012 - English' folder. I was unsure if to save it here or 'C:Program FilesAutodeskAutoCAD 2012 - EnglishUserDataCacheSupport', where ACAD's .lin is stored.
I would like to create an new custom ipropertie with ilogic. The reason is the contentcenter, thei haven't custom iproperties. How should the code work:
if propertie "test" is available write the value in the propertie else if propertie test isn't available create prpertie write the value in the propertie end if
How can i check if the propertie is already exists in the file?
How can i create a new custom iPropertie?
The rest of teh code is ready and works fine.
i've faund already some code with VBA but not with "pure" ilogic.
How to create a custom ribbon with sketches cmd... I found example for assembly context... it work well but I don't find how to do that in sketch mode... The goal is to control the cmd the user can use.
Is there anyway to create a custom weld symbol in inventor? As of right now I am using a sketched symbol from autocad, but i would very much like to get away from this.
I need a bevel weld back gouged then ground flush on the back side. Cant do that as of right now with the inventor.
How can I create a line type for a PID software signal using a dash line and a filled in circle dash line? I have tried to use the donut feature as a shape file and a filled in circle as a shape file to define my line and neither has worked. what I am trying to create for a line type.
This is the code I am using to save the uid in dictionary. The code executes. Not sure if it saves uid or not. But illustrator crashes when document is closed.