I want to write an overrule to automatically suppress xrecords in extension dictionary while coping but then I test my module, the xreocrd is supressed in the original piece , not the newest one !!
View 8 RepliesI have a dictionary in the NOD with several xrecords. I want to change an entry value in one but the others in the dictionary also get changed. How would they be connected?
This is some simplified code that looks at two xrecords, changes one, then reports the new values. Weird thing is that both xrecords get changed.
For i = 1 To 2 XRecId = MyAppDict.GetAt(i) XRec = trans.GetObject(XRecId, OpenMode.ForRead) ed.WriteMessage(vbLf + "XRecord: " & i & " First Entry: " & XRec.Data(0).value) Next XRecId = MyAppDict.GetAt(2) XRec = trans.GetObject(XRecId, OpenMode.ForWrite) Dim data As ResultBuffer = New ResultBuffer(New TypedValue(DxfCode.Int16, 2), New TypedValue(DxfCode.Text, XRec.Data(1).value)) XRec.Data = data For i = 1 To 2 XRecId = MyAppDict.GetAt(i) XRec = trans.GetObject(XRecId, OpenMode.ForRead) ed.WriteMessage(vbLf + "XRecord: " & i & " First Entry: " & XRec.Data(0).value) Next
Show me a very simple code-example, how to attach an extension dictionary to an AutoCAD Object and add a XRecord?
View 3 Replies View RelatedI am using AutoCAD 2011. When I create a radius dimension on the inside of an arc, and I place the dimension beyond the center point of the arc, AutoCAD automatically draws an extension to the arc and points my radius dimension leader to the outside of this extension, rather than to the inside of the original arc.
I don't really like this. I prefer for my demension leader to point to the inside of the original arc. I can get exactly what I want by going into "Properties" for the radius dimension and turning the "Ext Line" property off.
Rather than having to do this every time, I'd like to create a dimension style that would give me this functionality all of the time. When I try to modify my dimension style, I see that there are just two parameters for Suppress Ext Line 1 and Suppress Ext Line 2. These seem to apply to both linear dimensions and radial dimensions. Is there anything I can do to suppress the extension line for radial dimensions only and not linear dimensions?
We’re using the “save as” function in Adobe Photoshop CS5, and it’s not automatically including the file extension at the end of the name because our file naming convention (M##.B##.F##) uses periods. This is an issue which was already discussed in the forum [URL] ..., but there didn’t appear to be a suggested fix.
View 2 Replies View RelatedEach time I use the "save as" for a file (any extension) it's closed by default, replaced by the the saved file. Because I use a .pdn file as a base to create many .jpg files I would like the file I just "saved as" not to be close automatically. Otherwise I have to open it again via "recent files..."
View 16 Replies View RelatedWhen saving tiff files in CS4, how can I have file names automatically created with ".tif" extension. Currently they are saved as non specific file types unless I include, or later add, ".tif" every time.
View 12 Replies View RelatedI am trying to get a simple rounded bullnose cantilever running down the sides of a curved 3D solid block. I have tried SWEEP, LOFT, FILLET, etc. and following various tutorials did not work when applied to this shape...
I have attached the basic shape of the bullnose I desire to the 4 corners of the block.
I have used both AutoCAD 2007 on my PC and 2011 on my MAC.
The file is here: [URL] .......
I have just upgraded from CS3 to CS5 and I'm running into a major issue. When I used to copy charts from Excel into Illustrator CS3 it would paste in as vector artwork, but now with CS5 it pastes in as a jpeg image.
I'd like the excel charts to paste in as they used to with CS3 as vector artwork with paths, strokes and text.
How do I move or copy photos from iPhoto to Lightroom 5?
View 2 Replies View RelatedI'm learning how to create extension (flex - extension builder) for Illustrator and how to make it communicate with a plugin.
The samples provided in the SDK detailed how to load /unload extension from a menu item from Illustrator, and how to add / remove EventListeners to make the magic happen.
to sum up, this is something like that:
1- click on the menu item
2- load extension
3- add listeners
4- do your stuff......
5- remove listeners
6- unload extension
Basically my plugin is a module/service which is in charge of dealing with / modifying artwork tree. It has no User Interface.
My extension will have a user of this service.
What I would like to do is to load my extension as soon as my plugin is loaded, and unload the extension when the plugin will be unloaded.
Or notify when extension is loaded or unloaded.
Is that possible and hw could I achieve that?
Words will not add to the dictionary? Is this something Autodesk have broken?
English UK dictionary.
After installing AutoCAD on 3 new Windows 7 workstations, one of them can't find the main dictionary. I can find dictionaries (*.dct) by using the Windows Search function, but when I try to specify a path with the Options command, I'm told that there are "None available". What do I need to do to get a dictionary path loaded?
View 9 Replies View RelatedHow to create and populate a new custom dictionary in with vb.net. None of the examples I could find (that I think would work) were written in vb and weren't very well documented. So I guess what I would like is a push in the right direction.
View 9 Replies View RelatedI'm using Inventor 2011 and I can't figure out how to set my dimension settings so it breaks the dimension extension lines automatically when crossing over other dimension extension lines. I saw that others say it just happens, but it is not "just happening" for me. how to set my dimensions so when dimension lines cross each other one of them automatically breaks?
View 9 Replies View RelatedHere's the Code I have so far:
I want to iterate through the Image Dictionary and Connect into the Raster ImageDef Properties.
I want to be able to modify and fix missing Raster Images.
How to get this code sorted out.
For Each myObjID As ObjectId In myModelSpace
Dim myEnt As Entity = myObjID.GetObject(OpenMode.ForRead)
If TypeOf myEnt Is Image Then Dim myRasterImg As RasterImage
Dim myRasterImgDef As RasterImageDef 'Open The Dictionary
Dim ImgDict As ObjectId = RasterImageDef.GetImageDictionary(DatabaseIn)
For Each dictEntry In ImgDict NextEnd If
i have a set of prints (4 seperate files) and when i try to eport them to pdf, i get a error stating:
Job: - Error(s) Did Not Plot
Job ID: 1
Sheet set name:
Date and time started: 9/25/2013 7:05:02 AM
Date and time completed: 9/25/2013 7:05:03 AM
UserID: X.X
Profile ID:
Total sheets: 1
Sheets plotted: 0
Number of errors: 1
Number of warnings: 0
Sheet: B-0193-1-Model - Error(s) Did Not Plot
File: Z:EngineeringPRINTSBPRINTSB-0193-1.dwg
Category name:
Page setup:
Device name:
Plot file path:
Paper size:
ERROR: Internal Error: Failed to get Plot Settings Dictionary.
The file was originally created with Autocad 2010 in 2011. i would post the file but it is a customer print and i cannot disclose it here. we are now running up-to-date autocad 2013. this is not a problem with other files i have had to work with (older and newer). just seemds to be a localized event and am wondering if it is that something is corrupt.
when running spell check the tab for adding a word to the dictionary is not available.
View 9 Replies View RelatedHow I can tie a key from a custom dictionary to display in a field?
I know that I can dump the custom dictionary into global and the fields can track those values, but instead of strangling my available memory I'd rather track the dictionary key directly. How can I utilize the Entity name or the actual dictionary name & key?
AIUIDRef uidref=GetUID(GetArt(range));
sAIDocument->GetDictionary(&dictRef);
if(dictRef) {
AIEntryRef entryref=sAIEntry->FromUID(uidref);
AIDictKey dictkey = sAIDictionary->Key("mykey");
sAIDictionary->Set(dictRef, dictkey, entryref);
}
This is the code I am using to save the uid in dictionary. The code executes. Not sure if it saves uid or not. But illustrator crashes when document is closed.
The dictionary in the Character Palette always defaults to English USA in CS6. I have changed the setting Preferences > Dictionary and Hyphenation to English UK, but the Character Palette doesn't change, even though the setting remains changed in Prefs. I have opened each of the New Document Profiles in ..AppDataRoamingAdobeAdobe Illustrator CS6 Settingsen_USx64New Document Profiles (Windows 7) and changed the language in the Character Palette to English UK, and it STILL goes back to English USA!
View 6 Replies View RelatedHow do I change the dictionary to english from Russian?
View 2 Replies View RelatedI am creating one custom plug - in for my project. and for this i want to create one dictionary.In this dictionary i want to store my object and one custom property related to this selected object( exp path item, raster item. etc).
i want to know after closing AI CS6 how can i access the same value what i stored in dictionary.actually i want to create one property for the selected item and want to save and retrieve back. this property.
when trying to set an entry value in an art object's dictionary with AICS6 SDK. I have a native winow handler set on a toolbar where I have set a few buttons.
When I click on the "Outline" button, it is supposed to set an entry (named "FB_CurveType") in the dictionary of the selected art object.
newKey = pAIDictionary->Key("FB_CurveType");
pAIArt->GetDictionary(hArt, &dataDict);
pAIDictionary->SetIntegerEntry(dataDict, newKey, type);
[Code]....
The returned art handle is valid (not NULL) and I can successfully set the value, and re read it immediatly after setting it (even when disposing/re-getting a reference to the dictionary).
The problem comes when I click on "Get Data", it is supposed to loop through each art handle in the document, and check if it has an entry called "FB_CurveType" in its dictionary. Unfortunately, the returned Art Handle's dictionary is empty, and no error code is returned by the SDK functions.I have also noticed that the art handle's value is not the same as the one in the selection code above, at first I thought "Well, maybe that's because Illustrator returns some dynamicaly allocated pointer or something", but when I'm clicking on "Outline" again, the art handle's value is the same as the one in the previous call.
My guess is that my function to get all the art objects in the document makes an older or a pale copy of the real art object. Here is the function :
void GetArtsByType(AIArtType artType, AIArtSet set)
{
AIArtSpec specs[1];
[Code]....
When I spellcheck a huge doc w/ lots of lorem ipsum text spellcheck takes forever.
If I use only one certain block of loremipsum text that's in the spellecheck dictionary it wouldn't stop at those words every time.
A iLogic rule to suppress a sketch? When I suppress a feature, the sketch is not suppressed which cause an error. Although this kind of error does not hurt anything, but I do not want to see any error in my model.
How to suppress the sketch by a rule?
Can not find the table where you can input "suppress feature if this equals 0" and so...
View 1 Replies View RelatedIf I use a linear dimension, and the value works out to something like 4'-1/2", Autocad will display 4'-01/2".
This is the documented behavior per autocad documentation:
Link to Documentation
"If feet are included with a fractional inch, the number of inches is indicated as zero, no matter which option you select. Thus, the dimension 4'-3/4" becomes 4'-0 3/4"."
It is also an extraordinarily silly behavior. How can I force my dims to display 4'-1/2" other than exploding them and editing by hand? ( or by using the "text override" feature )
Is it possible to suppress alternate dimensions below a certain value? I would like my dimensioning to be set up as follows.....
everything above 8 feet
97 1/2" [8'-1 1/2"]
everything below 8 feet
94 3/4"
In VB.net when I send a command to the command line, how can suppress the command line echo?
Is there better ways of sending commands to acad?
acaddoc.SendCommand(
"-STYLE" & vbCr & "SCHNormal" & vbCr & "romans.shx" & vbCr & SCHNormalH + 2 & vbCr & ".8" & vbCr & "0" & vbCr & "No" & vbCr & "No" & vbCr & "No" & vbCr)
how to suppress a pattern in *.iam by ilogic?
I used ilogic to suppress the main components, but the rest are not suppressed.
For example, I have component "A" and make it a pattern (Colum and Row are variable). How to use ilogic to suppress rest not just "A".
Autodesk Inventor Professional 2013 (64 Bit) SP2
Windows 7 Professional Service Pack 1
Intel(R) Xeon(R) CPU E5645
12.0 GB Memory