Photoshop :: Decorative Frame Plug-in?
Oct 17, 2008Is there a plug-in or tool where I can superimpose a decorative frame, like a picture frame, on top of a photoshop image?
View 9 Replies
ADVERTISEMENT
AutoCAD Inventor :: Workflow To Emboss / Cut Repeating Decorative Pattern Into Revolved Solid?
Aug 2, 2013I'm playing around with a part that I'd like to "decorate" with embossed features or perhaps even cut-outs. The actual part, before adornments, looks like a funnel. As sketched now, I'm revolving a spline and then creating a thickened solid feature. I suppose that the variable diameter and varying cross sectional radius of my part increases the level of complexity of this task over a part that looks more like a regular cylinder. I'm hoping to learn a tecnique that will work for revolved parts with highly irregular profiles - not just plain ole cylinders.
So, what I'd like to do is emboss (negative or positive) and/or thru-cut decorative geometric or vine/flower inspired patterns into the outside face of a funnel-like part. (Pic attached.)  I'm picturing some sort of pattern that might repeat around the part. (The variable diameter probably really complicates matters here.)  I haven't put much effort/experimentation into this yet - pretty much because I'm a loss about where to even start.
Photoshop :: Reset DEFAULT Frame Rate In Frame Animation Pallet?
Nov 30, 2012I create animated gifs frequently using the Frame Animation pallet. The default frame rate starts out as 10 seconds, so I always have to change it to 4 seconds. Is there anyway to reset the default frame rate that I start out with to 4 seconds, so that I don't have to change it every time?
Preferences did not yield any promising menus
I know the standard default reset with many Adobe products is to change it without a document open, but in PS CS5.5 if you do not have a document open the frame rate option is greyed out
______________
CS5.5
MacPro Tower
Mac OS 10.8.2
Photoshop Elements :: Apply Frame From Content Section - Frame Goes On Top Of Any Picture
Nov 25, 2012I am trying to add a frame to some pictures, but when trying to apply a frame from the content section, the frame goes on top of any picture...and not directly on to the picture.Â
View 2 Replies View RelatedPhotoshop Elements :: Create A Frame Inside Frame?
Nov 15, 2013How do I creat a frame inside a frame? Elements 4.0
View 2 Replies View RelatedPhotoshop :: Saving Frame By Frame In The Timeline
Jan 27, 2013I am editing a short avi clip converted from a 1959 8mm film in the timeline. The telecine conversion results in as sharp an image as I have manged to get using PPro 5.5 unsharp mask. I tried mocha planar tracking to automatically remove a fixed spider web on the top edge of each frame in the clip. Â
Because the web is not distinct and the background does not progress at a steady fixed pace, the mocha procedure was not successful. Previous feedback recommended methods to mask the edge. Using various masking attempts to automate the procedure was also unsuccessful for the same reasons as mocha.
Â
I have the time and decided to replace the spider web on each frame edge using photoshop tools e.g. clone stamp etc. - although other tools such as healing brush do not appear to work in the timeline as I expect.Â
My saves so far have resulted in a whole clip being saved with all following frames being modified similar to the first edited frame. Perhaps I am not using the editing procedures in photoshop from the timeline correctly.
Â
How do I save frame by frame in the timeline?
Photoshop :: Edit Video Frame By Frame
Nov 19, 2013My band has just recorded our first music video. We are very happy with the result except that the glasses on me (the lead singer) during the close-ups look very funny, they are very skew, and the "frame" does not go behind the ear.
What I would like to do is to import the video and edit these clips frame by frame, where this is showing. There is about 15 seconds totally of me in close-up - 15 x 24= 360 images. The clips are about 1-3 seconds long. And I want to edit all of these short clips of me and then make it a full-length video again.
I made a quick edit on one of the images from the video. The shades still look a little funny but it gets better when the frame goes behind the ear. If it's possible to correct the "glass" part of the shades as well.
AutoCAD Inventor :: How To Split Frame Member On Custom Profile Frame Generator
May 22, 2013After using Custom Profile for Frame Generator, the Part List will show total length, not individually. How to split these frame members?
View 2 Replies View RelatedAutoCAD Inventor :: Frame Design - Trim To Frame Fails With Custom Profile
May 20, 2013I created an extruded aluminium profile (attached file: Item Profile 8 80x80) which I published into the Content Center. When using this profile in a frame design, and using the Trim To Frame command, the profiles are trimmed at a weird angle (attached pdf file).
View 2 Replies View RelatedAutoCAD Inventor :: How To Split Frame Member On Custom Profile Frame Generator
Apr 30, 2013After using Custom Profile for Frame Generator, the Part List will show total length, not individually. how to split these frame members?
Inventor Professional 2013 SP1.1
Windows 7 Pro 64-bit, SP1
HP EliteBook 8460w; 8 GB RAM; i7 - 2.0 GHz; AMD Firepro M3900 -1 GB
CorelDRAW / DESIGNER SDK :: How To Convert Frame Into Empty Text Frame Using Macro
Dec 17, 2013how to convert a frame into an empty text frame using a macro?
View 1 Replies View RelatedAutoCAD Inventor :: Notch Or Miter A Straight Frame To Curved Frame
Dec 13, 2011There should be a way to Notch a straight frame to a curved frame! I want to laser cut the tube, so I really need to trim one tube to a curve tube.
View 8 Replies View RelatedAutoCAD Inventor :: When Detailing Generated Frame View Shows Elongated Frame Members
Jul 26, 2012I come across this problem from time to time and generally either just ignore it, if the detail is destined for in house manufacture, or alter it in autocad if it's destined for exterior suppliers.
Our guard frames are manufactured from extruded aluminum section (made by a company called palletti) I have when needed created a new frame generator frame member for each new x-section that we wish to use. I then draw a 2d sketch for the base frame skeleton and then a 3d sketch for all the frame work above. This I then use in an assembly to create the framework. This framework assembly then goes into a second assembly where the framework is then adorned with all the accoutrements that make up a guard frame that we can then order as an assembled frame, panels feet, hinges et al.
When placing the views for the detailing of the second assembly sometimes the view will show the wrong length for one or some of the frame members.
;note how the left and right views are different and how some of the frame members are elongated on the lh view.
 I'm guessing its because of the home grown frame members but all seems to work well other wise and this only happens infrequently.
HP z210 16Gb ATI FirePro5800
Autodesk Produst design Suite 2012
AutoDesk Smoke :: How To Move Clip In Timeline Frame By Frame
Aug 31, 2011I'm working on a german keyboard.
Smoke 2012 SAP2 SP4
and
Smoke 2013 SP2 (Smoke Classic Keyboard Shortcuts)
Mac Pro 4,1
OS X 10.6.7
12 GB RAM
NVIDIA Quadro 4000
14 TB RAID (Areca)
Illustrator :: Scale Border Or Frame Without Scaling Frame Width?
Aug 23, 2012I'm designing some photo frames and as they come in loads of different sizes, I'd like to be able to make the frame design bigger, in illustrator, but keep the width of the actual border. i.e. at the moment it's for a 10cm x 15cm photo with a 3cm wide border going all the way round - I want to keep it 3cm for larger photos.
and here's a link to the .ai file: [URL] I have loads of other frame designs which will need similar treatment so I'm looking for a general solution rather than something that is totally specific for this design.
Premiere Pro :: How To Make Audio Play When Move Frame By Frame
Jan 5, 2014It used to be that whenever i would move the cursor in adobe premier with either the left or right arrows or by simply clicking and dragging it, it would play the audio from that frame. But it is not doing it anymore, I think i must have accidently hit a shortcut key or something to change it in settings i dont know. But it would be good if I could get the setting to change it back. I know for a fact that my laptops speakers do work, so its not that.
View 1 Replies View RelatedPhotoshop :: Frame To Frame Animation
Apr 3, 2009I'd like to do some animation in photoshop, especially frame to frame animation. (such as editing images from stop motion)
But I'd like to import big quantities of images to a psd file, and which each image would automatically be imported to 1 different layer. Is it possible to do that?
The photos are fairly too high resolution to export as video (3456x 2034) so i don't want to make a video out of them and import the video sequence...
Photoshop :: Plug-ins With CS4
Oct 20, 2008Is anybody using Focus Magic or PhotoKit Sharpener with CS4
View 17 Replies View RelatedPhotoshop :: Plug-ins
May 18, 2004I am seeking for the software to buy for an arsenal of filters, textures, and all the other cool stuff we enjoy.
View 9 Replies View RelatedPhotoshop :: Plug-ins For Cs4 64 Bit
Aug 17, 2009if there is any plugins for the above version of photoshop?
View 3 Replies View RelatedPhotoshop :: PCD Plug-In
Mar 3, 2009I have many PCD files that I am unable to open in PS CS4.
where I can obtain a plug-in for the File Formats folder.
Photoshop :: Plug-in?
Nov 15, 2002I can't find liquify, its in the folder but i cant find it in the list
View 3 Replies View RelatedPhotoshop :: Plug-ins(KPT 5)
Aug 21, 2002Being very, very new to Photoshop, could anyone tell me where to find plug-in‘KPT 5.0’
I’ve downloaded the 5.01 update files but can’t find ‘5.0’ to update!
I already uploaded this question but it seems to have gone !?
Photoshop :: RAW Plug In
Feb 27, 2004I have installed the RAW plugin. It shows up in the help plugins. I did the preferences scratch and plugin etc. Will not open my RAW, which are really CRW files from my Canon 300 DSLR. What am i doing wrong?
View 6 Replies View RelatedPhotoshop :: 3D Plug-in
Apr 2, 2005I need to know how to install this plug-in from my photoshop CD. I follow all the steps, but still have a problem when I open up PSCS -- error message saying that some kind of .dll file cannot be found. I unzip the file (I think) and move the folder to the "plug-ins" folder in Photoshop program file.
I am able, however, to open photoshop despite that error message, but I don't see the effect under Filter>Render, where it says it will be. Am I missing an actual installation step and if so, where does it tell me to actually install the 3D filter? I had to make a cube for a class I'm taking and I made it, but freehand and a lot of transforming.
Photoshop :: PS Plug In?
Jun 4, 2003I am trying to locate a third party plugin for PhotoShop that was described to me by someone who had seen a website on it but did not remember the URL. Supposedly the manufacturer of the plugin had contacted the makers of a number of digital cameras and had incorporated profiles of each of them in the software, so that many of the problems of digital imaging (noise, grain, etc) were easily corrected with one click.
View 1 Replies View RelatedPhotoshop :: Use Of Plug-ins On CS4
Mar 14, 2009I have adobe CS4, windows vista and Nik software plugins.
The plugins installed fine and I can open and use them in photoshop. However, when I click on "Ok" to apply the filter in photoshop, it shows as applied in the history states but it hasnt actually applied it to the photo.
The graphics cards is an ATI radeon HD 3650 and seems to be recognised by CS4 and am using open GL.
Photoshop :: Plug-Ins ..
Aug 31, 2005Two of my coworkers were arguing about this and I have no idea about it...
Are PC and Mac PS plugins able to be installed in either machine?
Can I take my Mac plugins and put them in a PC?
Photoshop :: How To Use Plug-ins?
Apr 23, 2006how to use photoshop plug-ins?
View 1 Replies View RelatedPhotoshop :: Plug-ins In Cs4
Apr 20, 2009I've been using photoshop since version 5.. so I did what I've always been doing with my 3d party plugins.... stick em in the plugins folder but nothing happens.....I spent the whole day trying to figure out why.... in any istructions come with the plugins it was just saying to do the same old thing..... so does any body have any ideas why it wont work...?Does it matter that I got 64bit windows?....
View 2 Replies View RelatedPhotoshop :: What Plug-ins Do You Use
May 10, 2003been using PhotoShop for mabye a year and a half and was just wondering what plugins people here used, and what kind of work you used them in (website graphics, logos, abstract art, etc)
heres what i usually like to use..
KPT7 - if ya dont know and have never used these u dont know what your missing.. espically hypertiling and fraxflame
Master Blaster - great free color plugins.. come in yellow, green, red, blue, violet.. 3 filters in for each color (hue tint and background) plus 3 mixer plugs which mix RGB in really odd ways..
Flaming Pear - Flood, a really cool water plugin... Lunar Cell - Makes planets and moon like objects. Solar Cell - makes stars and suns.. I haven't really used too many other plugs from these guys but im sure they all rock..